Router
-
wiggsdannyboy
- Posts: 10
- Joined: Fri Mar 03, 2006 5:51 pm
Router
How might I configure a router so my Zoneminder machine can be behind it?
-
jameswilson
- Posts: 5111
- Joined: Wed Jun 08, 2005 8:07 pm
- Location: Midlands UK
assuming your using NAT, you will need to setup port forwarding mate
James Wilson
Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
-
wiggsdannyboy
- Posts: 10
- Joined: Fri Mar 03, 2006 5:51 pm
Two Wire
The router built into my 2Wire DSL modem uses a little different terminology. It wants me to select the machine name of the, in this case, web server. The 2Wire thinks all the Linux machines on the network are called <unknown>. The Windows machines all have names.
So once I guessed the right unknown machine it works.
I will have to change to static IP addressing. I think I can do that.
Where do I change the "name" of the Linux machines? Is that the NETBIOS name?
So once I guessed the right unknown machine it works.
I will have to change to static IP addressing. I think I can do that.
Where do I change the "name" of the Linux machines? Is that the NETBIOS name?