ZoneMinder Forums

Here is what I'm thinking, I started with the CPU since the number of cores are the most important. ASRock TRX80WS AMD Ryzen Threadripper 7960x Montech AIR 903 MAX Noctua NH-U14S TR5-SP6 This will be a headless ubuntu system, will it work without a graphix card? Is there a recommendation for ram ...

Question: Eventually I would like to be able to view cameras on other local devices, phone, etc. Could I safely place a second NIC in the box and use existing Ubuntu/linux SW to firewall off this 2nd NIC so that it CAN NOT be accessed by anything on the 1st NIC, ie. the cameras? This is pretty much ...

Does this mean you are suggesting all cameras to the switch then wifi over to the other building with one server? These cameras will have different uses over time from checking snow height, pooling water to full security, counting people licence plates and motion detection. Current 8 cameras 1080 or ...

I have two buildings that need cameras, I'll be using these https://amcrest.com/4k-poe-camera-dome-ai-ip8m-2493ew-v2.html as needed. One building has eight existing cameras connected to a pvr; probably Hikvision, I haven't worked out if I can get them working with zm yet. What is the best way to ...

I can only find a program called that for windows, is there one for ubuntu? I was able to verify onvif is doing something, when I restart the camera zoneminder puts in the log it can't connect to the camera using onvif. I missed the message and the searching the logs doesn't seem to work, just stays ...

I turned on debug for everything and set it to level 9, there are no entries for onvif. 8/11/23, 4:06:27 PM EDT zmc_m2 402026 DB1 State 1 IDLE because analysis_image_count(1600)-last_alarm_count(0) = 1600 > post_event_count(5) and timestamp.tv_sec(1691784387) - recording.tv_src(0) >= min_section ...

Turns out unchecking OPT_USE_ALARMSERVER got rid of that error These are the settings I have on the Amcrest camera: https://i.ibb.co/qRk4Jnj/Screenshot-from-2023-08-08-21-43-51.png https://i.ibb.co/YyqRz6j/Screenshot-from-2023-08-08-21-44-46.png https://i.ibb.co/G0dbBBb/Screenshot-from-2023-08-08-21 ...

I installed the 1.37.41 version using sudo apt remove zoneminder autoremove sudo apt install zoneminder I added the repository as well but can't find the link at the moment. I am trying to record using the on camera motion detection, I have it setup on the camera. Zoneminder gives me this error in ...

I installed 1.37. It took me a while to figure out how; I thought there'd be a link or something in the download section or the 1.37 sub forum.

I seem to still have the same problem though, I'll post in the other sub forum about it.

Thanks.

I have IP8M-2796EW-AI that works in zoneminder, I can view and record events with motion ect. This camera has it's own motion detection I'd like to use, how do I set this up? I'm not even sure where to look for the problem, I can see in the log files on the camera the events are triggering. Do I ...

I am considering getting this camera https://www.lorex.ca/products/e896ab-4k-deterrence-bullet-ai-poe-ip-wired-camera It has many detection features such as person, vehicle, face, animal; the fine print says face and mask detection require a Lorex network video recorder. The setup instructions I can ...