Problem running zm ['zmc -d /dev/video0' died, signal 6]

Cylindric · Post by **Cylindric** » Thu Jan 19, 2006 11:11 pm

I have done a clean install of ZM on a clean Fedora Core 4 build. I get the following error, and while I'm sure it's something daft I've done wrong, I can't even see where to start looking...

After zmpkg.pl start I get:

/var/log/messages wrote: Jan 19 23:07:34 hercules su(pam_unix)[9692]: session opened for user apache by (uid=0)
Jan 19 23:07:34 hercules zmwatch[9691]: INF [Watchdog starting]
Jan 19 23:07:34 hercules zmwatch[9691]: INF [Watchdog pausing for 30 seconds]
Jan 19 23:07:34 hercules zmdc[9648]: INF ['zmc -d /dev/video0' died, signal 6]
Jan 19 23:07:34 hercules zmdc[9696]: INF ['zmupdate.pl -c' started at 06/01/19 23:07:34]
Jan 19 23:07:34 hercules zmdc[9648]: INF ['zmupdate.pl -c' starting at 06/01/19 23:07:34, pid = 9696]
Jan 19 23:07:34 hercules su(pam_unix)[9692]: session closed for user apache
Jan 19 23:07:34 hercules Update agent starting at 06/01/19 23:07:34
Jan 19 23:07:39 hercules zmdc[9648]: INF [Starting pending process, zmc -d /dev/video0]
Jan 19 23:07:39 hercules zmdc[9699]: INF ['zmc -d /dev/video0' started at 06/01/19 23:07:39]
Jan 19 23:07:39 hercules zmdc[9648]: INF ['zmc -d /dev/video0' starting at 06/01/19 23:07:39, pid = 9699]
Jan 19 23:07:39 hercules zmc_dvideo0[9699]: INF [Debug Level = 0, Debug Log = <none>]
Jan 19 23:07:39 hercules zmc_dvideo0[9699]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.09699]
Jan 19 23:07:39 hercules zmdc[9648]: INF ['zmc -d /dev/video0' died, signal 6]
Jan 19 23:07:49 hercules zmdc[9648]: INF [Starting pending process, zmc -d /dev/video0]
Jan 19 23:07:49 hercules zmdc[9703]: INF ['zmc -d /dev/video0' started at 06/01/19 23:07:49]
Jan 19 23:07:49 hercules zmdc[9648]: INF ['zmc -d /dev/video0' starting at 06/01/19 23:07:49, pid = 9703]
Jan 19 23:07:49 hercules zmc_dvideo0[9703]: INF [Debug Level = 0, Debug Log = <none>]
Jan 19 23:07:49 hercules zmc_dvideo0[9703]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.09703]
Jan 19 23:07:49 hercules zmdc[9648]: INF ['zmc -d /dev/video0' died, signal 6]

And in terminal window I get a nasty memory dump with the following in it:

