Amcrest IP2M

chuck8530 · Post by **chuck8530** » Thu Nov 25, 2021 4:06 am

Running v1.24.2. I've tried all the suggested configs on the hardware page. Best I can get is a black screen. I was, however, able to get a browser to work with: http://192.168.0.197/cgi-bin/mjpg/video ... &subtype=1

In ZM: Remote, HTTP, Simple, Name: 192.168.0.197, Port:80, Path: /cgi-bin/mjpg/video.cgi?channel=0&subtype=1, 1930x1080 and that gives me a black image. Suggestions please.

dougmccrary · Post by **dougmccrary** » Fri Nov 26, 2021 7:57 am

you could try running nmap on that address to see if there's rtsp support.
Then there's a few things you can try for the stream.
Check the iSpy database - they may have it figured out, or least give you some ideas.

OH, wait...and since you got http working, try leaving out the port 80, if you haven't. Sorry, I don't remember what 1.24 looks like.
You could post a screenshot and maybe we can figure out what goes where.

chuck8530 · Post by **chuck8530** » Sat Nov 27, 2021 6:25 pm

Well the slog'n has gotten me a bit farther. iSpy gave me a line:
rtsp://admin:admin@192.168.0.197/cam/realmonitor?channel=1&subtype=00&authbasic=YWRtaW46YWRtaW4=
and vlc [line above] displays just fine. However when I try to insert into ZM - nada

nmap gave me these: 80 554 1935 8086

dougmccrary · Post by **dougmccrary** » Sun Nov 28, 2021 9:44 pm

It shouldn’t matter, but try…197:554…

chuck8530 · Post by **chuck8530** » Sun Nov 28, 2021 11:30 pm

I've tried Remote & Ffmpeg

Prot: http & rtsp
Method: every one
Port: blank, 80, 554
source path: admin:R0cky222@192.168.0.197/cam/realmonitor?channel=1&subtype=00&authbasic=YWRtaW46UjBja3kyMjI=

Different combinations give me a image: blank(white), or black with "Can't connect" or "Can't stream".

On one of my boxes:

Code: Select all

cat amcam.html 
<html>
<body>
<img src="http://admin:R0cky222@192.168.0.197/cgi-bin/mjpg/video.cgi?channel=0&subtype=1" width=1080>

and that pops right up. And
vlc "rtsp://192.168.0.197:554/cam/realmonitor?channel=1&subtype=00&authbasic=YWRtaW46YWRtaW4="

works. <sigh> Oh, and iSpy works.
Is it possible I'm missing a lib? or a package?

chuck8530 · Post by **chuck8530** » Mon Nov 29, 2021 3:28 am

I found this page: viewtopic.php?t=30024
I cleared everything out and added a Amcrest Preset. Problem: nothing happened - no camera.
So -

dougmccrary · Post by **dougmccrary** » Mon Nov 29, 2021 10:21 am

Jeeze.
What you got on the source page?

Just noticed this - viewtopic.php?f=10&t=30024

might be instructive. Ffmpeg is the right choice.

chuck8530 · Post by **chuck8530** » Mon Nov 29, 2021 4:36 pm

"Just noticed this" - found that a few days ago. I've asked for his config on his camera.

dougmccrary · Post by **dougmccrary** » Mon Nov 29, 2021 8:55 pm

Oops.
Maybe leave the authbasic part off?
But I suppose you already tried that…

chuck8530 · Post by **chuck8530** » Mon Nov 29, 2021 9:39 pm

Ah yup

dougmccrary · Post by **dougmccrary** » Tue Nov 30, 2021 2:08 am

You have a "General" and "Source" page on your 1.24, right?
Would you send screenshots of those to remind me what they look like and maybe remind me of some dumb thing we're forgetting?
Also, does that have the log viewer page?
While it seems unlikely, maybe 1.24 just can't do this camera

chuck8530 · Post by **chuck8530** » Tue Nov 30, 2021 2:53 am

Got it

running Nvidia I had to install CUDA

dougmccrary · Post by **dougmccrary** » Tue Nov 30, 2021 7:58 am

Well! That's weird.
I've not heard where that that was a *requirement*, just a speed-up -

but as long as it works...

ZoneMinder Forums

Amcrest IP2M

Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M

Re: Amcrest IP2M