Blue Screen on Geovision GV-600

[BaD.PinG]

Sorry for my English. I have a problem. Instead of watching pictures "blue screen". I use ZoneMinder 1.23.3, the system FreeBSD 7.0 stable. Card "Geovision GV-600" chip Conexant bt878a 16 channels. I have the same thig in the "Motion". In fxtv, xawtv, kbtv2 picture perfect. I think that this issue happens on the channels. Here are some logs...

Code: Select all

bktr0@pci0:2:1:0:       class=0x040000 card=0x763c003a chip=0x036e109e rev=0x11 hdr=0x00
    vendor     = 'Conexant (Was: Brooktree Corp)'
    device     = 'Bt878/Fusion 878A Mediastream Controller'
    class      = multimedia
    subclass   = video
none1@pci0:2:1:1:       class=0x048000 card=0x763c003a chip=0x0878109e rev=0x11 hdr=0x00
    vendor     = 'Conexant (Was: Brooktree Corp)'
    device     = '7610144D&REV_02\4&1F7DBC9F&0&09F0 TV Video Capture'
    class      = multimedia

fxtv logs. Here's all right:

Code: Select all

Fxtv v1.03

DETECTED CAPTURE CARD(S) [DRIVER PROBES]:
    bktr0: <BrookTree> mem 0xf7efe000-0xf7efefff irq 22 at device 1.0 on pci2
    bktr0: [GIANT-LOCKED]
    bktr0: [ITHREAD]
    bktr0: Detected a MSP34255?-?31 at 0x80
    bktr0: Hauppauge WinCast/TV, <no> tuner, dbx stereo, msp3400c stereo.
    pci2: <multimedia> at device 1.1 (no driver attached)
    bktr0: Detected a MSP34255?-?31 at 0x80
    bktr0: Detected a MSP34255?-?31 at 0x80
    bktr0: Detected a MSP34255?-?31 at 0x80
    bktr0: Detected a MSP34255?-?31 at 0x80

Options of my kernel:

Code: Select all

options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	SHMMAXPGS=65536
options 	SHMMNI=384
options 	SHMSEG=256 
device		bktr
device  	iicbus
device  	iicbb
device  	smbus
options 	OVERRIDE_CARD=2
options 	OVERRIDE_MSP=1
options 	OVERRIDE_DBX=1
options 	BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
options 	BKTR_USE_PLL
options 	BKTR_GPIO_ACCESS
options 	BROOKTREE_ALLOC_PAGES=512

And log on the 9 level debugging:

Code: Select all

12/12/08 14:09:21.458360 zms[3473].INF-zm_debug.c/305 [New Debug Level = 9, New Debug Log = /tmp/zm_debug.log.03473]
12/12/08 14:09:21.458492 zms[3473].DB1-zms.cpp/91 [Query: mode=jpeg&monitor=1&scale=100&maxfps=10&rand=1229090960]
12/12/08 14:09:21.460323 zms[3473].DB1-zm_monitor.cpp/1967 [Got 1 monitors]
12/12/08 14:09:21.461819 zms[3473].DB1-zm_monitor.cpp/259 [monitor purpose=0]
12/12/08 14:09:21.461843 zms[3473].DB1-zm_monitor.cpp/266 [shm.size=9217188]
12/12/08 14:09:21.462172 zms[3473].DB1-zm_zone.cpp/50 [Initialised zone 0/All - 1 - 320x240 - Rgb:ff0000, CM:3, MnAT:15, MxAT:0, MnAP:50, MxAP:75000, FB:3x3, MnFP:50, MxFP:50000, MnBS:10, MxBS:0, MnB:0, MxB:0, OF: 0]
12/12/08 14:09:21.462419 zms[3473].DB9-zm_image.cpp/1343 [x1:0,y1:239 x2:0,y2:0]
12/12/08 14:09:21.462439 zms[3473].DB9-zm_image.cpp/1343 [x1:0,y1:0 x2:319,y2:0]
12/12/08 14:09:21.462456 zms[3473].DB9-zm_image.cpp/1343 [x1:319,y1:0 x2:319,y2:239]
12/12/08 14:09:21.462569 zms[3473].DB9-zm_image.cpp/1343 [x1:319,y1:239 x2:0,y2:239]
12/12/08 14:09:21.462635 zms[3473].DB9-zm_image.cpp/1363 [0: min_y: 0, max_y:239, min_x:0.00, 1/m:-0.00]
12/12/08 14:09:21.462671 zms[3473].DB9-zm_image.cpp/1363 [1: min_y: 0, max_y:239, min_x:319.00, 1/m:0.00]
12/12/08 14:09:21.462687 zms[3473].DB9-zm_image.cpp/1377 [Moving global edge]
12/12/08 14:09:21.462704 zms[3473].DB9-zm_image.cpp/1377 [Moving global edge]
12/12/08 14:09:21.462723 zms[3473].DB9-zm_image.cpp/1397 [0 - 0: min_y: 0, max_y:239, min_x:0.00, 1/m:-0.00]

[Lee Sharp]

Many have tried, but I have seen no successes with geovision cards.

[BaD.PinG]

Most importantly, not lose hope.=)