ZoneMinder Forums

Hi, i cannot access the camera right now, but if i remember correctly you can check on the camera the hardware revision.

well another update

it seems that if i set the camera on CBR ( constant bit rate ) and i frame key at 15 frames and running 15 fps no more pink rubbish on the stream.

all looks good so far.

Hi, i have some COTIER IPc-631/T13 ip camera all working with zm 1.30.x set like in this topic (https://forums.zoneminder.com/viewtopic.php?f=10&t=22386&p=89691&hilit=littlej#p89691) The problem is after a while the stream gets all pink and wont get back only if i disable the monitor and re-enable ...

update... after some time this is what happens and i have no idea how to solve it for now

i am open for suggestions.

thanks

check my post : viewtopic.php?f=10&t=22386&p=97549#p97549

Hi arymar, thanks for the update. I have updated my cotier firmware using latest version from here : http://www.en.tpsee.com/deviceupdate/95-1.html ( TH38C5/R6_ONVIF_P2P_firmware_V2.5.1.12 ) at least this suits my camera. Since update i find the stream more stable and available at main: rtsp://admin ...

i had sampe problem when going from 1.28.1 -> 1.28.108

check my post : viewtopic.php?f=32&t=23679&p=90586&hili ... ent#p90586

upgraded to 1.29 hoping this solved the problem but still not working.

Hi, i have a Vivotek PZ6122 and it used to work on zoneminder 1.28.01 with the following settings : Source Remote : http / simple host name : user:pass@ip host path : /cgi-bin/video.jpg widh/height 352 / 288 I upgraded to 1.28.108 and it stopped working, now i get the following error message: 2015 ...

ok, so disk percent works now, it seems it is not working with a symbolic link anymore, i had to edit the path options in zm.

Hi, i just installed 1.28.108 on ubuntu 14.04 but now i have a problem with disk percent. My cams are recording ok but disk percent does not increase, check the attached (untitled) file and this is my df output : Filesystem Size Used Avail Use% Mounted on /dev/sda2 143G 19G 118G 14% / none 4.0K 0 4 ...

i have same problem, but this appeared when i upgraded zm to 1.28.107, my load went from ~1.5 to almost ~3.5 only with a zoneminder upgrade

Hi, i upgraded to 1.28.107 and now my mysql is using 100% from one of my cpu : PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1029 mysql 20 0 2401336 180956 4180 S 99.9 4.5 16411:37 mysqld now my load went from ~1.25 to ~3.50, also i have some vivotek pz6122 wich worked well on previous ...

Hi, i have installed ubuntu + zoneminder like specified a few posts back under vmware I have a Foscam FI9818W and in vlc i can see the stream at rtsp://user:pass@ip:88/videoMain if i set it up as ffmpeg it works ok at full resolution 1280x720 but i cannot set it as libvlc i get the following warning ...

Hi, can anyone help me modify the filter purge when full to run only at night time for example only from 00:00 till 05:00? I will give it a try to set it up like this (see attached file) but i would like to know if this will work, is there any wiki documentation about filters? i'm not very familiar ...

Just as an update.

Installed this camera for some time now and it's pretty stable so far but the downside is the night vision, wich is totally useless and i mean useless I have it running outside at a range of ~15m and you cannot see anything