[Solved] Failure to READ FAQ and /dev/shm

Forum for questions and support relating to the 1.29.x releases only.
Locked
malcolmputer
Posts: 2
Joined: Fri May 05, 2017 3:27 am

[Solved] Failure to READ FAQ and /dev/shm

Post by malcolmputer »

I have 6 Monitors set up for 6 IP Cameras.

5 of the 6 monitors work great, but the 6 one (no matter which camera I choose IP address wise for it) won't ever work.

Is there some 5 camera limit or something? I have made 100% sure that the settings are identical on the 6th monitor to the other ones. I thought it might be CPU or RAM limited, but I disabled a few cameras and that didn't seem to help either.

Any ideas? Am I missing something simple?
Last edited by malcolmputer on Fri May 05, 2017 3:16 pm, edited 1 time in total.
User avatar
knight-of-ni
Posts: 2406
Joined: Thu Oct 18, 2007 1:55 pm
Location: Shiloh, IL

Re: Strange ZM Monitor Issue

Post by knight-of-ni »

While zoneminder is running, show us:

Code: Select all

df -lh /dev/shm
Visit my blog for ZoneMinder related projects using the Raspberry Pi, Orange Pi, Odroid, and the ESP8266
All of these can be found at https://zoneminder.blogspot.com/
malcolmputer
Posts: 2
Joined: Fri May 05, 2017 3:27 am

Re: [Solved] Failure to READ FAQ and /dev/shm

Post by malcolmputer »

Yep, that did it. /dev/shm was 100% usage. I increased RAM to the VM, and also added the 70% utilization fstab entry.

Thanks.
Locked