Browser looses connection- refresh, refresh, refresh
Posted: Fri Dec 14, 2007 6:26 pm
I have been using ZM for a while starting with the LiveCD and Bluecherry LiveCD with excellent results on some old hardware. I am now needing a system with a little horse power and decided to build an AMD 64 server. I was unable to find a LiveCD for that platform so I installed Ubuntu 7.10 Server and experienced some difficulty with a generic(Sabrent?) saa7134 4 port card that loaded the messages logfile with "exit status 255" restarting zmc errors. So I ditched the saa7134 card for a PV-149 from bluecherry. Installed Open Suse 10.3 and hardware seems to be happy but I have a feeling something related to apache is not.
I would appreciate any assistance to solve this issue.
--Eric
The Box:
PV-149 detected as card=98, 3 inputs being used. 2 modect, 1 monitor.
AMD 4000+ dual core 64-bit, Gigiabyte board with Nvidia chipset, Nvidia Ethernet (forcedeth driver), 1GB Ram, 400 Gb SATA Disk. OpenSuse 10.3, ZM installed from wiki instructions - liquid repo, Yast
The Problem:
On 3 different PPC Macs, Camino browser seems to work better than most. 1 computer no errors at all ever. the other 2 will load the console page fairly quickly with a refresh or two.
Internet explorer 5.2 for Mac, granted is getting old but only able to get to login screen and user/pass input just repeats never getting to the console. Not that I care really, but, might shed some light.
WindowsXP, IE7, about 50% of the time, when opening the "ZM-Console" using http://10.0.0.105/zm/ it will pop up a page requesting user/pass but the font is real basic looking. Login and it refreshes with the login page again, but, this time a prettier looking font. login and the page will stall for 10-15 seconds and either show the console or give a page cannot be displayed error.
If I use http://10.0.0.105/zm/index.php adding the index.php it will almost always give a page cannot be displayed error. Refresh several times over a 15-20 second period and it will eventually load, maybe..
I even installed zm4ms and it seemed to work better, however, when left running a while it timed out and when refreshed, no feed.
Go to a browser on the same box, refresh the page http://10.0.0.105/zm/ several times and eventually getting it to load up, then, zm4ms loaded the cameras right up.
Firefox browser is less problematic, however, index.php will "timeout" and when refreshed, nothing for a time then it will load and login.
Logs:
The only thin that looks like an error to me would be from apache2 error_log everything else looks fine.
[Thu Dec 13 13:01:07 2007] [notice] Apache/2.2.4 (Linux/SUSE) mod_ssl/2.2.4 OpenSSL/0.9.8e PHP/5.2.4 with Suhosin-Patch configured -- resuming normal operations
[Thu Dec 13 15:37:40 2007] [warn] [client 127.0.0.1] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://127.0.0.1/zm/index.php?view=mont ... id=4&mode=
[Thu Dec 13 15:42:40 2007] [warn] [client 127.0.0.1] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://127.0.0.1/zm/index.php?view=mont ... id=4&mode=
[Thu Dec 13 15:42:40 2007] [error] [client 127.0.0.1] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
[Thu Dec 13 18:34:32 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=2&mode=
[Thu Dec 13 18:34:35 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=1&mode=
[Thu Dec 13 18:34:47 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=3&mode=
[Thu Dec 13 18:39:32 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=2&mode=
[Thu Dec 13 18:39:32 2007] [error] [client 96.240.43.245] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
[Thu Dec 13 18:39:35 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=1&mode=
[Thu Dec 13 18:39:35 2007] [error] [client 96.240.43.245] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
[Thu Dec 13 18:39:47 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=3&mode=
[Thu Dec 13 18:39:47 2007] [error] [client 96.240.43.245] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
dmesg
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
Command line: root=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG0QWNA-part2 vga=0x31a resume=/dev/sda1 splash=silent
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS)
BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data)
BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245744) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F6310, 0014 (r0 GBT )
ACPI: RSDT 3BFF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: FACP 3BFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: DSDT 3BFF30C0, 4463 (r1 GBT NVDAACPI 1000 MSFT 100000C)
ACPI: FACS 3BFF0000, 0040
ACPI: SSDT 3BFF75C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 3BFF7800, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98)
ACPI: MCFG 3BFF7840, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: APIC 3BFF7540, 007C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003bff0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245744) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003bff0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 245744
On node 0 totalpages: 245647
DMA zone: 56 pages used for memmap
DMA zone: 1270 pages reserved
DMA zone: 2673 pages, LIFO batch:0
DMA32 zone: 3303 pages used for memmap
DMA32 zone: 238345 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists. Total pages: 241018
Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG0QWNA-part2 vga=0x31a resume=/dev/sda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2109.594 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
CPU 0: aperture @ 3c0000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 959484k/982976k available (2050k kernel code, 23104k reserved, 1017k data, 316k init)
Calibrating delay using timer specific routine.. 4223.23 BogoMIPS (lpj=8446474)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4382k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 771 Objects with 88 Devices 296 Methods 32 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12557122
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4219.27 BogoMIPS (lpj=8438554)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
Brought up 2 CPUs
migration_cost=275
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e1ffffff
PCI: No mmconfig possible on device 00:18
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:...............................................................................