*** glibc detected *** /usr/local/bin/zmc: realloc(): invalid next size: 0x0f71a
8f8 ***
======= Backtrace: =========
/lib/libc.so.6[0xadf045]
/lib/libc.so.6(__libc_realloc+0x101)[0xadfa30]
/lib/libc.so.6[0xad5e7b]
/lib/libc.so.6(fclose+0xa6)[0xaceb9e]
/lib/libc.so.6(vsyslog+0x17e)[0xb40f63]
/lib/libc.so.6(syslog+0x22)[0xb4137f]
/usr/local/bin/zmc[0x80661e1]
/usr/local/bin/zmc[0x804e44d]
/usr/local/bin/zmc[0x80540e1]
/usr/local/bin/zmc[0x8056f6a]
/usr/local/bin/zmc[0x80630a7]
/usr/local/bin/zmc[0x804b0fb]
/lib/libc.so.6(__libc_start_main+0xdf)[0xa8ed5f]
/usr/local/bin/zmc(__gxx_personality_v0+0x91)[0x804a841]
======= Memory map: ========
00101000-00146000 r-xp 00000000 03:05 3254736 /usr/lib/mysql/libmysqlclient.s
o.14.0.0
00146000-00220000 rwxp 00045000 03:05 3254736 /usr/lib/mysql/libmysqlclient.s
o.14.0.0
00220000-00223000 rwxp 00220000 00:00 0
00223000-00241000 r-xp 00000000 03:05 2576091 /usr/lib/libjpeg.so.62.0.0
00241000-00242000 rwxp 0001d000 03:05 2576091 /usr/lib/libjpeg.so.62.0.0
00242000-0024d000 r-xp 00000000 03:05 2581065 /usr/lib/liba52.so.0.0.0
0024d000-0024e000 rwxp 0000a000 03:05 2581065 /usr/lib/liba52.so.0.0.0
0024e000-0024f000 rwxp 0024e000 00:00 0
00251000-002c0000 r-xp 00000000 03:05 2572403 /usr/lib/libavformat-CVS.so
002c0000-002c5000 rwxp 0006f000 03:05 2572403 /usr/lib/libavformat-CVS.so
002c5000-0030a000 r-xp 00000000 03:05 2593623 /usr/lib/libmp3lame.so.0.0.0
0030a000-0030d000 rwxp 00044000 03:05 2593623 /usr/lib/libmp3lame.so.0.0.0
0030d000-00362000 rwxp 0030d000 00:00 0
00362000-003f7000 r-xp 00000000 03:05 2586888 /usr/lib/libxvidcore.so.4.0
003f7000-003f8000 rwxp 00095000 03:05 2586888 /usr/lib/libxvidcore.so.4.0
003f8000-0046b000 rwxp 003f8000 00:00 0
0046b000-0047d000 r-xp 00000000 03:05 1432078 /lib/libnsl-2.3.5.so
0047d000-0047e000 r-xp 00011000 03:05 1432078 /lib/libnsl-2.3.5.so
0047e000-0047f000 rwxp 00012000 03:05 1432078 /lib/libnsl-2.3.5.so
0047f000-00481000 rwxp 0047f000 00:00 0
00486000-00487000 r-xp 00486000 00:00 0 [vdso]
00487000-006ee000 r-xp 00000000 03:05 2587706 /usr/lib/libavcodec-CVS.so
006ee000-006f5000 rwxp 00266000 03:05 2587706 /usr/lib/libavcodec-CVS.so
006f5000-0074d000 rwxp 006f5000 00:00 0
0074d000-0076a000 r-xp 00000000 03:05 2572226 /usr/lib/libtheora.so.0.1.0
0076a000-0076b000 rwxp 0001c000 03:05 2572226 /usr/lib/libtheora.so.0.1.0
0076b000-00805000 r-xp 00000000 03:05 2583403 /usr/lib/libmp4v2.so.0.0.0
00805000-0080b000 rwxp 0009a000 03:05 2583403 /usr/lib/libmp4v2.so.0.0.0
0080b000-0081a000 r-xp 00000000 03:05 1432096 /lib/libresolv-2.3.5.so
0081a000-0081b000 r-xp 0000e000 03:05 1432096 /lib/libresolv-2.3.5.so
0081b000-0081c000 rwxp 0000f000 03:05 1432096 /lib/libresolv-2.3.5.so
0081c000-0081e000 rwxp 0081c000 00:00 0
0081e000-00827000 r-xp 00000000 03:05 1431988 /lib/libnss_files-2.3.5.so
00827000-00828000 r-xp 00008000 03:05 1431988 /lib/libnss_files-2.3.5.so
00828000-00829000 rwxp 00009000 03:05 1431988 /lib/libnss_files-2.3.5.so
00939000-0093b000 r-xp 00000000 03:05 1432097 /lib/libcom_err.so.2.1
0093b000-0093c000 rwxp 00001000 03:05 1432097 /lib/libcom_err.so.2.1
0093e000-00942000 r-xp 00000000 03:05 2580773 /usr/lib/libogg.so.0.5.2
00942000-00943000 rwxp 00003000 03:05 2580773 /usr/lib/libogg.so.0.5.2
