ZoneMinder Forums

Code: Select all

#!/bin/bash

#Define link
URL="http://www.gaisma.com/en/location/berlin.html" 
TMPFILE1="/home/juricac/gaisma/tmp1.txt"
TMPFILE2="/home/juricac/gaisma/tmp2.txt"
TEMPHTMLNAME="/home/juricac/gaisma/temp.html"
LINK=$(wget -qO $TEMPHTMLNAME $URL)
TMP=$(sed -n '257,268p;268q' $TEMPHTMLNAME > $TMPFILE1|awk '(NR==3){print $2}' $TMPFILE1|awk -vRS="</i>" '/<i>/{gsub(/.*<i>/,"");print}' $TMPFILE1 > $TMPFILE2)
SUNRISE=$(head -1 $TMPFILE2)
SUNSET=$(awk 'NR==2' $TMPFILE2)
DAWN=$(awk 'NR==3' $TMPFILE2)
DUSK=$(awk 'NR==4' $TMPFILE2)
DAYSCRIPT="/home/juricac/gaisma/day.sh"
NIGHTSCRIPT="/home/juricac/gaisma/night.sh"

echo "Sunrise: $SUNRISE"
echo "Sunset: $SUNSET"
echo "Dawn: $DAWN"
echo "Dusk: $DUSK"

#Run scripts at specific time
at -f $DAYSCRIPT $DAWN
at -f $NIGHTSCRIPT $DUSK

#Remove temp files
rm -rf $TMPFILE1 $TMPFILE2 $TEMPHTMLNAME

Code: Select all

#!/bin/bash

#Values such as value=208 under brightness and contrast you can change if it dosent work
#good under your environment, also change value user and pwd, as well as URL of your 
#camera depending on your setup.

# Going to outdoor
    wget -O - http://192.168.0.75:80/camera_control.cgi?param=3\&value=2\&user=admin\&pwd=yourpassword
# Wait 10 seconds
    sleep 10
# Adding  brightness
     wget -O - http://192.168.0.75:80/camera_control.cgi?param=1\&value=208\&user=admin\&pwd=yourpassword
# Wait 10 seconds
        sleep 10

# Adding contrast
         wget -O - http://192.168.0.75:80/camera_control.cgi?param=2\&value=3\&user=admin\&pwd=yourpassword

# Wait 10 seconds for camera.
      sleep 10

#GOING BACK TO 50hZ again to fix camera colors
      wget -O - http://192.168.0.75:80/camera_control.cgi?param=3\&value=0\&user=admin\&pwd=yourpassword

# Wait 10 seconds for camera.
        sleep 10

# Going back to outdoor again!
    wget -O - http://192.168.0.75:80/camera_control.cgi?param=3\&value=2\&user=admin\&pwd=yourpassword

# Wait 10 seconds for camera.
          sleep 10

#Turning off IR
     wget -O - http://192.168.0.75:80/decoder_control.cgi?command=94\&user=admin\&pwd=yourpassword

# Wait 10 seconds for camera.
 sleep 10

Code: Select all

#!/bin/bash
#Parameters such as param=3, value=239 for brightness and contrast,you can change if its no#t looking good under your environment, user and pwd change acc#ordingly on each line as 
#well as URL of your camera.

# Going to 50hZ
    wget -O - http://192.168.0.75:80/camera_control.cgi?param=3\&value=0\&user=admin\&pwd=yourpassword
    # Wait 10 seconds for camera
    sleep 10
# Adding brightness
     wget -O - http://192.168.0.75:80/camera_control.cgi?param=1\&value=239\&user=admin\&pwd=yourpassword
# Wait 10 seconds for camera
     sleep 10

# Adding  contrast
 wget -O - http://192.168.0.75:80/camera_control.cgi?param=2\&value=5\&user=admin\&pwd=yourpassword
# Wait 10 seconds for camera
      sleep 10
# reset mode camera needs to go to outdoor mode again to fix camera colors
# Going back to  outdoor
     wget -O - http://192.168.0.75:80/camera_control.cgi?param=3\&value=2\&user=admin\&pwd=yourpassword
 # Wait 10 seconds for camera.
         sleep 10

#Going back to 50hZ, now camera colors are fixed
    wget -O - http://192.168.0.75:80/camera_control.cgi?param=3\&value=0\&user=admin\&pwd=yourpassword
# Wait 10 seconds for camera
            sleep 10
#Turning on IR
     wget -O - http://192.168.0.75:80/decoder_control.cgi?command=95\&user=admin\&pwd=yourpassword
#Wait 10 seconds for camera.
           sleep 10

Code: Select all

10 03 * * * /home/juricac/gaisma.sh