ZoneMinder Forums

Phew! It now works. I upgraded to 1.22.2 and changed ZM_HTTP_VERSION under network to a value of 1.0. I can now pull in the images for default 176x120 And also pull in the larger image eg: 352x240 by using /cgi-bin/video.jpg?size=2 in the remote host path. Now all I have to do is get the PTZ to work ...

You can PM me the details of how to access the cam and I will take a look over the next few days. Hi Phil, I had to change the password from my last PM (Zoneminder objects to an ! in the password) I will PM you the new password. I upgraded to 1.22.2. I also debuged for the D-Link. Here is what I ...

Been away due to illnes.
Not seen any reply - does that indicate no-one can help?

I am more than willing to make the camera available on-line for anyone to test if required. The image downloaded certainly seems to be a valid jpeg...

-Andy

Sorry - I realized I had been running the camera in B/W mode as a test. I put it back to 24 but colour and ran the wget command again: wget -S http://192.168.254.29/cgi-bin/video.jpg > logfile--06:52:55-- http://192.168.254.29/cgi-bin/video.jpg => `video.jpg' Connecting to 192.168.254.29:80 ...

I do not have the option -s on my version of wget. Did you mean --spider? Results with wget -S --spider http://192.168.254.29/cgi-bin/video.jpg > logfile: --18:55:29-- http://192.168.254.29/cgi-bin/video.jpg => video.jpg Connecting to 192.168.254.29:80... connected. HTTP request sent, awaiting ...

I think this may be it. ZMDC.log has:

04/01/2006 10:19:19.994410 zmdc[23660].INF ['zmc -m 2' starting at 06/04/01 10:19:19, pid = 24047]
Not a JPEG file: starts with 0x35 0x39

However the file I get if I run it manually through a web browser is a jpeg file.

-Andy

Unable to find information regarding the debu_target option. I am however seeing this in the zm,log: Apr 1 10:16:20 ryoko zmc_m2[23782]: INF [New Debug Level = 5, New Debug Log = /tmp/zm_debug.log.23782] Apr 1 10:16:20 ryoko zmc_m2[23782]: INF [Starting Capture] Apr 1 10:16:20 ryoko zmwatch[23713 ...

Hi Phil,

I checked the zones, default does exit, however I changed it's size to check, the results are the same.

What debug info should I have sent?

-Andy

OK - I upped the debug level to 5 and turned off the other monitors: 03/30/06 21:57:35.559514 zmu[3594].INF-zm_debug.c/304 [New Debug Level = 5, New Debug Log = /tmp/zm_debug.log.03594] 03/30/06 21:57:35.569164 zmu[3594].DB1-zm_monitor.cpp/1471 [Got 1 monitors] 03/30/06 21:57:35.571154 zmu[3594].DB1 ...

I got a DCS-5300W cheap and thought I would try it. I already have got a Netcam and an Intellinet to work, so I figured how hard can it be?... Having reset the system to default, I ran the firmware upgrades to 1.04. Now, to get an image via a web page I have to enter: http://192.168.254.29/cgi-bin ...