this is the card i bought
http://www.geeks.com/details.asp?invtid ... 04&cpc=SCH
the chip on the card says "SAA7130HL"
i have got it working a few times on one channel, but after awhile the picture goes black or my browser just closes on its own. very frustrating seems like it works for awhile then stops.
lspci:
Code: Select all
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)
02:08.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
02:0a.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
Code: Select all
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffd0000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7c40
[ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131072
[ 0.000000] HighMem 131072 -> 131072
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131072
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E0010 checksum 0
[ 0.000000] ACPI: RSDP 000E0010, 0014 (r0 COMPAQ)
[ 0.000000] ACPI: RSDT 000E0080, 0054 (r1 COMPAQ CPQ0014 20001127 0)
[ 0.000000] ACPI: FACP 000E0130, 0074 (r1 COMPAQ SOLANO 1 0)
[ 0.000000] ACPI: DSDT 000E0204, 0B7D (r1 COMPAQ DSDT 1 MSFT 100000D)
[ 0.000000] ACPI: FACS 000E0040, 0040
[ 0.000000] ACPI: SSDT 000E0D81, 0174 (r1 COMPAQ CORE_UTL 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E0EF5, 0EC0 (r1 COMPAQ VILLTBL1 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E2D98, 005D (r1 COMPAQ FHUB 1 MSFT 100000D)
[ 0.000000] ACPI: APIC 000E01A4, 0060 (r1 COMPAQ SOLANO 1 0)
[ 0.000000] ACPI: SSDT 000E2D22, 0076 (r1 COMPAQ APIC 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E1DB5, 06AD (r1 COMPAQ PNP_PRSS 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E24C0, 01A4 (r1 COMPAQ S3 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E2664, 0150 (r1 COMPAQ PIDETM 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E290A, 00FD (r1 COMPAQ GTF0 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E27B4, 0156 (r1 COMPAQ SIDETM 1 MSFT 100000D)
[ 0.000000] ACPI: SSDT 000E2B10, 0109 (r1 COMPAQ GTF2 1 MSFT 100000D)
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:deea0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 000000001ffd0000 - 000000001fff0000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: root=UUID=daa1a8a7-0331-4973-8fdd-320ce2eaf5c4 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 863.871 MHz processor.
[ 14.356913] Console: colour VGA+ 80x25
[ 14.356922] console [tty0] enabled
[ 14.357823] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.358883] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.400792] Memory: 507524k/524288k available (2177k kernel code, 15968k reserved, 1006k data, 368k init, 0k highmem)
[ 14.400811] virtual kernel memory layout:
[ 14.400814] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 14.400817] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.400821] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 14.400824] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 14.400827] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 14.400830] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 14.400833] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 14.400841] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.400920] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 14.480930] Calibrating delay using timer specific routine.. 1729.40 BogoMIPS (lpj=3458800)
[ 14.480987] Security Framework initialized
[ 14.481003] SELinux: Disabled at boot.
[ 14.481034] AppArmor: AppArmor initialized
[ 14.481043] Failure registering capabilities with primary security module.
[ 14.481062] Mount-cache hash table entries: 512
[ 14.481313] Initializing cgroup subsys ns
[ 14.481323] Initializing cgroup subsys cpuacct
[ 14.481341] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 14.481365] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 14.481371] CPU: L2 cache: 256K
[ 14.481379] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 14.481401] Compat vDSO mapped to ffffe000.
[ 14.481430] Checking 'hlt' instruction... OK.
[ 14.497482] SMP alternatives: switching to UP code
[ 14.500505] Freeing SMP alternatives: 11k freed
[ 14.500794] Early unpacking initramfs... done
[ 15.310098] ACPI: Core revision 20070126
[ 15.310215] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.314395] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 15.314455] Total of 1 processors activated (1729.40 BogoMIPS).
