ZoneMinder Forums

Remote possibility but check the value of options::debug::RECORD_EVENT_STATS. It should be ticked, if not: tick and restart. The lack of the red outline usually is an unticked value for Options::config::CREATE_ANALYSIS_IMAGES. Worth a quick look anyway options::debug::RECORD_EVENT_STATS is ticked ...

No one of the cameras is in "Record" mode; three are in "Monitor" mode and the other one is in "Mocord" mode, but is wich records continuous.

I don't think: Events and images are stored correctly (I think), If you check the timeline, moving the cursor around the time zone (the red wide line), you can see how the images change (just like a film). The problem is that most of times, there is no real alarm; there is nothing wich triggers that ...

Hi! I've got exactly the same problem; what should I check? how? I'm a newcomer to ZM (and Ubuntu); in fact ZM is the reason why I started to try Linux sporadicly. I did my ZM fresh install following this manual (http://www.zoneminder.com/wiki/index.php/Ubuntu_Server_10.10_32-bit_with_ZoneMinder_1 ...

Hello! I'm trying Zoneminder; some time ago I did a ZM probe setting up with an old Pentium III and one camera; now I'm trying seriously ZM with an (old too) 2.0 Ghz Pentium IV, 768 Mb of RAM memory and (actually) four 640x480 non colour PAL cameras, but I need they will be six or seven. The CCTV ...

I think I've found a possible reason: Looking at the first list of connected devices, there are some of them wich share some IRQ values. I'm trying to find the way to assign only one device to each IRQ. IRQ 11: 00:0c.1 – Multimedia controller: Brooktree Bt878 audio capture 00:0d.1 – Multimedia c ...

I think I've found a possible reason: Looking at the first list of connected devices, there are some of them wich share some IRQ values. I'm trying to find the way to assign only one device to each IRQ. IRQ 11: 00:0c.1 – Multimedia controller: Brooktree Bt878 audio capture 00:0d.1 – Multimedia co ...

Hi! I'm trying to make a cams server with my old Athlon XP 2000+ (512 mb of RAM and 60 gb of total disk space) following the next topic http://www.zoneminder.com/wiki/index.php/Ubuntu_9.10_Server_32-bit For the first time, I connected one Pico 2000 card and two cameras with a clean install of linux ...

After a new fresh system installation, I did: Added to /etc/modules the following lines: bttv bt878 Added to /etc/modprobe.d/options the line options bttv card=77 tuner=4 radio=0 triton1=0 vsfx=0 autoload=0 It looks a good prgress, because now, the first monitor shows the firs camera stream, and the ...

Hello! I've got the same card and have the same problem; I don´t know how to do; I've searched in the web and in zoneminder, and all the solutions I found didn't work. Last thing I found was here http://www.dealextreme.com/details.dx/sku.15758 . This page is where I bought the card, and, at the b ...

Get back to where one camera is working then change the value of "options->config->CAPTURES_PER_FRAME" to 2 or maybe 3. Now create your second monitor. I still have tried it (2 and 4 frames); i disabled the V4l multi buffer too and havn't get any result. One curious thing is that, if I define a ...

It looks like if the card only could attend to one camera; I think it could be a driver problem; I have changed the ports where the cameras are connected, I tried all the settings suggested, and nothing changes; all the monitors show the images from one camera. One thing I don't understand is tha in ...

Nothing changed; I created a file called /etc/modprobe.d/bttv.conf with the values indicated and everything goes like before.

I have not any /etc/modprobe.d/bttv.conf file; must I create it? I have a file called /etc/modprobe.conf, wich I have added in the following line: options bttv card=77,77 tuner=4,4 radio=0,0 triton1=0 vsfx=0 autoload=0 as it's said in http://www.zoneminder.com/wiki/index.php/Pico2000 . The complete ...

This is the card:
http://www.zoneminder.com/wiki/index.php/Pico2000