Page 2 of 2
Re: Noob First Time Install - No Video
Posted: Thu Dec 21, 2017 4:22 pm
by bbunge
Your source path need to have the info to connect to the camera. Like an IP address and log in information.
Re: Noob First Time Install - No Video
Posted: Fri Dec 22, 2017 5:42 pm
by jimkoh
When I put the full path in I don't even get the blue screen.
Re: Noob First Time Install - No Video
Posted: Sat Dec 23, 2017 3:51 pm
by rockedge
have you tried the Remote method? using an http:// URL to the camera like
http://admin:admin@192.168.2.123:554/videostream.cgi or
http://admin:admin@192.168.2.123:554/video/mjpeg.cgi...
I have dLink 930L that has several URL's that will work with both rtsp and http and jpeg and mjpeg will work depending on a the path...but you must be close ...the blue screen is a step way from a nice clear stream.
Re: Noob First Time Install - No Video
Posted: Tue Jan 09, 2018 4:43 pm
by jimkoh
Yes I have. I get a blue screen in IE and nothing in Firefox or Chrome because the cameras use shockwave/flash. The only way I can see video outside the native software is to use vlc with a path of rtsp://admin:admin@192.168.2.124:554/stream2
Re: Noob First Time Install - No Video
Posted: Wed Jan 10, 2018 5:50 pm
by rockedge
will that path not work at all in ZM? What is set at Options->Images->MPEG_LIVE_FORMAT and Options->Images->MPEG_REPLAY_FORMAT ??
Re: Noob First Time Install - No Video
Posted: Fri Jan 26, 2018 3:48 pm
by jimkoh
Both of those are set to swf.