ZoneMinder Forums

hi,
i have purchased an kodicom 4400, its running but in B/W .
after starting xawtv and turning on "Chroma agc" can see coulors again, but after system restart is it B/W again!!
any idea?
Thanks

hi, i think i will by a new one, it will be an kodicom 4400r or this one:
Hier dou you know it?
Thank you for your help

Hi Cordel,

cordel wrote:You either set it in bios or move the card to a different slot.

i have try it but bttv0...btt03 are alwas sharing "ports" with other devices ist that a problem??

hi, this is finaly a Digi-flaower capture card FD2000-2400!! but i cant find any docs or installation guides under linux.
how can i change irq/pci sharing in bios...?
thx

nevermind, here is the scanpci -v log, im a newbie in linux, help me plz spock@ZmBox:~$ sudo scanpci -v [sudo] password for spock: pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1039 device 0x0735 Silicon Integrated Systems [SiS] 735 Host STATUS 0x2210 COMMAND 0x0007 CLASS 0x06 0x00 0x00 ...

If you run and post a snip of the results for the capture card of lspci -vv some one might be able to help, otherwise we are guessing like you are. Also moved this to it's own topic as it is rude to hijack someone elses thread. Thanks, Corey hi Cordel i have pastetd the hole lspci -vv log above ...

morning @ all, its me again, my displays are stil blue, i have some logs for you, help me plz spock@ZmBox:~$ sudo zmu -d/dev/video0 -q -v Video Capabilities Name: BT878 video ( *** UNKNOWN/GENER Type: 171 Can capture Can tune Overlay onto frame buffer Can clip Scalable Video Channels: 4 Audio ...

Are you sure you have the cam on /dev/video1 chip and not on one of the others? i have tested all of the 16 inputs and every chanel with different video settings and mods!! Are you sure that the card has been detected and setup by the kernel correctly. dmesg |grep bttv shows an ...UNKOWN/GENERIC ...

Most likely each chip has four inputs/channles (0 to 3), have you defined these? Would be like caladeira posted above. Your last post would suggest you overlooked them. i have defined 5 monitors; philips monitor /dev/video0 (0) <--- philips webcam plugged work input01 digiprotect1 monitor /dev ...

hi, i have updated the link, is a pdf datasheet. ubuntu detects the usb webcam on /dev/video0 from the card 4 inputs: /dev/video1 i have here pluged a visortech cam model: an380mc /dev/video2 /dev/video3 /dev/video4 the video feed is working well (on a tv via the composite output from the card) but ...

Hi, i have this card http://security-center.de/de/espkat/docs/tv8807.pdf is a german site, 100 pic/s the philips usb webcam is now streaming, i have just switched to yuv420p :wink: /dev/video0 the other cam which is plugged on the tv8807 is still strickin dmesg |grep bttv shows an ...UNKOWN/GENERIC ...

Hi @ all, im a new user, after several weeks and retries i have finally installed zm under ubuntu 7.10 with success, but i have a problem with it; i have a digitalprotect pci capture card with 16 inputs (2 serial ports). My problem is i can only see bluescreens with date and camname. how can i solv ...