Hi all.
Have falcon with bt878 with 4 tv-in. Have tested always zm with 1-st tv-in. Yesterday have connected 2-nd but have not video streaming, only black screen. What is happening?
Anatoliy.
Working only 1 tv-in
-
zoneminder
- Site Admin
- Posts: 5215
- Joined: Wed Jul 09, 2003 2:07 pm
- Location: Bristol, UK
- Contact:
Re: Working only 1 tv-in
Hi Anatoliy,
Do you know if the Falcon card multiplexes it's inputs or does it create four devices? If it's the former you will have to set up the second input as /dev/video1 otherwise it will probably be /dev/video0 but on channel 2.
Does it work with xawtv in either mode?
Phil,
Do you know if the Falcon card multiplexes it's inputs or does it create four devices? If it's the former you will have to set up the second input as /dev/video1 otherwise it will probably be /dev/video0 but on channel 2.
Does it work with xawtv in either mode?
Phil,
Re: Working only 1 tv-in
Hi Phil,
have tested with xawtv-working only first tv-in. The card multiplexes inputs becouse have only /dev/video0, and the zmu have tested only /dev/video0, didn`t see /dev/video1..3.. etc.
In the ZM I have tried /dev/video1..3 and other cannel too, didn`t see nothing. In windows is working, have tested. What do you think?
Regards,
Anatoliy.
have tested with xawtv-working only first tv-in. The card multiplexes inputs becouse have only /dev/video0, and the zmu have tested only /dev/video0, didn`t see /dev/video1..3.. etc.
In the ZM I have tried /dev/video1..3 and other cannel too, didn`t see nothing. In windows is working, have tested. What do you think?
Regards,
Anatoliy.