Page 2 of 2
Re: Configuring control of PTZ unclear?
Posted: Fri Mar 29, 2024 7:57 am
by dougmccrary
Have you run nmap against it since reset?
Re: Configuring control of PTZ unclear?
Posted: Fri Mar 29, 2024 8:58 am
by eiger3970
No, but I have just now. I'm not sure how nmap helps find the path for the ptz control?
Code: Select all
linuxmint@linuxmint:~$ nmap 192.168.1.180
Starting Nmap 7.80 ( https://nmap.org ) at 2024-03-29 18:57 AEST
Nmap scan report for 192.168.1.180
Host is up (0.0017s latency).
Not shown: 997 closed ports
PORT STATE SERVICE
80/tcp open http
554/tcp open rtsp
8000/tcp open http-alt
Nmap done: 1 IP address (1 host up) scanned in 0.27 seconds
Re: Configuring control of PTZ unclear?
Posted: Fri Mar 29, 2024 9:45 am
by dougmccrary
Code: Select all
doug@doug-MS-7A38:~$ nmap 192.168.1.222
Starting Nmap 7.80 ( https://nmap.org ) at 2024-03-29 02:33 PDT
Nmap scan report for 192.168.1.222
Host is up (0.55s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
80/tcp open http
554/tcp open rtsp
1935/tcp open rtmp
8080/tcp open http-proxy
Nmap done: 1 IP address (1 host up) scanned in 79.19 seconds
It doesn't, explicitly. the above camera uses 8080. That may be sort of standard, I don't know. Yours seems to use 8000.
Re: Configuring control of PTZ unclear?
Posted: Fri Mar 29, 2024 12:06 pm
by eiger3970
Ok, so what might the Control Address be?
Currently the Control Address is rtsp://admin@192.168.1.180
Re: Configuring control of PTZ unclear?
Posted: Fri Mar 29, 2024 8:56 pm
by dougmccrary
See my earlier example. I can't guarantee anything because I can't find anything useful about this camera.
Something like <your_user>:<your_password>@192.168.1.180:8000/onvif
You might not need the user:password part, experiment and check the logs to see the camera response, if any.
Re: Configuring control of PTZ unclear?
Posted: Sat Mar 30, 2024 12:01 am
by eiger3970
The logs show this:
- Screenshot from 2024-03-30 10-00-52.png (158.48 KiB) Viewed 1926 times
Re: Configuring control of PTZ unclear?
Posted: Sat Mar 30, 2024 1:10 am
by dougmccrary
What have you got in the monitor control page?
Re: Configuring control of PTZ unclear?
Posted: Sat Mar 30, 2024 5:11 am
by eiger3970
Control Address: admin:<password>@192.168.1.180:554/onvif, where <password> means I have different text for a real password like ZoneMinderIsTheBestChuckOutTheRest. I'm keeping the password simple for now, as I don't think ZM could handle a more secure passphrase like: directory deepen shifting subduing
- Screenshot from 2024-03-30 15-11-58.png (59.98 KiB) Viewed 1897 times
Re: Configuring control of PTZ unclear?
Posted: Sat Mar 30, 2024 9:15 am
by dougmccrary
You didn't follow the example - control device.
maybe just /onvif or as shown: or something else entirely. No telling without specs, I don't see it in the iSpy list but feel free to see for yourself.
Re: Configuring control of PTZ unclear?
Posted: Sun Mar 31, 2024 10:17 am
by eiger3970
I put the specs in the 1st and 2nd post Sat Mar 23, 2024 7:10 pm
I followed the guide, but after a zm reboot, that funny setting appeared.
- Screenshot from 2024-04-01 16-41-10.png (98.15 KiB) Viewed 1803 times
Re: Configuring control of PTZ unclear?
Posted: Tue Apr 02, 2024 8:56 am
by eiger3970
Cancelled.
Seems camera is faulty.
Tried:
- camera's recommended phone app
Searching for an ONVIF compatible ptz camera, any suggestions?
Affordable, but able to read (or clear enough to zoom in) number plates would be incredible if such a product exists.