Page 2 of 2
Posted: Wed Oct 03, 2007 6:38 pm
by jameswilson
you grabing via jpeg or mjpeg, ie whats the path your using~?
Posted: Wed Oct 03, 2007 6:39 pm
by trevorj
/axis-cgi/mjpg/video.cgi?resolution=320x240
The resolution settings are correct, and that is the path I'm using.
Posted: Wed Oct 03, 2007 6:41 pm
by jameswilson
strange i had issues with jpeg grab on a 206m.
I use 206's on many sites with great success. Try using jpeg grabs and see if that helps
Posted: Wed Oct 03, 2007 6:42 pm
by trevorj
I will as soon as the camera itself is operational again. I tried to flash the firmware and it sort of died midway through, so now I have to wait for Axis tech support to tell me how to flash the memory.
Posted: Wed Oct 03, 2007 6:45 pm
by jameswilson
ah
good luck lol
Posted: Wed Oct 03, 2007 6:46 pm
by jameswilson
just had a thought you arnt trying to throttle the fps in zm on a mjpeg feed are you, ie your throttling the cam?
Posted: Wed Oct 03, 2007 7:05 pm
by trevorj
I have the Max FPS set to 12 via ZM, yes.
Posted: Wed Oct 03, 2007 7:08 pm
by jameswilson
thats your problem then
set it to 12 on the cam, or use jpg stream
Posted: Wed Oct 03, 2007 7:38 pm
by trevorj
Ah! I will test this when my camera works again and get back to you about the results.
Posted: Wed Oct 03, 2007 8:00 pm
by jameswilson
ok matey
Posted: Wed Oct 03, 2007 8:06 pm
by trevorj
Okay. It seems to be working without the frame constraint.
If I want to force users to log in to view the camera image, how do I go about passing a username/password along to Zoneminder, so it can log in?
Posted: Wed Oct 03, 2007 8:10 pm
by jameswilson
you mean on the cam?
if so add
user:pass@123.123.123.123
to the host once you have set a pass etc on the cam
Posted: Wed Oct 03, 2007 8:11 pm
by trevorj
Thanks! I figured it out by myself just as you posted it.
I think it's actually working now.