Heya folks. I installed the livecd and everything with the box is ok--on the network, can ping my Axis 205 just fine. I can even pull up firefox and browse to the IP and watch the camera just fine.
When I add it in monitor mode in ZM, and click on the camera, the window pops up with no image, and no stats are increasing. It's like the app isn't talking to it at all.
Any ideas on where I can look to troubleshoot further?
Thanks.
EDIT -- apologies -- I see the forum rules has the default path of the log files. Time to fiddle around.
Can view camera via browser as normal, but ZM can't see it
my config for 205
I am using a 205 with these settings for the monitor
Source
Remote host name user:passwd@192.168.0.161
Remote Host Port 80 (default of Axis)
Remote host path /axis-cgi/mjpg/video.cgi? or /axis-cgi/jpg/image.cgi?
Remote Image Colours 24 bit colour
Capture Width (pixles) 640
Capture Height (pixles) 480
to use 640x480 I had to increase the shared memory allocation, because I was getting Can't shmget errors in my logs
Maybe try 320x240 first
Source
Remote host name user:passwd@192.168.0.161
Remote Host Port 80 (default of Axis)
Remote host path /axis-cgi/mjpg/video.cgi? or /axis-cgi/jpg/image.cgi?
Remote Image Colours 24 bit colour
Capture Width (pixles) 640
Capture Height (pixles) 480
to use 640x480 I had to increase the shared memory allocation, because I was getting Can't shmget errors in my logs
Maybe try 320x240 first