Initialized 32/32 Regions 1/1 Fields 31/31 Buffers 15/23 Packages (788 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 92 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
pnp: 00:01: iomem range 0x3c000000-0x3fffffff could not be reserved
pnp: 00:0c: iomem range 0xe0000000-0xe1ffffff could not be reserved
pnp: 00:0d: iomem range 0xd0000-0xd3fff has been reserved
pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
Time: hpet clocksource has been installed.
PCI: Bridge: 0000:01:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: e5000000-e50fffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: e5000000-e50fffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1197579627.680:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:0d.0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20002680000, using 10240k, total 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 98233 bytes
bootsplash: ...found (1280x1024, 35219 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.4
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 23
ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 23
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: HPA unlocked: 781420655 -> 781422768, native 781422768
ata3.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133
ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xe5104000
sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 21, io mem 0xe5105000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 1-1: new device found, idVendor=046d, idProduct=c00c
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Mouse
usb 1-1: Manufacturer: Logitech
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:05.0 -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:05.0 to 64
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:07.0 to 64
forcedeth: using HIGHDMA
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:04 failed with error -16
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
bttv0: Bt878 (rev 17) at 0000:02:08.0, irq: 16, latency: 32, mmio: 0xe5000000
bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460
bttv0: using: ProVideo PV150 [card=98,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #0 [sw]: Test OK
bttv0: using tuner=-1
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (1).
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
bttv1: Bt878 (rev 17) at 0000:02:09.0, irq: 17, latency: 32, mmio: 0xe5002000
bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461
bttv1: using: ProVideo PV150 [card=98,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #1 [sw]: Test OK
bttv1: using tuner=-1
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: i2c: checking for TDA9887 @ 0x86... not found
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (2).
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
bttv2: Bt878 (rev 17) at 0000:02:0a.0, irq: 18, latency: 32, mmio: 0xe5004000
bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462
bttv2: using: ProVideo PV150 [card=98,autodetected]
bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #2 [sw]: Test OK
bttv2: using tuner=-1
bttv2: i2c: checking for TDA9875 @ 0xb0... not found
bttv2: i2c: checking for TDA7432 @ 0x8a... not found
bttv2: i2c: checking for TDA9887 @ 0x86... not found
bttv2: registered device video2
bttv2: registered device vbi2
bttv2: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (3).
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
bttv3: Bt878 (rev 17) at 0000:02:0b.0, irq: 19, latency: 32, mmio: 0xe5006000
bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463
bttv3: using: ProVideo PV150 [card=98,autodetected]
bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #3 [sw]: Test OK
bttv3: using tuner=-1
bttv3: i2c: checking for TDA9875 @ 0xb0... not found
bttv3: i2c: checking for TDA7432 @ 0x8a... not found
bttv3: i2c: checking for TDA9887 @ 0x86... not found
bttv3: registered device video3
bttv3: registered device vbi3
bttv3: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:08.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
bt878_probe: card id=[0x1460aa00], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:08.1 disabled
bt878: probe of 0000:02:08.1 failed with error -22
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
bt878_probe: card id=[0x1461aa01], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:09.1 disabled
bt878: probe of 0000:02:09.1 failed with error -22
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
bt878_probe: card id=[0x1462aa02], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:0a.1 disabled
bt878: probe of 0000:02:0a.1 failed with error -22
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:0b.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
bt878_probe: card id=[0x1463aa03], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:0b.1 disabled
bt878: probe of 0000:02:0b.1 failed with error -22
Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
NET: Registered protocol family 17
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
bttv0: PLL can sleep, using XTAL (28636363).
bootsplash: status on console 0 changed to on
bttv1: PLL can sleep, using XTAL (28636363).
bttv2: PLL can sleep, using XTAL (28636363).
bttv3: PLL can sleep, using XTAL (28636363).