[ 15.314596] ENABLING IO-APIC IRQs
[ 15.314798] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.460787] Brought up 1 CPUs
[ 15.460838] CPU0 attaching sched-domain:
[ 15.460844] domain 0: span 01
[ 15.460849] groups: 01
[ 15.461283] net_namespace: 64 bytes
[ 15.461298] Booting paravirtualized kernel on bare hardware
[ 15.462571] Time: 20:14:05 Date: 03/24/10
[ 15.462637] NET: Registered protocol family 16
[ 15.463161] EISA bus registered
[ 15.463195] ACPI: bus type pci registered
[ 15.464861] PCI: PCI BIOS revision 2.10 entry at 0xe8316, last bus=2
[ 15.464869] PCI: Using configuration type 1
[ 15.464887] Setting up standard PCI resources
[ 15.472344] ACPI: EC: Look up EC in DSDT
[ 15.477249] ACPI: Interpreter enabled
[ 15.477257] ACPI: (supports S0 S1 S3 S4 S5)
[ 15.477287] ACPI: Using IOAPIC for interrupt routing
[ 15.484381] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.484682] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
[ 15.484780] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
[ 15.485399] PCI: Transparent bridge - 0000:00:1e.0
[ 15.485443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.485831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 15.490976] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11)
[ 15.491155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 15.491333] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *9
[ 15.491505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11)
[ 15.491826] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.491907] pnp: PnP ACPI init
[ 15.491929] ACPI: bus type pnp registered
[ 15.497985] pnp: PnP ACPI: found 16 devices
[ 15.497995] ACPI: ACPI bus type pnp unregistered
[ 15.498004] PnPBIOS: Disabled by ACPI PNP
[ 15.498603] PCI: Using ACPI for IRQ routing
[ 15.498612] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.684722] NET: Registered protocol family 8
[ 15.684729] NET: Registered protocol family 20
[ 15.684912] AppArmor: AppArmor Filesystem Enabled
[ 15.688635] Time: tsc clocksource has been installed.
[ 15.696753] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 15.696773] system 00:0e: ioport range 0x400-0x41f has been reserved
[ 15.696780] system 00:0e: ioport range 0x420-0x43f has been reserved
[ 15.696787] system 00:0e: ioport range 0x440-0x45f has been reserved
[ 15.696794] system 00:0e: ioport range 0x460-0x47f has been reserved
[ 15.696802] system 00:0e: ioport range 0xf800-0xf81f has been reserved
[ 15.696809] system 00:0e: ioport range 0xf820-0xf83f has been reserved
[ 15.696815] system 00:0e: ioport range 0xf840-0xf85f has been reserved
[ 15.696822] system 00:0e: ioport range 0xf860-0xf87f has been reserved
[ 15.696830] system 00:0e: ioport range 0xfa00-0xfa3f has been reserved
[ 15.696837] system 00:0e: ioport range 0xfc00-0xfc7f has been reserved
[ 15.696843] system 00:0e: ioport range 0xfc80-0xfcff has been reserved
[ 15.696850] system 00:0e: ioport range 0xfe00-0xfe7f has been reserved
[ 15.696858] system 00:0e: ioport range 0xfe80-0xfeff has been reserved
[ 15.696876] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 15.696884] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 15.696892] system 00:0f: iomem range 0x100000-0x1fffffff could not be reserved
[ 15.696900] system 00:0f: iomem range 0xfff80000-0xffffffff could not be reserved
[ 15.696907] system 00:0f: iomem range 0xfeea0000-0xfeebffff could not be reserved
[ 15.696914] system 00:0f: iomem range 0xc9400-0xcbfff has been reserved
[ 15.727986] PCI: Bridge: 0000:00:01.0
[ 15.727993] IO window: disabled.
[ 15.728001] MEM window: 41000000-421fffff
[ 15.728007] PREFETCH window: 44000000-45ffffff
[ 15.728016] PCI: Bridge: 0000:00:1e.0
[ 15.728022] IO window: 1000-1fff
[ 15.728029] MEM window: 40000000-403fffff
[ 15.728035] PREFETCH window: disabled.
