GrandTec WiFi Camera

[joky]

Hi everybody,

i've bought a grad wifi-cam for a quick and dirty installation. The cam looks quite good, i get fine pictures at low price.

But unfortunately i can't integrate the jpeg-pictures (hosted on http://192.168.0.61/still.jpg with http-auth) into ZM.

Any ideas?

Here's the link to the manuf:
http://www.grand.com.tw/en/product_form ... lwk_page=1


Best Regards,
Erwin

[jameswilson]

i dont know the cam but you usually just do
http://user:password@<ip>/stll.etc.etc.jpg

[joky]

thank you!!

i got it, the problem was that the shm-buffer size was too small (as written in http://www.zoneminder.com/index.php?id= ... faq_faq=10)

I remember, I had the same problem grabbing pictures bigger than 480x360 via bttv.

Grand IP Cameras, at least the Wifi and "III"-Models are working fine!

Remote Host Name root:admin@ip.of.the.cam
Remote Host Port 80
Remote Host Path /still.jpg

The only disadvantage is the low image quality on daylight, the dark, flashing infrared LED's. But at the price of about 80 euro it's ok.

best regards, erwin

[zoneminder]

Good news. If they aren't there already would you mind adding these to the supported hardware section of the Wiki?

[joky]

i will!
i just ordered a few more examples of these devices, i want to ensure that you can surely say - yes they're working.
i dont want a solution like "the are working on 70% of all cases"

[ksc133]

hi folks,

i 've this grandtec III camera

but seems like it can get stream images?

pls help

thanks

[ksc133]

hi folks

i can't get mjpeg to work.
while i can get jpeg to work at /still.jpg

there's a link to 192.168.1.254/video.cgi but ZM monitor shows a black screen instead?

any ideas?

thanks

[ksc133]

hi folks

the mjpeg streaming prob was due to IE..

i've installed fiefox and was ok now.

the cameras r ok...

cheers!

[ksc133]

this camera seems to be able to output only 4-5fps via ZM

i've tested to view it directly with zm and it looks much faster at 15-30fps

any ideas to make it run at 15fps or more

thanks