I would appreciate any assistance to solve this issue.
--Eric
The Box:
PV-149 detected as card=98, 3 inputs being used. 2 modect, 1 monitor.
AMD 4000+ dual core 64-bit, Gigiabyte board with Nvidia chipset, Nvidia Ethernet (forcedeth driver), 1GB Ram, 400 Gb SATA Disk. OpenSuse 10.3, ZM installed from wiki instructions - liquid repo, Yast
The Problem:
On 3 different PPC Macs, Camino browser seems to work better than most. 1 computer no errors at all ever. the other 2 will load the console page fairly quickly with a refresh or two.
Internet explorer 5.2 for Mac, granted is getting old but only able to get to login screen and user/pass input just repeats never getting to the console. Not that I care really, but, might shed some light.
WindowsXP, IE7, about 50% of the time, when opening the "ZM-Console" using http://10.0.0.105/zm/ it will pop up a page requesting user/pass but the font is real basic looking. Login and it refreshes with the login page again, but, this time a prettier looking font. login and the page will stall for 10-15 seconds and either show the console or give a page cannot be displayed error.
If I use http://10.0.0.105/zm/index.php adding the index.php it will almost always give a page cannot be displayed error. Refresh several times over a 15-20 second period and it will eventually load, maybe..
I even installed zm4ms and it seemed to work better, however, when left running a while it timed out and when refreshed, no feed.
Go to a browser on the same box, refresh the page http://10.0.0.105/zm/ several times and eventually getting it to load up, then, zm4ms loaded the cameras right up.
Firefox browser is less problematic, however, index.php will "timeout" and when refreshed, nothing for a time then it will load and login.
Logs:
The only thin that looks like an error to me would be from apache2 error_log everything else looks fine.
[Thu Dec 13 13:01:07 2007] [notice] Apache/2.2.4 (Linux/SUSE) mod_ssl/2.2.4 OpenSSL/0.9.8e PHP/5.2.4 with Suhosin-Patch configured -- resuming normal operations
[Thu Dec 13 15:37:40 2007] [warn] [client 127.0.0.1] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://127.0.0.1/zm/index.php?view=mont ... id=4&mode=
[Thu Dec 13 15:42:40 2007] [warn] [client 127.0.0.1] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://127.0.0.1/zm/index.php?view=mont ... id=4&mode=
[Thu Dec 13 15:42:40 2007] [error] [client 127.0.0.1] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
[Thu Dec 13 18:34:32 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=2&mode=
[Thu Dec 13 18:34:35 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=1&mode=
[Thu Dec 13 18:34:47 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=3&mode=
[Thu Dec 13 18:39:32 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=2&mode=
[Thu Dec 13 18:39:32 2007] [error] [client 96.240.43.245] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
[Thu Dec 13 18:39:35 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=1&mode=
[Thu Dec 13 18:39:35 2007] [error] [client 96.240.43.245] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
[Thu Dec 13 18:39:47 2007] [warn] [client 96.240.43.245] Timeout waiting for output from CGI script /srv/www/cgi-bin/nph-zms, referer: http://76.174.67.66:66/zm/index.php?vie ... id=3&mode=
[Thu Dec 13 18:39:47 2007] [error] [client 96.240.43.245] (70007)The timeout specified has expired: core_output_filter: Error reading from bucket.
dmesg
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
Command line: root=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG0QWNA-part2 vga=0x31a resume=/dev/sda1 splash=silent
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS)
BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data)
BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245744) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F6310, 0014 (r0 GBT )
ACPI: RSDT 3BFF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: FACP 3BFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: DSDT 3BFF30C0, 4463 (r1 GBT NVDAACPI 1000 MSFT 100000C)
ACPI: FACS 3BFF0000, 0040
ACPI: SSDT 3BFF75C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 3BFF7800, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98)
ACPI: MCFG 3BFF7840, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
ACPI: APIC 3BFF7540, 007C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003bff0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245744) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003bff0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 245744
On node 0 totalpages: 245647
DMA zone: 56 pages used for memmap
DMA zone: 1270 pages reserved
DMA zone: 2673 pages, LIFO batch:0
DMA32 zone: 3303 pages used for memmap
DMA32 zone: 238345 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists. Total pages: 241018
Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG0QWNA-part2 vga=0x31a resume=/dev/sda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2109.594 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
CPU 0: aperture @ 3c0000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 959484k/982976k available (2050k kernel code, 23104k reserved, 1017k data, 316k init)
Calibrating delay using timer specific routine.. 4223.23 BogoMIPS (lpj=8446474)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4382k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 771 Objects with 88 Devices 296 Methods 32 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12557122
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4219.27 BogoMIPS (lpj=8438554)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
Brought up 2 CPUs
migration_cost=275
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e1ffffff
PCI: No mmconfig possible on device 00:18
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:...............................................................................
