I have one main office and I would like to tie in 3 remote sites each with 4 cameras.
Each site only has 1 public IP address which is NATed on a linksys router. I know I can setup the system for 1 camera per site doing NAT since I have 1 IP but is there a way to connect 4 cameras per site with my current setup? We connect to every site over Cable and DSL.
Thanks
Centralized Zoneminder For Remote Sites
if i got you right, you want one zm machine at your main office, pulling images from 3 * 4 cameras.
the first thing that comes in my mind is to change the ports for each camera. so you have i.e. 80,81,82,83 for the cameras at each site. this can either be done by changing the camera ports and forward these ports an the routers, or the router translates port 81-83 to port 80 for the different internal camera ips.
cheers,
tim
the first thing that comes in my mind is to change the ports for each camera. so you have i.e. 80,81,82,83 for the cameras at each site. this can either be done by changing the camera ports and forward these ports an the routers, or the router translates port 81-83 to port 80 for the different internal camera ips.
cheers,
tim
Code: Select all
$> man woman
$> Segmentation fault (core dumped)