Would like sharper moving images on Axis 207

vahan1 · Post by **vahan1** » Fri May 19, 2006 6:18 pm

So everything is setup and looks good. When there isn't too much motion, objects appear clear/sharp. While moving, they're not very sharp - sample below. Any way to tweak the config to improve this?

Current Config:

Axis 207 wired, using jpg stream @ 640x480, not limited frame rate, modect.

Any suggestions would be greatly appreciated!

Thanks you

jameswilson · Post by **jameswilson** » Fri May 19, 2006 6:41 pm

you can set it to image quailty or framerqate (well you could on a 206) if you select none or image quailty it will slow the shutter down and give loverly images without movement or select framrate and it will help, but you cant beat more light!!

Post by **zoneminder** » Fri May 19, 2006 9:49 pm

Yes, this definately has the look of long exposure time about it!

vahan1 · Post by **vahan1** » Fri May 19, 2006 10:41 pm

Thanks for the info guys!

Just changed it, will watch how it goes tonight

thanks again

-v

Mark Ward · Post by **Mark Ward** » Sun May 21, 2006 11:43 am

Please post your results, I'm very interested in what quality can be achieved while maintaining sensible settings.

Mark.

vahan1 · Post by **vahan1** » Tue May 23, 2006 5:43 pm

So selecting framerate definitely made considerable difference. It drops down the quality - the picture has higher noise level - but higher framerate. I would compare the change to taking pictures on a camera at 100 ISO vs 800 or higher ISO.

I can defenitely distinguish the faces now. Here's a sample after a change, keep in mind, i'm moving pretty fast in this one. I'd definitely recommend changing these to the "framerate" setting.

vahan1 · Post by **vahan1** » Tue May 23, 2006 6:00 pm

another sample, sorry no face. the person here is moving at a reasonable speed to open the door.

Post by **zoneminder** » Wed May 24, 2006 4:08 pm

Thanks for posting your results.