Page 1 of 1

help need for plustek

Posted: Tue Mar 04, 2008 1:01 pm
by rsadanan
i have camera plustek

i tried with the fillowing code to view in internet explorer

<object id="Player" height="480" width="640" border="1"
classid="CLSID:745395C8-D0E1-4227-8586-624CA9A10A8D">
<param name="AutoStart" value="1">
<param name="UIMode" value="none">
<param name="MediaType" value="jpeg">
<param name="NetworkTimeout" value="5000">
<param name="MediaUsername" value="admin">
<param name="MediaPassword" value="password">
<param name="MediaURL" value="http://192.168.1.24:8084/cgi/mjpg/video.cgi">
</object>

can we add this camera in zoneminder

i tried with 320*240 and also 640*480 but i cannot see any image or video

i configured like

root:password@192.168.1.24
port :8084

path /cgi/mjpg/video.cgi

by the above code in ie i can see the video

any help will be appreciated


thanks in adv


byee....

Posted: Tue Mar 04, 2008 4:09 pm
by robi
Do you see anything, if you type this in FireFox?
http://admin:password@192.168.1.24:8084/cgi/mjpg/video.cgi

Posted: Fri Mar 07, 2008 6:05 pm
by rsadanan
by the above adress and path

i get acess refused

http://192.168.1.24:8084/cgi-bin/Stream ... ookie00000

i get streaming video by this adress

if configure this with zoneminder

i cannot get nothing

0 fps and blank


any idea

Posted: Mon Mar 10, 2008 10:45 am
by rsadanan
by the above code

http://admin:password@192.168.1.24:8084 ... /video.cgi

i get video in ie as well as in mozilla

but i cannot access in zm

my conf

admin:password@192.168.1.24

port 8084

/cgi/mjpg/video.cgi

320*240

i have configured on axis and plustek

axis works and plustek do nothing

in the console window it is in orange

any help please



a

Posted: Wed Apr 01, 2009 7:55 pm
by event
did you manage to aquire the stream? otherwise someone suggested

"at least you can pull jpeg snapshots off of the camera
http://82.233.39.160:90/snapshot.jpg"

is this possible with zoneminder right now?
that way cams could be watched over from windows pcs and data stored on linux using zoneminder

Posted: Sat Sep 05, 2009 8:57 pm
by knight-of-ni
After buying an IP1000 from Newegg last November, I finally got around to trying this camera out.

I tried the various remote host path's suggested in this thread, and the following thread...
http://www.zoneminder.com/forums/viewto ... ht=plustek

All in all, I was unable to get this camera to output a usable image without using IE or the junk Windows software the camera came with... not even "/snapshot.jpg" worked for me.

Anyway, just thought I would second the motion that one should avoid using this camera.