Hye
Sorry for my english i'm french....
I Have buy a camera H264 720p in china.
This Model
cgi.ebay.fr/Newest-HD-1MP-H-264-Mjpeg-PT-wireless-wifi-Ip-Camera-With-Ir-Cut-SD-card-slot--/180986970329?pt=US_Security_Cameras&hash=item2a23aa00d9
I have found the command :
IPaddress:port/snapshot.cgi
IPaddress:port/videostream.cgi
IPaddress:port/stream.htm
IPaddress:port/streaminfo.htm
RTSP stream rtsp://login:password@IPaddress:port
MJPEG stream IPaddress:port/videostream.cgi?user=login&password=******
asf stream IPaddress:port/videostream.asf?user=login&password=******
snapshot IPaddress:port/snapshot.jpg?user=login&password=******
snapshot.jpg can also written as snap.cgi,snap.jpg or snapshot.cgi
htttp://IPaddress:port:port/videostream.asf?user=admin&password=admin
But, I add a monitor, it ok if the resolution is 640*480.
But then i put 1280*720, zm dont connect to my camera.
I Use remote, modect, http, simple, host name : the ip camera and host path /videostream.cgi?user=admin&pwd=admin
That is the solution for 720p?
Tks
H264 CCTV 1280*720 dont work with ZoneMinder
-
- Posts: 5
- Joined: Wed Jun 22, 2011 11:22 pm
Re: H264 CCTV 1280*720 dont work with ZoneMinder
Unfortunately I think you have a similar camera to mine (which you can see here: http://dx.com/p/ip-700mw-1mp-1-4-cmos-o ... rey-183283).
I have found that you can only get 1280x720 resolution if you use the provided OCX within IE browser, or you view the rtsp stream.
rtsp://<user>:<password>@<ip-address>:<port>/ works in VLC however I have no luck in getting it into ZM.
Have searched countless posts, but no luck.
M.
I have found that you can only get 1280x720 resolution if you use the provided OCX within IE browser, or you view the rtsp stream.
rtsp://<user>:<password>@<ip-address>:<port>/ works in VLC however I have no luck in getting it into ZM.
Have searched countless posts, but no luck.
M.
Re: H264 CCTV 1280*720 dont work with ZoneMinder
Hye
Tks for information.
For a stream in live, Ok, but for record in HD what solution ?
Nobody have the same problem ?
tks
Tks for information.
For a stream in live, Ok, but for record in HD what solution ?
Nobody have the same problem ?
tks
-
- Posts: 17
- Joined: Fri Feb 22, 2013 1:27 pm
Re: H264 CCTV 1280*720 dont work with ZoneMinder
I have had to do the following on the camera to make them work with RTSP
- change the FPS to a lower number, ZM cant handle the rate of the stream
- change the authentication to allow anonymous. This can be well hidden as I have not managed to get ZoneMinder to work with the rtsp://user:password@.... syntax
Re: H264 CCTV 1280*720 dont work with ZoneMinder
Hye
Tks for response.
But
IN zone minde that configuration ?
Name
Source Type
Function
And after, because rstp dont accept the format
rtsp://<user>:<password>@<ip-address>:<port>/
So how configurer this settings ?
Tks
Tks for response.
But
IN zone minde that configuration ?
Name
Source Type
Function
And after, because rstp dont accept the format
rtsp://<user>:<password>@<ip-address>:<port>/
So how configurer this settings ?
Tks
-
- Posts: 5111
- Joined: Wed Jun 08, 2005 8:07 pm
- Location: Midlands UK
Re: H264 CCTV 1280*720 dont work with ZoneMinder
Does the jpeg work in firefox at that resolution?
could be a shared mem size issue.
could be a shared mem size issue.
James Wilson
Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
Re: H264 CCTV 1280*720 dont work with ZoneMinder
I believe source should be set to ffmpeg
Re: H264 CCTV 1280*720 dont work with ZoneMinder
I have put the last firmware and now its works with rstp
rtsp://admin:admin@XXX.XXX.X.XXX:XX/h.264.sdp
But the video is corrupted like that
http://www.zoneminder.com/forums/viewto ... 21&t=18833
i have try ?tcp at the end but no work for me.
rtsp://admin:admin@XXX.XXX.X.XXX:XX/h.264.sdp
But the video is corrupted like that
http://www.zoneminder.com/forums/viewto ... 21&t=18833
i have try ?tcp at the end but no work for me.