00956000-00958000 r-xp 00000000 03:05 2575992 /usr/lib/libkrb5support.so.0.0
00958000-00959000 rwxp 00001000 03:05 2575992 /usr/lib/libkrb5support.so.0.0
0095b000-009ca000 r-xp 00000000 03:05 2576021 /usr/lib/libkrb5.so.3.2
009ca000-009cd000 rwxp 0006e000 03:05 2576021 /usr/lib/libkrb5.so.3.2
009cf000-009f2000 r-xp 00000000 03:05 2575993 /usr/lib/libk5crypto.so.3.0
009f2000-009f3000 rwxp 00023000 03:05 2575993 /usr/lib/libk5crypto.so.3.0
009f5000-009fa000 r-xp 00000000 03:05 1432081 /lib/libcrypt-2.3.5.so
009fa000-009fb000 r-xp 00004000 03:05 1432081 /lib/libcrypt-2.3.5.so
009fb000-009fc000 rwxp 00005000 03:05 1432081 /lib/libcrypt-2.3.5.so
009fc000-00a23000 rwxp 009fc000 00:00 0
00a25000-00a3c000 r-xp 00000000 03:05 2576034 /usr/lib/libgssapi_krb5.so.2.2
00a3c000-00a3d000 rwxp 00017000 03:05 2576034 /usr/lib/libgssapi_krb5.so.2.2
00a5c000-00a76000 r-xp 00000000 03:05 1432072 /lib/ld-2.3.5.so
00a76000-00a77000 r-xp 00019000 03:05 1432072 /lib/ld-2.3.5.so
00a77000-00a78000 rwxp 0001a000 03:05 1432072 /lib/ld-2.3.5.so
00a7a000-00b9d000 r-xp 00000000 03:05 1432077 /lib/libc-2.3.5.so
00b9d000-00b9f000 r-xp 00123000 03:05 1432077 /lib/libc-2.3.5.so
00b9f000-00ba1000 rwxp 00125000 03:05 1432077 /lib/libc-2.3.5.so
00ba1000-00ba3000 rwxp 00ba1000 00:00 0
00ba5000-00ba7000 r-xp 00000000 03:05 1432080 /lib/libdl-2.3.5.so
00ba7000-00ba8000 r-xp 00001000 03:05 1432080 /lib/libdl-2.3.5.so
00ba8000-00ba9000 rwxp 00002000 03:05 1432080 /lib/libdl-2.3.5.so
00bab000-00bce000 r-xp 00000000 03:05 1432089 /lib/libm-2.3.5.so
00bce000-00bcf000 r-xp 00022000 03:05 1432089 /lib/libm-2.3.5.so
00bcf000-00bd0000 rwxp 00023000 03:05 1432089 /lib/libm-2.3.5.so
00bd2000-00be4000 r-xp 00000000 03:05 2576082 /usr/lib/libz.so.1.2.2.2
00be4000-00be5000 rwxp 00011000 03:05 2576082 /usr/lib/libz.so.1.2.2.2
00bfb000-00c04000 r-xp 00000000 03:05 1432111 /lib/libgcc_s-4.0.2-20051126.so
.1
00c04000-00c05000 rwxp 00009000 03:05 1432111 /lib/libgcc_s-4.0.2-20051126.so
.1
00cdd000-00db2000 r-xp 00000000 03:05 2578397 /usr/lib/libstdc++.so.6.0.7
00db2000-00db7000 rwxp 000d5000 03:05 2578397 /usr/lib/libstdc++.so.6.0.7
00db7000-00dbc000 rwxp 00db7000 00:00 0
00dcf000-00ddc000 r-xp 00000000 03:05 2584439 /usr/lib/libgsm.so.1.0.10
00ddc000-00ddd000 rwxp 0000c000 03:05 2584439 /usr/lib/libgsm.so.1.0.10
00ddf000-00ded000 r-xp 00000000 03:05 2571471 /usr/lib/libfaac.so.0.0.0
00ded000-00df0000 rwxp 0000e000 03:05 2571471 /usr/lib/libfaac.so.0.0.0
00df2000-00dfb000 r-xp 00000000 03:05 2585517 /usr/lib/libpostproc.so.0.0.1
00dfb000-00dfc000 rwxp 00008000 03:05 2585517 /usr/lib/libpostproc.so.0.0.1
06d6d000-06e65000 r-xp 00000000 03:05 1432101 /lib/libcrypto.so.0.9.7f
06e65000-06e77000 rwxp 000f8000 03:05 1432101 /lib/libcrypto.so.0.9.7f
06e77000-06e7a000 rwxp 06e77000 00:00 0
06e7c000-06eb1000 r-xp 00000000 03:05 1432104 /lib/libssl.so.0.9.7f
06eb1000-06eb4000 rwxp 00035000 03:05 1432104 /lib/libssl.so.0.9.7f
06f86000-06f9f000 r-xp 00000000 03:05 2584382 /usr/lib/libvorbis.so.0.3.0
06f9f000-06fae000 rwxp 00019000 03:05 2584382 /usr/lib/libvorbis.so.0.3.0
074ec000-074f7000 r-xp 00000000 03:05 2584388 /usr/lib/libvorbisenc.so.2.0.0
074f7000-075e8000 rwxp 0000a000 03:05 2584388 /usr/lib/libvorbisenc.so.2.0.0

