Tenvis IP Cam; Unable to configure and view with ZM

Forum for questions and support relating to the 1.24.x releases only.
Locked
sloanm
Posts: 3
Joined: Sat Nov 03, 2012 8:40 pm

Tenvis IP Cam; Unable to configure and view with ZM

Post by sloanm »

I need help getting my tenvis PTZ camera working in ZM. The cam works on its own but not in ZM.
I have a Tenvis IP camera. I can see its video in Firefox with this URL

Code: Select all

81/videostream.cgi
When i try to place /videostream.cgi in the Source Remote Host Path I do not see any video. I see a black square when I try to view the video from zoneminder.

LINUX Mint Ubuntu based
I installed from the repos with apt-get install zoneminder and then I create a symbolic link to apache with.

To config the camera i followed the steps in this page
pitt-pladdy
/blog/_20111111-144944_0000_TENVIS_Camera_with_ZoneMinder_Linux_or_Mac_setup_/

I duplicate the General and Source page exactly.

I cant see any useful info in the /var/log/zm/ directory and syslog does not provide any useful info.

+++++++++++++
Here is the device info from the cam webpage
Device ID 00E04C8DC9F4
Device Firmware Version 0.37.2.36
Device Embeded Web UI Version 3.2.2.16
Alias IP Camera
Alarm Status None
DDNS Status No Action
UPnP Status No Action
P2P Status No Action
MSN Status No Action

apt-cache showpkg zoneminder

Package: zoneminder
Versions:
1.24.4-1

uname -a
Linux mini-mint12 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/LinuX


lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)
03:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
04:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
sloanm
Posts: 3
Joined: Sat Nov 03, 2012 8:40 pm

Re: Tenvis IP Cam; Unable to configure and view with ZM

Post by sloanm »

SOLVED:

User Error. I had not configured the correct url for the source line. problems with my username and what was recorded as a username via the cams built in web interface. The cam is working now.
Locked