ZoneMinder Forums

I have a bttv file, but the install changed it to type=131.. Set it to =77 and it fixed the issue.

Thanks

zoneminder 1.28 , Ubuntu Percise I have a brooktree bbt78 , 4 port card displaying the same camera on all 4 ports, instead of the attached camera. I have tried the following, but still have the same problem. Disable V4L_MULTI_BUFFER (found in options >> config) Change CAPTURES_PER_FRAME to a value ...

I have another new setup of ZM. I am using a Hauppauge USB2 PVR 2 box for capture. In VLC it works fine by choosing channel 1 for composite. However, I have not been able to set up a monitor with it in ZM. I ran sudo zmc --device /dev/video0 and generated some of the following logs right away: 2013 ...

Some how my new zoneminder database became corrupt. I ran mysqlcheck against it, restarted and the video capture worked.

Thanks for the replies

Here is the hardware info. The card has 4 BNC inputs. Works fine with an indoor canon camera on the same input. 01:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) description: Multimedia video controller product: Bt878 Video Capture vendor: Brooktree Corporation ...

I attempted to do a search through the forum, hoping to find settings that work for my VideoSecu camera (BNC), but not able to pull anything up to work with. Wondering if there is a doc of working settings for most cameras ?? Tried many settings using various color palettes ntsc 320x240 and 640x480 ...

Fixed it by following the FAQ on shared memory (http://www.zoneminder.com/wiki/index.php/FAQ) and changing source settings to vl2 with color palette=RGB555

I am having trouble gettinf ZM to work with my Brooktree Corporation Bt878 Video Capture (rev 11) (4 port) This is a new install from svn.zoneminder.com via the following tutorial:http://www.zoneminder.com/forums/viewtopic.php?f=29&t=18479 Log files show the following, but not sure what to do about ...

I am running Ubuntu Maverick and had used apt-get to install zoneminder. Could not get it to pick up on my Brooktree 4 input card, although vlc and awtv worked with it fine. I decided to remove and purge zoneminder and install 1.25 from source. Configure went fine, but when running "make", I get the ...

I had a new PC that I installed Ubuntu Maverick via Windows. I installed zm 1.2.3 or 4 (can't recall), and it worked fine. I decided to do a new install of Maverick outside of Windows and then add zm 1.24. I can't get any video to work, no matter what settings I use. error logs show the following on ...

Yes, that was it.


Thanks

Had to reinstall zoneminder and forgot how I fixed a flickering video problem. Can't seem to find the post that had the solution. I know I had to change a setting in Options. Picture is perfect when I use a single, local camera, but rolls or jumps with a black line when I add a 2nd local camera ...

I have been trying to get an audio alert to play when a filter is triggered . Syslog shows the script is firing off, and I have verified it works manually, but when zonminder launches the script I get the following, and no audio: Mar 31 16:05:12 linuxmint pulseaudio[6466]: core-util.c: Home ...

have you figured out how to launch different script actions based on which monitor was tripped?