Many cameras

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
yurys
Posts: 6
Joined: Mon Dec 06, 2010 8:41 am

Many cameras

Post by yurys »

Hello!
I need connect 23 analog cameras and 9 ip to zoneminder.
Is it too much for zoneminder?
What capture cards recommend for 23 analog cameras?
christophe_y2k
Posts: 102
Joined: Mon Oct 12, 2009 8:47 am
Location: EUROPE-FRANCE-MANDELIEU

i use 16 ip camera

Post by christophe_y2k »

Hello i use 16 ip camera 640x480 and 720x756

(10 Sony camera records with detection mouvment "modect")

on older low network 4fps with Giga segment one cam at 10fps

with an dedicated intel xeon server
Xeon UP Quad-Core X3360 2.83GHz - FSB 1333MHz - 12Mo – 64Bits
Motherboard Intel S3210SHLC
4Go DDR2
4x1To SATA HardDisk on software RAID5 (mdam - xfs filesystem)
under Linux Gentoo 64 Operating System with ZoneMinder V1.23.3 (Load=22%)

Since 1,5 year

I don't use capture cards
Flash_
Posts: 441
Joined: Wed Jan 11, 2006 12:19 pm

Post by Flash_ »

Too much for zm? No - but it might be too much for your server...

Depends hugely on fps, image size, colour or B&W etc.
yurys
Posts: 6
Joined: Mon Dec 06, 2010 8:41 am

Post by yurys »

Thanks, I will test
Post Reply