Post by **zoneminder** » Fri Jan 20, 2006 9:27 am

Can you post the settings for your monitor?

Also can you try the following

Code: Select all

1) Stop ZM
2) Run zmc in a debugger so do
  a) type 'gdb zmc'
  b) type 'run -d /dev/video0'
  c) <wait for crash>
  d) type 'bt' for backtrace and post results
  e) type 'quit' to exit

Cylindric · Post by **Cylindric** » Fri Jan 20, 2006 9:33 am

Ahh, didn't think about the monitor settings, good point. I'm at work atm, so I'll have a look when I get home later.

Thanks

Lothar · Post by **Lothar** » Sat Jan 21, 2006 4:46 am

I have the same error as Cylindric. Here are my results:

#0 0x001327a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2
#1 0x005d67d5 in raise () from /lib/tls/libc.so.6
#2 0x005d8149 in abort () from /lib/tls/libc.so.6
#3 0x0060a40a in __libc_message () from /lib/tls/libc.so.6
#4 0x0061151c in _int_malloc () from /lib/tls/libc.so.6
#5 0x00612f81 in malloc () from /lib/tls/libc.so.6
#6 0x0031d447 in operator new () from /usr/lib/libstdc++.so.6
#7 0x0031d559 in operator new[] () from /usr/lib/libstdc++.so.6
#8 0x0804d702 in Polygon (this=0xbfedf210, p_n_coords=2, p_coords=0xedbb550)
at zm_poly.cpp:55
#9 0x08055f01 in Zone::ParsePolygonString (poly_string=0xedddb46 "0,0 0,0",
polygon=@0xbfedf300) at zm_zone.cpp:768
#10 0x08056547 in Zone::Load (monitor=0xedba0e8, zones=@0xbfedf3ec)
at zm_zone.cpp:873
#11 0x0805fd3d in Monitor::LoadLocalMonitors (device=0xbff6fbdb "/dev/video0",
monitors=@0xbfedf498, purpose=CAPTURE) at zm_monitor.cpp:1253
#12 0x0804b269 in main (argc=3, argv=0xbfedf714) at zmc.cpp:161

I'm using a Creative Instant webcam on Fedora Core 3. Is this a bug with Zoneminder?

Cylindric · Post by **Cylindric** » Sat Jan 21, 2006 12:15 pm

The system spec is:
Dell Inspiron 9100 laptop
OS is Fedora Core 4
Camera: Philips PCVC740 (picture verified through VLC)

My monitor settings are:

General wrote:Name: Tittycam
Source Type: Local
Function: Monitor
Enabled: yes
Maximum FPS: 0.00
Reference Image Blend %ge: 7
Triggers: none

Source wrote:Device path: /dev/video0
Device channel: 0
Device format: 0
Capture Palette: YUV420P
Width: 320
Height: 240
Orientation: normal

Timestamp wrote:Timestamp: %%s - %y/%m/%d %H:%M:%S
X: 0
Y: 0

Buffers wrote:Image buffer size: 10
warmup frames: 15
pre-buffer: 10
post-buffer: 10
alarm frame count: 1

Misc wrote:Event prefix: Event-
Sesction length: 600
Frame skip: 0
FPS report interval: 1000
Default rate: real
Default scale: actual
Web colour: red

Post by **zoneminder** » Sat Jan 21, 2006 12:15 pm

Ah, now this is interesting, especially this line

#8 0x0804d702 in Polygon (this=0xbfedf210, p_n_coords=2, p_coords=0xedbb550)
at zm_poly.cpp:55

which if gdb is correct (and that's not a given) is saying that you have a two point polygon for a zone. A two point polygon is basically a line, except that both points are at 0,0 so it's a dot! It should not be possible to create a two point polygon so I don't know if something got screwed up in the upgrade.

Can you tell me if this is an upgrade or a new install. And also may dump the contents of the Zones table (mysqldump zm Zones).

Post by **zoneminder** » Sat Jan 21, 2006 12:38 pm

Cylindric wrote:My monitor settings are:

Name: Tittycam

I can't imagine what this might be pointing at

By the way, you can easily dump this information with 'zmu -q -v -m <id>' which will also dump your zones as well. If you have bad polygons as Lothar doies, this may well barf but that will be a data point anyway. If you can post your zone settings from the database anyway it would be useful.

