gadspot NC1000

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
jameswilson
Posts: 5111
Joined: Wed Jun 08, 2005 8:07 pm
Location: Midlands UK

Post by jameswilson »

If you put an ir cut filter over the lens this will remove the hue but afect low light performace. Proper day night cams move the filter automatically
James Wilson

Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
RobOnline
Posts: 7
Joined: Wed Jun 21, 2006 7:02 pm
Location: Somerset, UK

Post by RobOnline »

jameswilson wrote:If you put an ir cut filter over the lens this will remove the hue but afect low light performace. Proper day night cams move the filter automatically
How much do these filters cost and is there a link to anywhere that sells them?
Rob.
jameswilson
Posts: 5111
Joined: Wed Jun 08, 2005 8:07 pm
Location: Midlands UK

Post by jameswilson »

well it dpeends on your lens but they are a bit specilist. I know of trade places to get them from but not of any end user places. You could try your local photography shop/ etailer etc
James Wilson

Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
RobOnline
Posts: 7
Joined: Wed Jun 21, 2006 7:02 pm
Location: Somerset, UK

Post by RobOnline »

On the Java applet the time goes way out.
It's set to an NTP server but it still looses time by 10 minutes and I have to manually set the NTP Server again.
Any suggestions on getting the time to stay correct?
Rob.
Post Reply