ZoneMinder Forums

No it does it on 10 different computers... That an these are CAD workstations with Nvidia FX1700 cards.. My Dell Laptop does the same time. IE or FireFox same thing.. its also in the video if you pull up a still recorded image.

I am getting horizontal lines in my video but only were there is motion. I am not sure what the issue is. Its visible in the live view as well as the motion recordings. I have a Ubuntu 9.04 Server running the lastest build of 1.24.XX (cant think if the exact verision at the moment but its the latest ...

I had it running on 64bit Ubuntu but it crashed A LOT... However there may have been some other issues. Your milage may vary.

After posting that I went back and reread what the WiKi says.. It DOES NOT clearly explain that. Here is what it says. Function This essentially defines what the monitor is doing. This can be one of the following; None – The monitor is currently disabled and no streams can be viewed or events gene ...

AH I see that explains A LOT... I probably have the settings whacked now from trying to keep it from recording... I thought modect only generated events and no video. I must have read the different modes in the setup 10 or 15 times and it didn't sink in....

I'll try that at work tomorrow.. THANKS!

I have Zoneminder installed on an Ubuntu server per these instructions: http://www.zoneminder.com/wiki/index.php/Ubuntu_9.04_server_32bit I have 2 bt878 based cards with each having 8 BT878 chips with one 30fps video port each. All the video works. Video recording works great. Both of my PTZ cameras ...

chmod did not change anything. Further more I installed 1.24.2 and now the PTZ option is GONE. What is going on? Is it being phased out? -Andrew I did a full reinstall from the source following the instructions on the Wiki. After setting the port speed correctly it started working. The original ...

chmod did not change anything. Further more I installed 1.24.2 and now the PTZ option is GONE. What is going on? Is it being phased out?


-Andrew

kingofkya wrote:try this

sudo chmod 777 /dev/ttyUSB0

I will try that first thing when I get into work in the morning. I never even considered user permissions as part of the problem.

Looks like I'm missing a file or something?????? 07/02/09 16:31:25.060076 zmcontrol[4009].INF [Starting control server 1/PelcoD] 07/02/09 16:31:25.065492 zmcontrol[4010].INF [Control server 1/PelcoD starting at 09/07/02 16:31:25] 07/02/09 16:31:35.144128 zmcontrol[4009].FAT [Can't connect: No such ...

i now it nota driver issue because if I type: 'echo -e -n "\0377\0001\0000\0004\0034\0000\0041" > /dev/ttyUSB0' then the camera starts turning... The settings for the camera are 9600 8n1. What are the defaults for Zoneminder? If I type: stty -F /dev/ttyUSB0 i get: speed 9600 baud; line = 0; -brkint ...

I am fairly new to Zoneminder. I have a freshly installed Ubuntu 9.04 with Zoneinder 1.24.1. I have 2 bt878 cards with 8 ports each and each card has chips so I have a total of 16 * 30fps each analog inputs. I was able to get the video inputs working fine with a quick edit of modprob.conf. Now I am ...