Initialized 32/32 Regions 1/1 Fields 31/31 Buffers 15/23 Packages (788 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 92 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
pnp: 00:01: iomem range 0x3c000000-0x3fffffff could not be reserved
pnp: 00:0c: iomem range 0xe0000000-0xe1ffffff could not be reserved
pnp: 00:0d: iomem range 0xd0000-0xd3fff has been reserved
pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
Time: hpet clocksource has been installed.
PCI: Bridge: 0000:01:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: e5000000-e50fffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: e5000000-e50fffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1197579627.680:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:0d.0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20002680000, using 10240k, total 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 98233 bytes
bootsplash: ...found (1280x1024, 35219 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.4
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 23
ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 23
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: HPA unlocked: 781420655 -> 781422768, native 781422768
ata3.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133
ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xe5104000
sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 21, io mem 0xe5105000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 1-1: new device found, idVendor=046d, idProduct=c00c
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Mouse
usb 1-1: Manufacturer: Logitech
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:05.0 -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:05.0 to 64
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:07.0 to 64
forcedeth: using HIGHDMA
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:04 failed with error -16
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
bttv0: Bt878 (rev 17) at 0000:02:08.0, irq: 16, latency: 32, mmio: 0xe5000000
bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460
bttv0: using: ProVideo PV150 [card=98,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #0 [sw]: Test OK
bttv0: using tuner=-1
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (1).
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
bttv1: Bt878 (rev 17) at 0000:02:09.0, irq: 17, latency: 32, mmio: 0xe5002000
bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461
bttv1: using: ProVideo PV150 [card=98,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #1 [sw]: Test OK
bttv1: using tuner=-1
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: i2c: checking for TDA9887 @ 0x86... not found
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (2).
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
bttv2: Bt878 (rev 17) at 0000:02:0a.0, irq: 18, latency: 32, mmio: 0xe5004000
bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462
bttv2: using: ProVideo PV150 [card=98,autodetected]
bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #2 [sw]: Test OK
bttv2: using tuner=-1
bttv2: i2c: checking for TDA9875 @ 0xb0... not found
bttv2: i2c: checking for TDA7432 @ 0x8a... not found
bttv2: i2c: checking for TDA9887 @ 0x86... not found
bttv2: registered device video2
bttv2: registered device vbi2
bttv2: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (3).
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
bttv3: Bt878 (rev 17) at 0000:02:0b.0, irq: 19, latency: 32, mmio: 0xe5006000
bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463
bttv3: using: ProVideo PV150 [card=98,autodetected]
bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #3 [sw]: Test OK
bttv3: using tuner=-1
bttv3: i2c: checking for TDA9875 @ 0xb0... not found
bttv3: i2c: checking for TDA7432 @ 0x8a... not found
bttv3: i2c: checking for TDA9887 @ 0x86... not found
bttv3: registered device video3
bttv3: registered device vbi3
bttv3: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:08.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
bt878_probe: card id=[0x1460aa00], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:08.1 disabled
bt878: probe of 0000:02:08.1 failed with error -22
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
bt878_probe: card id=[0x1461aa01], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:09.1 disabled
bt878: probe of 0000:02:09.1 failed with error -22
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
bt878_probe: card id=[0x1462aa02], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:0a.1 disabled
bt878: probe of 0000:02:0a.1 failed with error -22
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:0b.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
bt878_probe: card id=[0x1463aa03], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:0b.1 disabled
bt878: probe of 0000:02:0b.1 failed with error -22
Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
NET: Registered protocol family 17
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
bttv0: PLL can sleep, using XTAL (28636363).
bootsplash: status on console 0 changed to on
bttv1: PLL can sleep, using XTAL (28636363).
bttv2: PLL can sleep, using XTAL (28636363).
bttv3: PLL can sleep, using XTAL (28636363).