Posted: Tue Aug 08, 2006 6:38 pm
Done, but zm4ms works still not yet.jameswilson wrote:ok go into settings in zm4ms clcik the paths tab and remove nph- from the live view path setting. You should be done then
ZoneMinder Forums
ZoneMinder Forums
https://forums.zoneminder.com/
Windows Live Viewer..27-11-05 Now Complete Frontend for ZM!!
Page 27 of 49
Posted: Tue Aug 08, 2006 6:46 pm
ok then i need to see a screen shot of your monitor settings in zm and in zm4ms
Posted: Tue Aug 08, 2006 7:05 pm
zm4ms you can see on page 25 in my posting.
Here are my monitor settings on ZM:
Here are my monitor settings on ZM:
Posted: Tue Aug 08, 2006 7:46 pm
ah just noticed a couple of things
monitor 2 has 2.. in the address remove 1
and you need to add a ':' infront of the port number if using anything other than 80, if using 80 then leave blank or insert :80
monitor 2 has 2.. in the address remove 1
and you need to add a ':' infront of the port number if using anything other than 80, if using 80 then leave blank or insert :80
Posted: Tue Aug 08, 2006 7:55 pm
Done, but zm4ms works still not yet.jameswilson wrote:ah just noticed a couple of things
monitor 2 has 2.. in the address remove 1
and you need to add a ':' infront of the port number if using anything other than 80, if using 80 then leave blank or insert :80
Posted: Tue Aug 08, 2006 8:23 pm
ok then im starting to run out of ideas, i can only assume you have your monitor numbers mixed up. Can you post a screenshot of your console
Posted: Wed Aug 09, 2006 2:53 pm
Posted: Wed Aug 09, 2006 10:50 pm
ok then i cant see anything obvious here either.
I will need to see a full path, remember eairlier how you git a path to the image eg http://1.1.1.1/zms?etcetc.
get that path and put in a browser and check you get an image, if you do post that complete path so i can see what it looks like
I will need to see a full path, remember eairlier how you git a path to the image eg http://1.1.1.1/zms?etcetc.
get that path and put in a browser and check you get an image, if you do post that complete path so i can see what it looks like
Posted: Sat Aug 12, 2006 6:39 am
Is it this what you mean?
When i type:
http://192.168.178.20/cgi-bin/zms?mode= ... 1155363699
in the Adressline of my Browser i can see the Picture.
btw: i have installed Cambozola, works fine.
When i type:
http://192.168.178.20/cgi-bin/zms?mode= ... 1155363699
in the Adressline of my Browser i can see the Picture.
btw: i have installed Cambozola, works fine.
Posted: Sat Aug 12, 2006 10:55 am
can you post your zm4ms live view path
becaus ethat should work
becaus ethat should work
Posted: Sat Aug 12, 2006 6:45 pm
The Path is:jameswilson wrote:can you post your zm4ms live view path
becaus ethat should work
/cgi-bin/zms
Posted: Sat Aug 12, 2006 6:55 pm
im lost then im afraid. I have never tried without aut and can only assume thats the issue.
If you put the whole path from the p[revious post "the one you put in a browser) and enable url mode that will work for live view
If you put the whole path from the p[revious post "the one you put in a browser) and enable url mode that will work for live view
Posted: Sat Aug 12, 2006 7:09 pm
Where can i enable the Authentication?jameswilson wrote:im lost then im afraid. I have never tried without aut and can only assume thats the issue.
Posted: Sat Aug 12, 2006 7:30 pm
you enable it in zm. I have never tested but before you do that check my previous suggestion of running zm4ms in url mode, just to check all is working before you enable auth. Maybe someone else has tried zm4ms without auth?
Posted: Sat Aug 12, 2006 7:44 pm
And how can switch zm4ms into "url mode"???jameswilson wrote:you enable it in zm. I have never tested but before you do that check my previous suggestion of running zm4ms in url mode, just to check all is working before you enable auth. Maybe someone else has tried zm4ms without auth?