ZoneMinder Forums

Apache running proxy for access from WAN (https). Console shows fps, montage or single camera view does NOT! Don't spot the variable being passed in this snippet of html source (have not looked very deep)???: <div id="monitorState">State:&nbsp;<span id="stateValue"></span>&nbsp;-&nbsp;<span id ...

Update: Installed 2019-09-26-raspbian-buster-lite.img (did not apt update/upgrade) Setup: zoneminder1.32.3 cpan Number::Bytes::Human vi /usr/bin/zmpkg.pl changed to read: runCommand('zmdc.pl start zmaudit.pl -c -f'); rsync sdcard rootfs to SSD partition2 edit /boot/cmdline.txt with SSD PARTUUID-2 ...

No go on the upgrade after complete removal of ZM and dependencies first. The Zeros stream to laptops and ZMXENVM 1.32.3 fine.

I turned debugging, so I may end up with a post or 2 on ZM 1.34.x

Install of OS went fine, haven't checked ulimits etc, will do next w/debug

Thanks again.

Upgrading now.

Thanks @snake

https://storage.jamesachambers.com/benchmark/13008 Installed raspbian buster lite, decided I needed Pixel, Chromium, VLC Followed this: https://wiki.zoneminder.com/Raspberry_Pi_4_-_Raspbian Have a handful of Zeros (5fps) running h264_v4l2_rtspserver. Have a Debian Xen VM running (same v1.32.3) great ...

Ring for the lazy light-hearted, ZM CAN rule the roost!

https://gizmodo.com/ring-and-amazon-sue ... 1840679316

E'nuf said!

I was running 24 bit color. The load was over 4 w/1.33, temp was @75 on both cpu and gpu Re-installed 1.32 from rasbian repos: Device: Raspberry Pi 4 Model B Rev 1.1 HW Rev: c03111 CPU ID: 10000000a0791a3f Uptime: 14:10:56 up 3 days, 3:47, 2 users, load average: 1.23, 1.25, 1.27 CPU Freq Status ...

My understanding is with a Pi you can't use video writing. Use jpeg's instead. Link? I've disabled Storage->Video writer On another note, had to use Libvlc, no idea why ffmpeg isn't working: Unable to convert format 0 yuv420p linesize 39925392 height 768 to format 26 rgba linesize 40086880 at frame ...

Just another FYI: In 1.32 I used ffmpeg/H264 passthru, in 1.33 using libvlc (h264 passthru no workie). Load went from 2 to <completely-out-of control> on this little RPi. 1.32 on a Xen VM, 3GHz, 4M ram, to RPi 4 w/4G, 1.33 w/4G ram overclocked to 2GHz cpu, gpu at 750, using external usb 3 HD. On 1 ...

A little FYI: Setting up zoneminder (1.33.16~20191223164339-buster) ... Detected db service is mariadb.service mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: NO)' Creating zm db ERROR 1045 (28000): Access denied for user 'root ...

Also noticed in "console" not showing total bandwidth.

Same issue on RPi 4 (updated from 1.32 today - which was working) using FF 71.0 on Tricia and Vewd on XBR 900f Running 1.33.16 via deb https://zmrepo.zoneminder.com/debian/master buster/ (zoneminder_1.33.16~20191224.21-buster_amd64.deb). 4 zeros running rtsp and one Pi B Poking around in options ...

Working *great* now!

Increase GPU memory:

/boot/config.txt

gpu_mem=512

Nobody? CPU's are about idling, 3G ram free, no swapping. From sysadmin point, everything looks good. I upgraded the usb3 7200 rpm WD, using the known to work adapter - StarTech SATA to USB Cable - USB 3.0 to 2.5” SATA III Hard Drive Adapter (USB3S2SAT3CB) , no usb timeouts, kern.log is clear as a b ...

going from one rtsp feed to two?

Please!