[ 15.728059] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.728090] NET: Registered protocol family 2
[ 15.764832] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 15.765525] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.767589] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.769863] TCP: Hash tables configured (established 65536 bind 65536)
[ 15.769876] TCP reno registered
[ 15.781044] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 16.465737] it is
[ 17.307006] Freeing initrd memory: 7328k freed
[ 17.308614] audit: initializing netlink socket (disabled)
[ 17.308650] audit(1269461645.804:1): initialized
[ 17.314311] VFS: Disk quotas dquot_6.5.1
[ 17.314542] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.314976] io scheduler noop registered
[ 17.314984] io scheduler anticipatory registered
[ 17.314989] io scheduler deadline registered
[ 17.315037] io scheduler cfq registered (default)
[ 17.315109] Boot video device is 0000:01:00.0
[ 17.315785] isapnp: Scanning for PnP cards...
[ 17.669620] isapnp: No Plug & Play device found
[ 17.758494] Real Time Clock Driver v1.12ac
[ 17.758713] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.758913] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.759226] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.760893] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.761487] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.763486] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.763663] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.763972] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 17.766435] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.766448] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.772113] mice: PS/2 mouse device common for all mice
[ 17.772411] EISA: Probing bus 0 at eisa.0
[ 17.772427] Cannot allocate resource for EISA slot 1
[ 17.772433] Cannot allocate resource for EISA slot 2
[ 17.772466] EISA: Detected 0 cards.
[ 17.772473] cpuidle: using governor ladder
[ 17.772477] cpuidle: using governor menu
[ 17.772876] NET: Registered protocol family 1
[ 17.772949] Using IPI No-Shortcut mode
[ 17.773019] registered taskstats version 1
[ 17.773207] Magic number: 2:76:246
[ 17.773256] hash matches device ttyw2
[ 17.773403] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.773408] EDD information not available.
[ 17.774466] Freeing unused kernel memory: 368k freed
[ 17.811874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.296642] fuse init (API version 7.9)
[ 19.349551] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.188864] SCSI subsystem initialized
[ 20.496141] libata version 3.00 loaded.
[ 20.555907] usbcore: registered new interface driver usbfs
[ 20.555975] usbcore: registered new interface driver hub
[ 20.623145] usbcore: registered new device driver usb
[ 20.644754] ata_piix 0000:00:1f.1: version 2.12
[ 20.644878] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.674876] scsi0 : ata_piix
[ 20.706848] USB Universal Host Controller Interface driver v3.0
[ 20.722811] scsi1 : ata_piix
[ 20.723246] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x2460 irq 14
[ 20.723253] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x2468 irq 15
[ 20.887307] ata1.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
[ 20.887319] ata1.00: 976773168 sectors, multi 16: LBA48
[ 20.903289] ata1.00: configured for UDMA/66
[ 20.954808] 8139too Fast Ethernet driver 0.9.28
[ 21.222942] ata2.00: ATAPI: LTN485, KQA4, max MWDMA2, CDB intr
[ 21.270721] Floppy drive(s): fd0 is 1.44M
[ 21.292691] FDC 0 is a post-1991 82077
[ 21.394834] ata2.00: configured for MWDMA2
[ 21.395143] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5
[ 21.395563] scsi 1:0:0:0: CD-ROM COMPAQ CD-ROM LTN485 KQA4 PQ: 0 ANSI: 5
[ 21.403188] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 16
[ 21.403215] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.403224] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 21.403791] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 21.403837] uhci_hcd 0000:00:1f.2: irq 16, io base 0x00002440
[ 21.404217] usb usb1: configuration #1 chosen from 1 choice
[ 21.404276] hub 1-0:1.0: USB hub found
[ 21.404291] hub 1-0:1.0: 2 ports detected
[ 21.507092] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 21.508015] eth0: RealTek RTL8139 at 0x1000, 00:10:b5:ce:9b:c2, IRQ 17
[ 21.508022] eth0: Identified 8139 chip type 'RTL-8139B'
[ 22.670035] Driver 'sd' needs updating - please use bus_type methods
[ 22.673918] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 22.673958] sd 0:0:0:0: [sda] Write Protect is off
[ 22.673966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.674016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.674198] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 22.674227] sd 0:0:0:0: [sda] Write Protect is off
[ 22.674234] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.674281] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.674292] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.687054] sda1 sda2 <sda5>
[ 22.704465] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.723869] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 22.723882] Uniform CD-ROM driver Revision: 3.20
[ 22.724012] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.730257] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.730308] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 23.130970] Attempting manual resume
[ 23.130980] swsusp: Resume From Partition 8:5
[ 23.130984] PM: Checking swsusp image.