Post by **cordel** » Sat Jan 21, 2006 9:36 pm

HI Phil,
This is the same problem I had reported. and on a fresh install the first cam did only have two points in it's zone. It comes up with two points on any new camera added to the system that does not have [Capture Width] and [Capture Height] set when created.
I over looked that I had created the remote camera with out adding any setting initially. I have now been able to duplicate the problem.

Corey

Post by **zoneminder** » Sat Jan 21, 2006 10:07 pm

Ah, ok. I will add some validation to the monitor creation form (which I was going to do anyway to stop people including http:// in the host name) to stop this.

Cylindric · Post by **Cylindric** » Sat Jan 21, 2006 10:44 pm

'zmu -q -v -m 1' causes the above dump every time.

The Monitors table looks like this:

id: 1
name: tittycam
type: local
function: monitor
enabled: 1
triggers: <<blank>>
device: /dev/video0
channel: 0
format: 0
host: <<blank>>
port: 80
path: <<blank>>
width: 320
height: 240
palette: 15
orientation: 0
brightness: -1
contrast: -1
hue: -1
colour: -1
eventprefix: event-
format: %%s - %y/%m/%d %H:%M:%S
labelx: 0
labely: 0
imagebuffercount: 10
warmupcount: 15
preventcount: 10
posteventcount: 10
alarmframecount: 1
sectionlength: 600
frameskip: 0
maxfps: 0.00
fpsreportinterval: 1000
refblendperc: 7
controllable: 0
controllid: 0
controldevice: <<blank>>
controladdress: <<blank>>
autostoptimeout: <<blank>>
trackmotion: 0
trackdelay: 0
returnlocation: -1
returndelay: 0
defaultrate: 100
defaultscale: 100
webcolour: red
sequence: 1

and the zones:

id: 1:
monitorid: 1
name: All
type: Active
units: Percent
numcoords: 4
coords: 0,0 320,0 320,240 0,240
area: 76800
lox: 0
loy: 0
hix: 0
hiy: 0
alarmrgb: 16711680
checkmethod: blobs
minpixelthreshold: 25
maxpixelthreshold: <<blank>>
minalarmpixels: 1
maxalarmpixels: 19
filterx: 3
filtery: 3
minfilterpixels: 1
maxfilterpixels: 19
minblobpixels: 1
maxblobpixels: <<blank>>
minblobs: 1
maxblobs: <<blank>>

Cylindric · Post by **Cylindric** » Sat Jan 21, 2006 10:52 pm

zoneminder wrote:I can't imagine what this might be pointing at

I was just hoping it would be an incentive for people to help me fix my problem

I've just noticed that now I've created a new camera, I can run the aforementioned zmu command without failure, but I'm still not getting any luck. The webinterface still says "stopped" no matter how often or how I start zm.

zmu -q -v -m 1 wrote:[root@hercules ~]# zmu -q -v -m 1
Monitor 1(TittyCam)
Id : 1
Name : TittyCam
Type : Local
Device : /dev/video0
Channel : 0
Format : 0
Width : 320
Height : 240
Palette : 15
Colours : 3
Event Prefix : Event-
Label Format : %%s - %y/%m/%d %H:%M:%S
Label Coord : 0,0
Image Buffer Count : 10
Warmup Count : 15
Pre Event Count : 10
Post Event Count : 10
Alarm Frame Count : 1
Section Length : 600
Maximum FPS : 0.00
Reference Blend %ge : 7
Track Motion : 0
Function: 2 - Monitor
Zones : 1
Id : 3
Label : New
Type: 1 - Active
Alarm RGB : ff0000
Check Method: 1 - Alarmed Pixels
Min Pixel Threshold : 25
Max Pixel Threshold : 0
Min Alarm Pixels : 15360
Max Alarm Pixels : 0
Filter Box : 0,0
Min Filter Pixels : 0
Max Filter Pixels : 0
Min Blob Pixels : 0
Max Blob Pixels : 0
Min Blobs : 0
Max Blobs : 0

