Hi,
I wanted to know if i can get the zoneminder software to run on the raspberry pi, im running a flavour of debian.
I have xmbc running, but its turned off most of the time, so now its basically a headless web server,
Have apache2, php, mysql already up and running serving a website.
Can anyone shed any light on this?
Thanks in advance
Zoneminder on Raspberry Pi
Re: Zoneminder on Raspberry Pi
I found it fairly straight forward to install and get to work.
Used the latest wheezy image from the raspberrypi.org, did a bit of tweaking (overclock, sshd etc) and then sudo apt-get install zoneminder
Had to follow the instructions on the wiki to move the apache2 config along with a couple of other things http://www.zoneminder.com/wiki/index.ph ... rom_a_.deb
Also had to update the Memory.pm to hardcode the architecture as 32 bit
http://www.newit.co.uk/forum/index.php? ... pic=1035.0
With 1 IP camera it is running with a load average of 0.45 - I am now trying to see what can be done to optimise it - any suggestions?
Used the latest wheezy image from the raspberrypi.org, did a bit of tweaking (overclock, sshd etc) and then sudo apt-get install zoneminder
Had to follow the instructions on the wiki to move the apache2 config along with a couple of other things http://www.zoneminder.com/wiki/index.ph ... rom_a_.deb
Also had to update the Memory.pm to hardcode the architecture as 32 bit
http://www.newit.co.uk/forum/index.php? ... pic=1035.0
With 1 IP camera it is running with a load average of 0.45 - I am now trying to see what can be done to optimise it - any suggestions?
Re: Zoneminder on Raspberry Pi
Hi,
Last night I compiled and installed the latest version (ZM1.25) and seems that works. The CPU load was pretty high with 3 IPCAMs. Tonight I will try to do start again from scratch and post the steps to install the latest version.
PacoLM
Last night I compiled and installed the latest version (ZM1.25) and seems that works. The CPU load was pretty high with 3 IPCAMs. Tonight I will try to do start again from scratch and post the steps to install the latest version.
PacoLM
After more than 15 years, no longer using ZM as surveillance system.
Now in the dark side, using a commercial system...
-
- Posts: 106
- Joined: Wed Dec 15, 2010 11:20 am
- Location: Isle Of Wight, UK
Re: Zoneminder on Raspberry Pi
I am going to watch progress on this, as I want to build a CCTV recorder for my car.
Re: Zoneminder on Raspberry Pi
Anyone have any luck getting ZoneMinder on the latest Raspberry Pi?
I have the Rev B. board and am having some difficulties getting it functioning.
I installed ZoneMinder via apt-get
Tried to follow the additional steps located at:
http://www.zoneminder.com/wiki/index.ph ... rom_a_.deb
Got to the part where I need to install ant...had a couple of hiccups that I think i resolved correctly.
One major thing is I had forgotten to restart and resize the partition of my SDcard so it was running out of space (doh')
Installed JavaSDk via apt-get in order to build cambozola.jar
Ended up with currently installed:
java version "1.6.0_24"
OpenJDK Runtime Environment (IcedTea6.1.11.5) (6b24-1.11.5-1+rpi1)
OpenJDK Zero VM (build 20.0-b12, mixed mode)
First attempt at building yielded nothing.
Ran apt-get update
Rebooted
Attempted building and success!
Moved the newly built Cambola.jar files to the /usr/share/zoneminder directory
Tried logging in to the admin control panel via NetSurf. Input my username and password (default admin still)
Says the Page is Done loading, but all I get is a message across the top ZoneMinder Login" "Logging In"
Curiously, before I installed Java and Cambola I was able to login to ZoneMinder and poke around and look at all the settings, menus, etc...
Thoughts from any experts? (one of which I am not)
I have the Rev B. board and am having some difficulties getting it functioning.
I installed ZoneMinder via apt-get
Tried to follow the additional steps located at:
http://www.zoneminder.com/wiki/index.ph ... rom_a_.deb
Got to the part where I need to install ant...had a couple of hiccups that I think i resolved correctly.
One major thing is I had forgotten to restart and resize the partition of my SDcard so it was running out of space (doh')
Installed JavaSDk via apt-get in order to build cambozola.jar
Ended up with currently installed:
java version "1.6.0_24"
OpenJDK Runtime Environment (IcedTea6.1.11.5) (6b24-1.11.5-1+rpi1)
OpenJDK Zero VM (build 20.0-b12, mixed mode)
First attempt at building yielded nothing.
Ran apt-get update
Rebooted
Attempted building and success!
Moved the newly built Cambola.jar files to the /usr/share/zoneminder directory
Tried logging in to the admin control panel via NetSurf. Input my username and password (default admin still)
Says the Page is Done loading, but all I get is a message across the top ZoneMinder Login" "Logging In"
Curiously, before I installed Java and Cambola I was able to login to ZoneMinder and poke around and look at all the settings, menus, etc...
Thoughts from any experts? (one of which I am not)