VGA to BNC

xJJsilvax · Post by **xJJsilvax** » Mon Aug 11, 2008 7:39 pm

Hi,

we have 8 video Cameras That go from a 8 Bnc to 1 VGA which is plugged into a PCI slot. Will ZoneMinder work with this device?

Thanks in advance!

Lee Sharp · Post by **Lee Sharp** » Mon Aug 11, 2008 8:03 pm

I have dozens of those. Some work, and some don't. The ones with the game port work best...

Hint, you might want to tell us what card you are using.

xJJsilvax · Post by **xJJsilvax** » Mon Aug 11, 2008 8:59 pm

Hey, thanks for your quick reply

I pulled out the card and there is no model number or anything and we dont have any docs on it (of course)

It has 2 - 3 row 15 PIn female ports. and 2 Yellow RCA ports.

It came with a FOXCONN System. Any ideas?

Thanks alot!

Lee Sharp · Post by **Lee Sharp** » Wed Aug 13, 2008 8:34 pm

You have to take a picture.

xJJsilvax · Post by **xJJsilvax** » Wed Aug 13, 2008 11:58 pm

Here you go thanks again for the help!

http://vpn.trafficmanagement.com/IMG00085.JPG
http://vpn.trafficmanagement.com/IMG00087.JPG

Lee Sharp · Post by **Lee Sharp** » Fri Aug 15, 2008 11:28 pm

Dead link...

xJJsilvax · Post by **xJJsilvax** » Tue Aug 19, 2008 10:27 pm

sorry try again...

Post by **cordel** » Tue Aug 19, 2008 10:42 pm

Still dead links.

xJJsilvax · Post by **xJJsilvax** » Tue Aug 19, 2008 10:54 pm

Ok the card i have is a Conxeant Fusion 878A. I am running Ubuntu 6.06. iS this setup compatable with Zoneminder. and does anyone know of any good howto's?

Post by **cordel** » Tue Aug 19, 2008 11:32 pm

xJJsilvax wrote:Ok the card i have is a Conxeant Fusion 878A. I am running Ubuntu 6.06. iS this setup compatable with Zoneminder. and does anyone know of any good howto's?

Conxeant Fusion 878A is a chip on the board, still not a board manufacturer/model or descriptive enough to give you anything useful. And allot of boards have that chip.

You could try card=77 but there is no guarantees as I have no idea what you got.
Plenty of info about v4l:
http://linuxtv.org/v4lwiki/index.php/

Lee Sharp · Post by **Lee Sharp** » Wed Aug 20, 2008 6:39 pm

xJJsilvax wrote:Ok the card i have is a Conxeant Fusion 878A. I am running Ubuntu 6.06. iS this setup compatable with Zoneminder. and does anyone know of any good howto's?

Chip, not board, as stated... Need them pics...
http://www.google.com/search?q=free+picture+upload

Also 6.06 is old and will not support the current version. However, Hardy is still too buggy in my opinion. I and using Gutsy, and it is very stable. (This is about 40 desktops and servers, as well as ZM)