Nothing too obvious to me in /var/log/messages either

/var/log/messages wrote:Jan 21 22:41:04 hercules zmdc[5452]: INF ['zmwatch.pl' started at 06/01/21 22:41:04]
Jan 21 22:41:04 hercules zmdc[5409]: INF ['zmwatch.pl' starting at 06/01/21 22:41:04, pid = 5452]
Jan 21 22:41:04 hercules su(pam_unix)[5448]: session closed for user apache
Jan 21 22:41:04 hercules su(pam_unix)[5454]: session opened for user apache by (uid=0)
Jan 21 22:41:04 hercules zmwatch[5452]: INF [Watchdog starting]
Jan 21 22:41:04 hercules zmwatch[5452]: INF [Watchdog pausing for 30 seconds]
Jan 21 22:41:04 hercules zmdc[5458]: INF ['zmupdate.pl -c' started at 06/01/21 22:41:04]
Jan 21 22:41:04 hercules zmdc[5409]: INF ['zmupdate.pl -c' starting at 06/01/21 22:41:04, pid = 5458]
Jan 21 22:41:04 hercules su(pam_unix)[5454]: session closed for user apache
Jan 21 22:41:05 hercules Update agent starting at 06/01/21 22:41:05
Jan 21 22:41:14 hercules zmu[5470]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.05470]
Jan 21 22:41:28 hercules zmu[5486]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.05486]
Jan 21 22:41:54 hercules zmu[5518]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.05518]
Jan 21 22:43:17 hercules zmc_dvideo0[5433]: INF [TittyCam: 1000 - Capturing at 7.46 fps]
Jan 21 22:45:30 hercules zmc_dvideo0[5433]: INF [TittyCam: 2000 - Capturing at 7.52 fps]
Jan 21 22:46:54 hercules zmu[5816]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.05816]
Jan 21 22:46:56 hercules zmu[5818]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.05818]
Jan 21 22:46:58 hercules zmu[5820]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.05820]
Jan 21 22:47:43 hercules zmc_dvideo0[5433]: INF [New: 1000 - Capturing at 2.50 fps]
Jan 21 22:47:44 hercules zmc_dvideo0[5433]: INF [TittyCam: 3000 - Capturing at 7.46 fps]
Jan 21 22:49:57 hercules zmc_dvideo0[5433]: INF [TittyCam: 4000 - Capturing at 7.52 fps]
Jan 21 22:52:11 hercules zmc_dvideo0[5433]: INF [TittyCam: 5000 - Capturing at 7.46 fps]

I can't delete cameras either, I tick the box and click delete, and aptove the confirmation, but nothing actually gets deleted.
I get the feeling this is going to turn out to be something daft I've done wrong

Cylindric · Post by **Cylindric** » Sun Jan 22, 2006 5:51 pm

Bah, I can't get MySQL to log the queries either, so I can't really see any more info

Hmm, I'm going to remove and put in 1.20 and see what happens.

This is the full log from a "zmpkl.pl start" through to a "zmpkl.pl stop". The section in green will repeat it self indefinately until stopped.

