ZoneMinder Forums

Should have been "tuner=24,24,24,24" not "card=24,24,24,24" and I had thought your original values were correct but formatted incorrectly. Sorry bb99: right is: Changes in options: From card=131,131,131,131 tuner=4,4,4,4 to card=131,131,131,131 tuner=24,24,24,24 reboot the computer and the first ...

Should have been "tuner=24,24,24,24" not "card=24,24,24,24" and I had thought your original values were correct but formatted incorrectly. Sorry bb99: right is: Changes in options: From card=131,131,131,131 tuner=4,4,4,4 to card=131,131,131,131 tuner=24,24,24,24 reboot the computer and the first ...

Ok, so your original card value of 131 works so now change the tuner back to it's original value of 24 (tuner=24,24,24,24) and post results Hello bb99: We did what you suggested and the result is not good...., I think Changes in options: From card = 4,4,4,4 to: card = 24,24,24,24 reboot the ...

We continue with the same problem Well, the only cards that gave me the 16 channels I need, was as follows: Tibet Systems' Progress DVR CS16 (card = 131) , so definitely, we confirm that this is the card we have in place. The cards 133 and 132, never showed us any image Configure the bttv.conf, as ...

Did you give my suggestions a try? Take a look at these and post if either is correct. http://www.zoneminder.com/forums/viewtopic.php?t=14295&highlight=conexant+fusion+878a http://www.zoneminder.com/forums/viewtopic.php?t=15302&highlight=conexant+fusion+878a Or search the forums for "Conexant ...

Hi bb99: Thank you very much for your reply bb99. In the morning, first thing, try to do this you've recommended. Then comment as I have been in luck. Again, thank you very much Before testing recommended by bb99, a colleague told me that the problem we have is that the card is bad or not selected ...

Hi bb99: Thank you very much for your reply bb99. In the morning, first thing, try to do this you've recommended. Then comment as I have been in luck. Again, thank you very much Before testing recommended by bb99, a colleague told me that the problem we have is that the card is bad or not selected ...

If disabling multi buffer didn't work then it's back to basics. All cameras on a single chip (you have four) must be set to the same type (NTSC, PAL), resolution (i.e. 320x240 for now), and the same palette(i.e. RGB, I really would like you to set yours to grayscale for now). Your maximum frame ...

In the zm option page under config find "V4L_MULTI_BUFFER" un check the box Also this is incorrect: gbuffers options bttv card = 16 tuner = 24,24,24,24,24,24,24,24 = 131,131,131,131,131,131,131,131 radio = 0 lumafilter = 1 should be tuner = 24,24,24,24,24,24,24,24 or tuner = 131,131,131,131,131,131 ...

Hello forum, I am Gabriel, Buenos Aires, Argentina My english is very bad, I used the google translator, sorry for semantic errors, so sorry We have 14 cameras, one of them with Pelco D controls. We know that all cameras work well as they were working with a system that we inherited, under Windows ...