ZoneMinder Forums

Many thanks - the webpage is there !

To exclude an error in installing I did a second try: clean install Bookworm install zoneminder according to this instruction ... ... the same problem :( . https://forums.zoneminder.com/viewtopic.php?t=33615 So this is what worked for me. I saw your thread ... and the link in the last posting ...

Hi, today I made a clean installation of Bookworm, setted up samba - and installed zm following this documentation . But the webpage of zm is not reachable ... (a restart of zm seems working...). Then I searched - and found this hint - I edited the red marked entries - but no success. What's to do ...

FYI: I made a backstep and restored the running Debian-11-installation (to be on safe I cloned the system with Clonezilla before upgrading zu Debian-12). I will try a clean installation (Deb 12 + zm) soon...

Thanks.

Thanks ... done ... I got the following messages: ich@debian:~$ sudo a2dismod php7.4 Module php7.4 already disabled ich@debian:~$ sudo a2enmod php8.2 Considering dependency mpm_prefork for php8.2: Considering conflict mpm_event for mpm_prefork: Considering conflict mpm_worker for mpm_prefork: Module ...

One step forward: First apache2 did not run - apache2 error.log: 'caught SIGTERM, shutting down' ... this I could fix. Apache2 is now running ... but the zm-console does not work - 'htt*://IP#/zm/' brings a lot of debugging infos. There are 2 Versions of php - 7.4 and 8.2 - in the system ... maybe ...

Hi, because I did not get an answere to my question here I tried to upgrade my system from Debian 11 -> 12. After the upgrade the system shows an error-message at booting 'failed to start apache2.service' - but zm seems to run (the process is running and the cpu-load is suitable). But apache2 is not ...

Hi,

because Debian 11 (Bullseye) is oldstable now - are there any problems/issues when upgrading to 12 (Bookworm)?

Thx
Centaurus17

I set the "FPS reporting interval" in the section "Misc" in the cameras from 1000 to 300 -> now the cameras are shown als green/capturing further on . Thanks!

I hope there will be a hint how to do the update 1.36.34 -> 1.36.35 at Debian at the right time.

Thanks a lot.

Additional ... I have to specify this issue: I was away from home the past few hours ... ZM did capture my coming home - although the cameras are shown in the console as red & "Not Running" (screenshot above) ... Then I restarted again: the cameras are shown as green/Capturing and after some minutes ...

Hi, I'm running ZM 1.36 for a long time on my Debian 11 (Bullseye) server ... today (after some months) I did an update on Debian, then I rebooted the server. ZM did start correctly, also events are captured (if somebody is walking in front of the cams) ... but the cams does stop working after some ...

dougmccrary wrote: ↑Mon Feb 20, 2023 10:47 amFirst, see if you can change the codec in upper right of screen...

Thanks a lot - one time another Codec than 'auto' choosen in the upper right - it works with all of them (Auto, MP4 & MJPEG).

Thanks again, greetings

Many thanks for your support and patience - partial success: I'm seeing a picture in the console :D . If there ist movement in front of the camera an event is captured :D . At the moment no ERR is reported in the system-console. But if I want to see the captured event - a black screen is shown with ...

Ahhh - I thought we were on source type ffmpeg? As I wrote ffmpeg does work! But it would be interested why protocol RTSP does not work - while this was working in v1.30 at the old installation on Debian 9 (Stretch). Here the working settings from v1.30 on Stretch (you can click to enlarge): https ...

The 4th one