The debug log is huge, so that's here: http://pastebin.com/517640

/var/log/messages wrote:Jan 22 16:48:40 hercules zmpkg[15418]: INF [Command: start]
Jan 22 16:48:40 hercules su(pam_unix)[15421]: session opened for user apache by (uid=0)
Jan 22 16:48:40 hercules su(pam_unix)[15421]: session closed for user apache
Jan 22 16:48:40 hercules su(pam_unix)[15423]: session opened for user apache by (uid=0)
Jan 22 16:48:40 hercules su(pam_unix)[15423]: session closed for user apache
Jan 22 16:48:40 hercules su(pam_unix)[15425]: session opened for user apache by (uid=0)
Jan 22 16:48:40 hercules su(pam_unix)[15425]: session closed for user apache
Jan 22 16:48:40 hercules su(pam_unix)[15431]: session opened for user apache by (uid=0)
Jan 22 16:48:40 hercules zmfix[15432]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.15432]
Jan 22 16:48:40 hercules su(pam_unix)[15431]: session closed for user apache
Jan 22 16:48:40 hercules su(pam_unix)[15434]: session opened for user apache by (uid=0)
Jan 22 16:48:40 hercules zmdc[15437]: INF [Server starting at 06/01/22 16:48:40]
Jan 22 16:48:43 hercules su(pam_unix)[15434]: session closed for user apache
Jan 22 16:48:43 hercules su(pam_unix)[15461]: session opened for user apache by (uid=0)
Jan 22 16:48:44 hercules zmdc[15464]: INF ['zmc -d /dev/video0' started at 06/01/22 16:48:44]
Jan 22 16:48:44 hercules zmdc[15437]: INF ['zmc -d /dev/video0' starting at 06/01/22 16:48:44, pid = 15464]
Jan 22 16:48:44 hercules su(pam_unix)[15461]: session closed for user apache
Jan 22 16:48:44 hercules su(pam_unix)[15465]: session opened for user apache by (uid=0)
Jan 22 16:48:44 hercules zmc_dvideo0[15464]: INF [Debug Level = 0, Debug Log = <none>]
Jan 22 16:48:44 hercules zmc_dvideo0[15464]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.15464]
Jan 22 16:48:44 hercules zmdc[15469]: INF ['zmfilter.pl' started at 06/01/22 16:48:44]
Jan 22 16:48:44 hercules zmdc[15437]: INF ['zmfilter.pl' starting at 06/01/22 16:48:44, pid = 15469]
Jan 22 16:48:44 hercules su(pam_unix)[15465]: session closed for user apache
Jan 22 16:48:44 hercules su(pam_unix)[15470]: session opened for user apache by (uid=0)
Jan 22 16:48:44 hercules zmdc[15437]: INF ['zmc -d /dev/video0' died, signal 6]
Jan 22 16:48:44 hercules zmdc[15437]: INF [Starting pending process, zmc -d /dev/video0]
Jan 22 16:48:44 hercules zmdc[15474]: INF ['zmc -d /dev/video0' started at 06/01/22 16:48:44]
Jan 22 16:48:44 hercules zmdc[15437]: INF ['zmc -d /dev/video0' starting at 06/01/22 16:48:44, pid = 15474]
Jan 22 16:48:44 hercules zmdc[15475]: INF ['zmaudit.pl -c' started at 06/01/22 16:48:44]
Jan 22 16:48:44 hercules zmdc[15437]: INF ['zmaudit.pl -c' starting at 06/01/22 16:48:44, pid = 15475]
Jan 22 16:48:44 hercules su(pam_unix)[15470]: session closed for user apache
Jan 22 16:48:44 hercules su(pam_unix)[15476]: session opened for user apache by (uid=0)
Jan 22 16:48:44 hercules zmfilter[15469]: INF [Scanning for events]
Jan 22 16:48:44 hercules zmc_dvideo0[15474]: INF [Debug Level = 0, Debug Log = <none>]
Jan 22 16:48:44 hercules zmc_dvideo0[15474]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.15474]
Jan 22 16:48:45 hercules zmdc[15483]: INF ['zmwatch.pl' started at 06/01/22 16:48:45]
Jan 22 16:48:45 hercules zmdc[15437]: INF ['zmwatch.pl' starting at 06/01/22 16:48:45, pid = 15483]
Jan 22 16:48:45 hercules su(pam_unix)[15476]: session closed for user apache
Jan 22 16:48:45 hercules su(pam_unix)[15484]: session opened for user apache by (uid=0)
Jan 22 16:48:45 hercules zmdc[15437]: INF ['zmc -d /dev/video0' died, signal 6]
Jan 22 16:48:45 hercules zmwatch[15483]: INF [Watchdog starting]
Jan 22 16:48:45 hercules zmwatch[15483]: INF [Watchdog pausing for 30 seconds]
Jan 22 16:48:45 hercules zmdc[15488]: INF ['zmupdate.pl -c' started at 06/01/22 16:48:45]
Jan 22 16:48:45 hercules zmdc[15437]: INF ['zmupdate.pl -c' starting at 06/01/22 16:48:45, pid = 15488]
Jan 22 16:48:45 hercules su(pam_unix)[15484]: session closed for user apache
Jan 22 16:48:45 hercules Update agent starting at 06/01/22 16:48:45
Jan 22 16:48:50 hercules zmdc[15437]: INF [Starting pending process, zmc -d /dev/video0]
Jan 22 16:48:50 hercules zmdc[15491]: INF ['zmc -d /dev/video0' started at 06/01/22 16:48:50]
Jan 22 16:48:50 hercules zmdc[15437]: INF ['zmc -d /dev/video0' starting at 06/01/22 16:48:50, pid = 15491]
Jan 22 16:48:50 hercules zmc_dvideo0[15491]: INF [Debug Level = 0, Debug Log = <none>]
Jan 22 16:48:50 hercules zmc_dvideo0[15491]: INF [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.15491]
Jan 22 16:48:50 hercules zmdc[15437]: INF ['zmc -d /dev/video0' died, signal 6]
Jan 22 16:50:18 hercules zmpkg[15514]: INF [Command: stop]
Jan 22 16:50:18 hercules su(pam_unix)[15517]: session opened for user apache by (uid=0)
Jan 22 16:50:18 hercules su(pam_unix)[15517]: session closed for user apache
Jan 22 16:50:18 hercules su(pam_unix)[15519]: session opened for user apache by (uid=0)
Jan 22 16:50:18 hercules su(pam_unix)[15519]: session closed for user apache
Jan 22 16:50:18 hercules su(pam_unix)[15521]: session opened for user apache by (uid=0)
Jan 22 16:50:18 hercules su(pam_unix)[15521]: session closed for user apache
Jan 22 16:50:18 hercules su(pam_unix)[15524]: session opened for user apache by (uid=0)
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmwatch.pl ' stopping at 06/01/22 16:50:18]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmwatch.pl ' died, signal 14]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmfilter.pl ' stopping at 06/01/22 16:50:18]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmfilter.pl ' died, signal 14]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmupdate.pl -c' stopping at 06/01/22 16:50:18]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmupdate.pl -c' died, signal 14]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmaudit.pl -c' stopping at 06/01/22 16:50:18]
Jan 22 16:50:18 hercules zmdc[15437]: INF ['zmaudit.pl -c' died, signal 14]
Jan 22 16:50:28 hercules zmdc[15437]: INF [Server shutdown at 06/01/22 16:50:28]
Jan 22 16:50:28 hercules su(pam_unix)[15524]: session closed for user apache

