Orite ic301

leprox · Post by **leprox** » Fri Aug 04, 2006 4:57 pm

This is all information i have..

I need to use with Zm , i have 4 cameras..

Built-in Micphone with Audio / Video Function
Real-Time Motion Detection
Support TCP/IP, SMTP, FTP, PPPoE , DCHP (Dynamic Host Configuration Prtocol)
Built-in web server allows camera to be accessed by standard Internet browser
Network RJ45: 10Base-T/100Base-TX Ethernet networks
Network ready, IP addressable (no PC is required.)
Motion-JPEG based compression
4 different resolutions: 640x480, 352x288 Record AVI or Motion JPEG images on to hard disk for future viewing

Technical Specifications

Audio
Audio:

Dimensions
Length: 91mm
Width: 65mm
Height: 53mm
Weight: 163g

Dynamic DNS
Dynamic DNS:
Supported Companies: DynDNS.org, TZO.com, DHS.org,

EMI & Safety
Certifications: CE FCC

Event Operations
Motion Detection:
FTP Snapshots:
Email Snapshots:

Lens
Auto Iris:
Changeable Lens:
Lens Type: 4mm~6mm

Operating Environments
Temperature: -10~50
Humidity: 10
Indoor or Outdoor: Indoor

Ports and Connectors
WAN:
LAN:
Auto Iris Lens Connector:
Network Type: 10Base T / 100Base TX
Other Connectors: power,

Power
Output: DC5.1/2A
Input: 110V

Protocols
Protocols: TCP/IP, HTTP, SMTP, FTP, Telnet, DNS, DDNS, UPnP, DHCP,

Security
Number of Simultanious Logged-in Users: 99

Software Included
Drivers:
Recording Software:

System
Built-in WebServer:
Platform: linux
CPU: arm7
RAM: 8mb
ROM: 4mb

System Requirements
Operating System: Windows 98, Windows 98 SE, Windows ME, Windows 2000, Windows XP, Linux,
Compatible Browsers: MS Internet Explorer,
Viewing Protocols: JAVA, ActiveX,

Video
Video Compression: Mjpeg
Max Video Resolution: 640*480
Light Sensitivity: 5 lux
Frames Per Second: 20 fps
Video Source: AVI format
Image Sensor: 1/4
Automatic Gain Control (AGC):
Automatic White Balancing (AWB):

jameswilson · Post by **jameswilson** » Fri Aug 04, 2006 5:08 pm

if you get no luck and there is one available online let me know the details and i will see if i can find out the relevant info for you

leprox · Post by **leprox** » Fri Aug 04, 2006 9:31 pm

ok then
monitor settings

remote host name
user:pass@host
Thanks to Jameswilson

remote host port
89

Remote host path
/Jpeg/CamImg.jpg

24 bit colour

res 352x288

These should get you started. Its using the jp[eg snapshot mode of the cam and there might be a mjpeg path to get more fps. You should alse be able to up the res and this will be in settings somewhere of the cam i guess.

leprox · Post by **leprox** » Sat Aug 05, 2006 12:17 am

I have this problem with the cam...... >

I the web the cam works fine..

Here is the screenshoot

jameswilson · Post by **jameswilson** » Sat Aug 05, 2006 12:39 am

what have you altered? Did it work then stop, have you tried recycling the power on the cam, you may be trying to run at to high frame rate.
Also try regexp in the network settings

leprox · Post by **leprox** » Sat Aug 05, 2006 5:07 am

No..the camera never works..i have 4 cameras...and all looks like the screenshot...is similar like a computer monitor with another frecuency , i change the three frecuency modes in the camera Outdoor , indoor50 , and indoor60 , without results
And the option ZM_NETCAM_REGEXPS is "on"

When i enter to the camera without zm , in the camera web , it works fine,..

jameswilson · Post by **jameswilson** » Sat Aug 05, 2006 9:59 am

Well i had it working in my zm when i raised the config settings

I have just reenabled the monitor at my end and i get a mainly blacdk image. I assume its v dark. But my zm server works fine with the above settings

leprox · Post by **leprox** » Sat Aug 05, 2006 10:57 pm

ok , i can see the cameras now...
The resoution is 320x240 not 352x288

Thanks!