ZoneMinder Forums

Posted: **Wed Mar 26, 2008 10:55 am**

i believe, cordel knows what to do

http://www.zoneminder.com/forums/viewtopic.php?p=13915

Posted: **Thu Mar 27, 2008 8:52 am**

Problem is I'm not at all familure with that baord, google didn't turn up any working setups and the result list was short, and I don't have as much time as I used to. Although my rates haven't changed since then.

Posted: **Sun Mar 30, 2008 5:23 pm**

hi, this is finaly a Digi-flaower capture card FD2000-2400!! but i cant find any docs or installation guides under linux.
how can i change irq/pci sharing in bios...?
thx

Posted: **Sun Mar 30, 2008 6:37 pm**

You either set it in bios or move the card to a different slot.

Posted: **Sun Mar 30, 2008 7:30 pm**

Hi Cordel,

cordel wrote:You either set it in bios or move the card to a different slot.

i have try it but bttv0...btt03 are alwas sharing "ports" with other devices ist that a problem??

Posted: **Sun Mar 30, 2008 9:30 pm**

Yes it very well could be a problem. You can disable unused devices in bios to help and assign irqs to pci buss to help. But you must also have the correct driver loaded for that capture card as well.

Posted: **Wed Apr 02, 2008 7:09 pm**

hi, i think i will by a new one, it will be an kodicom 4400r or this one:
Hier dou you know it?
Thank you for your help

Posted: **Sat Apr 05, 2008 10:21 pm**

Yes I know the kodicom 4400, it's a fairly good card but can be stubern to configure.
Not a really good card for someone that don't understand how it works and even worse if you don't understand how to configure the linux kernel.
You would be better of with any of the PV cards provided by Bluecherry.

Posted: **Mon Apr 14, 2008 3:42 pm**

hi,
i have purchased an kodicom 4400, its running but in B/W .
after starting xawtv and turning on "Chroma agc" can see coulors again, but after system restart is it B/W again!!
any idea?
Thanks

ZoneMinder Forums

Card not recognized by kernel