Post by **zoneminder** » Sun Jan 22, 2006 8:02 pm

Do you know if you have a weird zone for this monitor?

Can you do a 'select * from Zones where MonitorId = <your mon id>' in mysql and show the results?

Cylindric · Post by **Cylindric** » Sun Jan 22, 2006 8:33 pm

Should be a fairly dull zone. I did go in and edited the zone, and moved the corners in a bit, because the debug log seemed to indicate some odd issue with the sizes. What I'm not sure of is why I can't delete monitors. I'm having trouble turning on mysql logging in Fedora, so I can't see what's going on really.

create wrote:CREATE TABLE `Zones` (
`Id` int(10) unsigned NOT NULL auto_increment,
`MonitorId` int(10) unsigned NOT NULL default '0',
`Name` varchar(64) NOT NULL default '',
`Type` enum('Active','Inclusive','Exclusive','Preclusive','Inactive') NOT NULL default 'Active',
`Units` enum('Pixels','Percent') NOT NULL default 'Pixels',
`NumCoords` tinyint(3) unsigned NOT NULL default '0',
`Coords` tinytext NOT NULL,
`Area` int(10) unsigned NOT NULL default '0',
`LoX` smallint(5) unsigned NOT NULL default '0',
`LoY` smallint(5) unsigned NOT NULL default '0',
`HiX` smallint(5) unsigned NOT NULL default '0',
`HiY` smallint(5) unsigned NOT NULL default '0',
`AlarmRGB` int(10) unsigned default '0',
`CheckMethod` enum('AlarmedPixels','FilteredPixels','Blobs') NOT NULL default 'Blobs',
`MinPixelThreshold` smallint(5) unsigned default NULL,
`MaxPixelThreshold` smallint(5) unsigned default NULL,
`MinAlarmPixels` int(10) unsigned default NULL,
`MaxAlarmPixels` int(10) unsigned default NULL,
`FilterX` tinyint(3) unsigned default NULL,
`FilterY` tinyint(3) unsigned default NULL,
`MinFilterPixels` int(10) unsigned default NULL,
`MaxFilterPixels` int(10) unsigned default NULL,
`MinBlobPixels` int(10) unsigned default NULL,
`MaxBlobPixels` int(10) unsigned default NULL,
`MinBlobs` smallint(5) unsigned default NULL,
`MaxBlobs` smallint(5) unsigned default NULL,
PRIMARY KEY (`Id`),
UNIQUE KEY `UC_Id` (`Id`),
KEY `MonitorId` (`MonitorId`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1;

insert wrote:4,
1,
'New',
'Active',
'Percent',
4,
'10,10 306,12 309,228 9,228',
65035,
0,
0,
0,
0,
16711680,
'AlarmedPixels',
25,
NULL,
13007,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL

Post by **zoneminder** » Sun Jan 22, 2006 9:14 pm

The only odd thing I can see here is that your zone seems to have most of it's counts set to NULL (or zero effectively).

I've done a bit of tidying up in the last few days fixing places where NULL fields in the db are reflected as null pointers (which I don't think they used to be). I would be interested to see whether it makes any difference if you set the NULL fields to 0.

I think that being unable to delete monitors is a problem with zm_actions.php, which I've also revamped a bit in the last few days, so hopefully that will fix that as well.