Help! My Debian Unstable and Axis 206 dont seem to work.

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 6:38 pm

you grabing via jpeg or mjpeg, ie whats the path your using~?

trevorj · Post by **trevorj** » Wed Oct 03, 2007 6:39 pm

/axis-cgi/mjpg/video.cgi?resolution=320x240

The resolution settings are correct, and that is the path I'm using.

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 6:41 pm

strange i had issues with jpeg grab on a 206m.

I use 206's on many sites with great success. Try using jpeg grabs and see if that helps

trevorj · Post by **trevorj** » Wed Oct 03, 2007 6:42 pm

I will as soon as the camera itself is operational again. I tried to flash the firmware and it sort of died midway through, so now I have to wait for Axis tech support to tell me how to flash the memory.

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 6:45 pm

ah

good luck lol

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 6:46 pm

just had a thought you arnt trying to throttle the fps in zm on a mjpeg feed are you, ie your throttling the cam?

trevorj · Post by **trevorj** » Wed Oct 03, 2007 7:05 pm

I have the Max FPS set to 12 via ZM, yes.

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 7:08 pm

thats your problem then

set it to 12 on the cam, or use jpg stream

trevorj · Post by **trevorj** » Wed Oct 03, 2007 7:38 pm

Ah! I will test this when my camera works again and get back to you about the results.

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 8:00 pm

ok matey

trevorj · Post by **trevorj** » Wed Oct 03, 2007 8:06 pm

Okay. It seems to be working without the frame constraint.

If I want to force users to log in to view the camera image, how do I go about passing a username/password along to Zoneminder, so it can log in?

jameswilson · Post by **jameswilson** » Wed Oct 03, 2007 8:10 pm

you mean on the cam?
if so add
user:pass@123.123.123.123

to the host once you have set a pass etc on the cam

trevorj · Post by **trevorj** » Wed Oct 03, 2007 8:11 pm

Thanks! I figured it out by myself just as you posted it.

I think it's actually working now.