ZoneMinder Forums

Execute the following command: and zmu will work. You may need to add/edit an entry in /etc/sysctl.conf or one of the files under /etc/sysctl.d/ to preserve the setting after a reboot.

Run the following: sudo sysctl fs.protected_regular The output should be: fs.protected_regular = 0 If it isn't then run the following: sudo sysctl fs.protected_regular=0 and everything should work. Have a look at /etc/sysctl.conf and the files under /etc/sysctl.d/ and you will probably find an entry ...

It's possible that your capture daemon is slow to start and as a result it hasn't initialised the shared memory when the analysis daemon starts up. The analysis daemon spots this and exits producing the first error message. The second message is produced by zmdc which is monitoring all the daemons ...

You might already be able to do that.
Set up to 2 monitors, one for the sub stream and one for the main.
The sub stream detects the motion and triggers the main one to record.

You could enable zmtrigger and then in Node Red use a TCP in Node to connect to zmtrigger to get the events real time. EDIT: I though getting Zoneminder events into my home automation system might prove useful to me so I put together a couple of nodes to do it. Here they are, you might find them ...

Can you goto the following url on your camera and post the output?

The OS caches file data in memory to save on disk acceses and speed things up. If the running processes need more memory the cache size will automatically reduce. Run the "free" command jupiter-1009 $ free -h total used free shared buff/cache available Mem: 62Gi 5.8Gi 3.2Gi 4.0Gi 53Gi 52Gi Swap ...

You need to set the date.timezone setting in the php.ini files. You should be able to find them with the following command.

Open a terminal and run If your disk does not appear in the list then it isn't mounted and isn't accessible by Zoneminder.

You have enabled "Can move continuous" and the control script can't do that.
See the post by "giantskorpion" in the thread you link to for the correct settings

The zmLoadUser function in zm_user.cpp has this section of code: if ( mysql_num_rows(result) == 1 ) { MYSQL_ROW dbrow = mysql_fetch_row(result); User *user = new User(dbrow); mysql_free_result(result); if ( (! password ) // relay type must be none || verifyPassword(username, password, user ...

I just tryed to get the DS-2DE3A404IW-DE/W working. Configured are the following settings: https://i.ibb.co/XD6chNG/ptz.jpg But its not working and the logs are spammed with: 2020-08-26 04:40:02 zmcontrol_7 16709 FAT No protocol is set in monitor. Please edit the monitor, edit control type, select ...

The HikVision URL is usually something like this: rtsp://user:password@192.168.1.15/Streaming/Channels/101/ Use /101/ for channel 1 and /102/ for channel 2. If you want to test it then you should be able use that URL with ffplay or VLC or some other video player. I have a HikVision bullet carmera ...

If it is a WiFi camera then see this thread: viewtopic.php?f=36&t=27130

I think its a wifi issue. The camera loses its wifi connection long enough for it to close the stream to zoneminder. Because the wifi is down zoneminder is never told about this and sits there just waiting for data on what it thinks is a good connection. If you are unable to improve the wifi ...