Zoneminder is freezing with Reolink RLC-511W

[solid]

Hi,

I have a camera Reolink RLC-511W connected in WiFi.
ZoneMinder is installed on a Debian (v9). Debian is a VM installed on my ESXI.

When I add the camera to ZoneMinder, either manually or via OnVIF detection, it is added without any problem.
However, after some time (quite variable), my VM freezes and ZoneMinder becomes inaccessible. I identify that the problem comes from this camera, because by removing it I do not have the problem. On ZoneMinder, I have 2 other cameras (Foscam C1) that work without problems (one in monitoring, one in modect).
Regarding my camera Reolink, the problem occurs whether it is the low-definition stream or high-definition stream. The problem is that the camera is monitoring, modect or record.

Do you have an idea of the problem ?

Best regards.

[banzaay]

Hi,

I have a similar configuration with two Reolinik RLC-511W and one Foscam FI9901EP running on a real server Ubuntu 18.04 with Zoneminder 1.32.

The Reolink are just arrived and I'm testing them but now everything is working fine.
I'm using the standard configuration for the monitor, just set the resolution to 2560x1920.

Bye Mirko

[pms]

I have a similar configuration ... and one Foscam FI9901EP running on a real server Ubuntu 18.04 with Zoneminder 1.32.

Hi MIrko,

Can you give me your settings for Foscam FI99901EP camera?
In my browser I get a nice picture using url:
http://192.168.2.210:88/cgi-bin/CGIProx ... mypassword

But Zoneminder never can contact the camera
Would like to see a working configuration.

Regards,
PMS

[banzaay]

This is my configuration (sorry but is in italian):

FoscamFI9901EP.png (48.21 KiB) Viewed 5443 times

The URL used is:
rstp://<username>:<PWD>@192.168.1.100:88/videoMain

FoscamFI9901EP_2.png (42.24 KiB) Viewed 5443 times

Bye

[pms]

Thanks!

I will test the settings although it looks like I already tried these RSTP:// link as well
Thats why I wanted to use the single image frame option to connect to the camera.

Regards,
PMS