Page 2 of 2
Posted: Sun Nov 06, 2005 1:20 pm
by jameswilson
sorry for the delay on this one i must have missed your post sorry.
Did you ever get this working. I am using 2 blc-10s without robs at the moment on my home rig so i should be able to sort you out.
Panasonic BLC10A
Posted: Sat Dec 31, 2005 3:31 pm
by pcalleros
James, using the following settings:
for remote host path:
/nphMotionJpeg?Resolution=320x240&Quality=Standard
I see a picture but it alternates with a black picture.
Is there a way / setting that will allow me to see streaming Video?
Streaming Video and Control
Posted: Sat Dec 31, 2005 3:53 pm
by pcalleros
James, able to get a .27 frame rate using:
/SnapshotJPEG?Resolution=320x240&Quality=Precision&Count=18259238
am I just getting the same still with this?
now wanting to be able to pan and tilt...
Posted: Sat Dec 31, 2005 4:43 pm
by jameswilson
i use the mpeg mode.
regrading the pt functions if you enter the ip of the cam with a leading slash it should be ok using the other pana protocal thats in the list, I can get 15 fps using mpeg mode at med res but im running mine at 5 fps ish on 640x480
If you have a look at my sererv i have a panasonic cgi document that tells you all you need to know
James
Panasonic IP PTZ
Posted: Sat Dec 31, 2005 6:34 pm
by pcalleros
Hello James...so I am using:
/nphMotionJpeg?Resolution=320x240&Quality=Standard
for remote host path and...
xxx.xxx.xxx.xxx:xxx
Works great and I am totally impressed. Thinking of also buying WLAN version of same camera for outdoor use.
Posted: Sun Jan 01, 2006 2:53 am
by jameswilson
good stuff, let me know how it performs outside, low light etc, if you get one