Airlink AIC-250 IP Cameras

pete · Post by **pete** » Wed Aug 30, 2006 12:49 am

Does anyone know if these cameras work with zomeminder? I can bring up images from the camera in the browser but I'm not getting any images in zoneminder.

Here is what I have for my remote host path:

admin:admin@192.168.1.111/IMAGE.JPG

Do I need the user id in the remote host name too? Any other things I should check? Thanks.

jameswilson · Post by **jameswilson** » Wed Aug 30, 2006 7:19 am

your path should just have the /IMAGE.jpg

collinm · Post by **collinm** » Thu Aug 31, 2006 1:17 am

this camera interest me alot...

if you could say, if you are able to get motion picture... that could help me

rwalker · Post by **rwalker** » Tue Sep 05, 2006 4:16 pm

http://www.zoneminder.com/wiki/index.ph ... rk_Cameras

we4zonM · Post by **we4zonM** » Fri May 30, 2008 7:31 am

http://www.zoneminder.com/wiki/index.ph ... rk_Cameras

Airlink 101 AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200

Zoneminder v1.22.3
I have this camera too and I just installed Zoneminder and read this post. Did anyone get this camera to work? The Wiki instructions did not get it to work! Note that there is no "PCRE" settings selection in Options -> Network. For the Camera configuration in Zoneminder, I tried "remote", "host = <ip>", "path=/video.cgi". The camera is working and displays jpg images with http://<ip>/image.jpg.

Does Zoneminder have an option to use the jpg images that the camera produces>? If so, what are all of the settings to use?

we4zonM · Post by **we4zonM** » Tue Jul 08, 2008 9:09 pm

If you take a look at the Wiki, I updated the Airlink101 AIC250 link with the settings that gave 2 FPS for a JPG image stream.

ZoneMinder Forums

Airlink AIC-250 IP Cameras

Airlink AIC-250 IP Cameras

The wiki is your friend!