ZoneMinder Forums

Using pelco "d" instead of diamond protocol, all the advanced features of this camera are available in pelco mode contrary to what honeywell said via tech support?

problem solved!

all working well now didn't need to input in hex just had to extensivley fool with numbers...

I was wondering if you can enter pan/tilt ranges in hex eg: my pan speed is 0x00 full speed 0x80 no speed I entered these above values in the control script entry fields but they were set back to "0" on opening it a second time? Other range values are C0, A7, etc.....

I have some ultrak kd6 ptz domes I need a script written for. Will compensate on arranged price. The protocol looks fairly simple. Honeywell won't release the command structure to me but I have done a serial port capture using a windows ptz app for ultrak and it's pretty good and straight forward.

I'm getting: Tracker daemon 3 (experimental) starting at 05/12/11 10:29:10 Found monitor for id 'HASH(0x8ddd354)' Error, unable to authenticate user Error, unable to authenticate user Got alarm at 26, 169 Error, unable to authenticate user Unknown option: width Unknown option: height Error, unable ...

Two points: a: have the ptz option unavailable during motion detection to avoid false alarms by remote users. I use a saved profile called"armed" that cron controls. Maybe saving "controllable" option in the monitor setup as part of the profile? b: have ptz controls available without "edit" tag on ...

Two points: a: have the ptz option unavailable during motion detection to avoid false alarms by remote users. I use a saved profile called"armed" that cron controls. Maybe saving "controllable" option in the monitor setup as part of the profile? b: have ptz controls available without "edit" tag on ...

At 3am (much coffee) I found a very nice piece of sony software to run the evid30 it had lots of nice features like a readout of data and commands going and coming from cam. It runs fine under wine no problems at all! After running that app my cam worked fine under zm , so I suspect it needed the ...

After two days ,headaches and MANY pots of coffee! :) I have no more perl errors.... no motion either! :) I downloaded and compiled 2 visca based utils to test cam/port libvisca and PTZ_serial , (changed perm. on ttyS0 to all rw). both test/pan/tilt/zoom the cam fine. Libvisca seems to "open" the ...

I finally got my perl working ....along with SerialPort.pm. Now in the /tmp/zmcontrol-visca.log I get this error each time I try to move cam....... --device=/dev/ttyS0 --panspeed=254 --panstep=9381 --command=move_rel_right Can't call method "baudrate" on an undefined value at /usr/local/bin ...

I just did the same install on another fc3 box and it errored on test 135 also exactly the same with a failed install. It can't be machine specific, both high end p4 asus mboards but very diff. chipsets.(via and intel). I know this is off subject and am sorry for that ...
Thanks

It's long, sorry.... Nothing plugged in on both serial ports and ups daemon killed for ttyS1. cpan> force install Device::SerialPort Running install for module Device::SerialPort Running make for C/CO/COOK/Device-SerialPort-1.002.tar.gz Checksum for /root/.cpan/sources/authors/id/C/CO/COOK/Device ...

An update of openssl solved the auth. problem Thanks! I got the SerialPort.pm via cpan and tried to install but it failed testing section saying I have a modem (I don't) so I unpluged my ups and visca cam and killed the ups daemon. Still failed so I did a "force install" ,it staes it's already ...

I have a sony evi-d30 ptz visca cam and after selecting visca in the controls I attempt to use the cam arrows but when inspecting /tmp/zmtrack-3.log I have this error: Tracker daemon 3 (experimental) starting at 05/04/05 16:58:33 Monitor '3' cannot move in map mode, falling back to pseudo map mode ...

Oh yeah! I forgot it's a netcam. I have my eye on a panasonic ptz outddor can model wv-cw864a nice camera with "tracking and motion sensor" but I'm not sure zm will have the correct protocol, it's not totally pelco compatable but is rs435 controlled. I was told that panasonic protocol has been the ...