[ 23.131360] PM: Resume from disk failed.
[ 23.216892] kjournald starting. Commit interval 5 seconds
[ 23.216923] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.841067] Linux agpgart interface v0.102
[ 31.954814] Intel 82802 RNG detected
[ 31.999871] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.078703] agpgart: Detected an Intel i815 Chipset.
[ 32.094764] agpgart: AGP aperture is 64M @ 0x48000000
[ 32.143201] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.226699] iTCO_vendor_support: vendor-support=0
[ 32.294678] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 32.295620] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 32.295637] iTCO_wdt: No card detected
[ 32.586893] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 34.158381] input: Power Button (FF) as /devices/virtual/input/input3
[ 34.173947] ACPI: Power Button (FF) [PWRF]
[ 34.174248] input: Power Button (CM) as /devices/virtual/input/input4
[ 34.193936] ACPI: Power Button (CM) [PBTN]
[ 34.537860] Linux video capture interface: v2.00
[ 35.725421] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 35.725633] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 35.725650] saa7130[0]: found at 0000:02:08.0, rev: 1, irq: 18, latency: 66, mmio: 0x40000000
[ 35.725663] saa7130[0]: subsystem: 1131:0000, board: AVerMedia DVD EZMaker [card=33,insmod option]
[ 35.725681] saa7130[0]: board init: gpio is c0f3fff
[ 35.830566] saa7130[0]: Huh, no eeprom present (err=-5)?
[ 35.830690] saa7130[0]: registered device video0 [v4l2]
[ 35.830764] saa7130[0]: registered device vbi0
[ 36.262773] eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 36.661292] nvidia: module license 'NVIDIA' taints kernel.
[ 37.232984] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 37.233512] NVRM: loading NVIDIA Linux x86 Kernel Module 71.86.04 Mon Jan 21 11:22:18 PST 2008
[ 38.349864] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 39.060772] NET: Registered protocol family 10
[ 39.061342] lo: Disabled Privacy Extensions
[ 39.468027] parport_pc 00:07: reported by Plug and Play ACPI
[ 39.468100] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 39.755659] saa7134 ALSA driver for DMA sound loaded
[ 39.755732] saa7130[0]/alsa: saa7130[0] at 0x40000000 irq 18 registered as card -2
[ 40.390351] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19
[ 40.390389] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 41.011508] intel8x0_measure_ac97_clock: measured 56030 usecs
[ 41.011519] intel8x0: clocking to 41139
[ 43.564229] loop: module loaded
[ 43.594407] lp0: using parport0 (interrupt-driven).
[ 43.722273] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k
[ 44.351358] EXT3 FS on sda1, internal journal
[ 46.202541] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.001828] No dock devices found.
[ 49.500353] eth0: no IPv6 routers present
[ 51.221810] apm: BIOS not found.
[ 51.503536] ppdev: user-space parallel port driver
[ 51.640984] audit(1269461681.243:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4858 profile="/usr/sbin/cupsd" namespace="default"
[ 61.449718] Bluetooth: Core ver 2.11
[ 61.451035] NET: Registered protocol family 31
[ 61.451046] Bluetooth: HCI device and connection manager initialized
[ 61.451055] Bluetooth: HCI socket layer initialized
[ 61.497336] Bluetooth: L2CAP ver 2.9
[ 61.497349] Bluetooth: L2CAP socket layer initialized
[ 61.522710] Bluetooth: RFCOMM socket layer initialized
[ 61.523236] Bluetooth: RFCOMM TTY layer initialized
[ 61.523246] Bluetooth: RFCOMM ver 1.8
[ 62.879138] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 62.879762] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 62.880110] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 63.158300] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 63.158948] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 63.159308] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Code: Select all
alias char-major-81 saa7130
options saa7134 card=33,33,33,33
