Cambozola and zms

Support and queries relating to all previous versions of ZoneMinder
Locked
gardo
Posts: 12
Joined: Mon Jul 14, 2003 2:11 pm

Cambozola and zms

Post by gardo »

For some reason, Cambozola loads, but never displays anything. Right clicking brings up some status information. 0 FPS, and the correct address. I am running RH8, is there anything special I need todo to get zms to stream properly. Or, is there an easy way to turn on debug information, so I know zms is streaming, but Cambozola is choking?

Ryan
User avatar
zoneminder
Site Admin
Posts: 5215
Joined: Wed Jul 09, 2003 2:07 pm
Location: Bristol, UK
Contact:

Re: Cambozola and zms

Post by zoneminder »

Hi Ryan,

Do you know which version of Cambozola you are using? If you have a recet version I would recommend trying it with 0.22, which is available from the zoneminder.com in the downloads area. I've found this one to be the most reliable.

You can also check in /var/log/messages for any obvious errors or run zms from the command check it is outputting correctly. Also you might want to try using Netscape or Mozilla to try the streaming without Cambozola and of course make sure that your cgi setup is correct in your web server.

Phil,
gardo
Posts: 12
Joined: Mon Jul 14, 2003 2:11 pm

Re: Cambozola and zms

Post by gardo »

I am using 0.22 downloaded from your site. I don't see any reference to it in my /var/log/httpd/access_log or /var/log/httpd/error_log. I don't think after it loads it is contacting my server. However, the IP address looks correct in the URL: string for cambozola. Also, I see zms running under 'top' when I don't have a streaming window open. I'm not sure what is going on here.

Ryan
gardo
Posts: 12
Joined: Mon Jul 14, 2003 2:11 pm

Re: Cambozola and zms

Post by gardo »

0.22 will never start the stream. However, when I upgrade to 0.34 it streams, but the images are all corrupt. When I go back to 0.22, the stream will not start.

Ryan
User avatar
zoneminder
Site Admin
Posts: 5215
Joined: Wed Jul 09, 2003 2:07 pm
Location: Bristol, UK
Contact:

Re: Cambozola and zms

Post by zoneminder »

Hi Ryan,

I've not heard of any previous issues with v.22 of Cambozola, which browser are you trying it from? Do you get anything displayed at all?

Phil,
igord
Posts: 5
Joined: Tue Jul 22, 2003 11:38 am

Re: Cambozola and zms

Post by igord »

Same with me. WinXP IE6 0.22 - nothing, latest - corrupt images
eservaas
Posts: 3
Joined: Wed Jul 23, 2003 9:47 am

Re: Cambozola and zms

Post by eservaas »

Try an other browser (IE6 doens not work with it but using galeon it works fine.
Does anybody has a suggestion getting it to work onder IE6 ?

Ed
eservaas
Posts: 3
Joined: Wed Jul 23, 2003 9:47 am

Re: Cambozola and zms

Post by eservaas »

YESS!!! It works now, the problem was mod_auth witch I have compiled with Apache, after changing the policy is works GREAT!
Good job!
Locked