Card not recognized by kernel

Diabolos · Post by **Diabolos** » Tue Mar 18, 2008 1:17 pm

Hi @ all,
im a new user, after several weeks and retries i have finally installed zm under ubuntu 7.10 with success, but i have a problem with it; i have a digitalprotect pci capture card with 16 inputs (2 serial ports).
My problem is i can only see bluescreens with date and camname.
how can i solv it?
thx @all

caladeira · Post by **caladeira** » Tue Mar 18, 2008 5:14 pm

Hi there.

The blue screen means no video.

Since I don't know this card,

How do you setup your monitors?

/dev/video0(0)
/dev/video1(0)
....

How many FPS this card does? 100fps? 400fps?

Post here your monitor | source configuration and I'll try to help.

Best regards.

Diabolos · Post by **Diabolos** » Tue Mar 18, 2008 7:39 pm

Hi, i have this card http://security-center.de/de/espkat/docs/tv8807.pdf
is a german site, 100 pic/s

the philips usb webcam is now streaming, i have just switched to yuv420p

/dev/video0

the other cam which is plugged on the tv8807 is still strickin

dmesg |grep bttv shows an ...UNKOWN/GENERIC...

under windows xp depend nanobt 8 drivers (4 for audio and 4 for video) !!!

ls -v schows 02:0e.0 Multimedia video controller: Brootree Corporation BT878 Video Capture (rev 11) ...capabilities: <access>...
thx

caladeira · Post by **caladeira** » Tue Mar 18, 2008 11:12 pm

If I understand well your card is a TV8807 (the link you provide doesn't show any card).

And you haven't said how your inputs are configures in zone minder.

I'm not sure, but your inputs probably have to be setup this way:

Input 01 - /dev/video0(0)
Input 02 - /dev/video0(1)
Input 03 - /dev/video0(2)
Input 04 - /dev/video0(3)

Input 05 - /dev/video1(0)
Input 06 - /dev/video1(1)
Input 07 - /dev/video1(2)
Input 08 - /dev/video1(3)

Input 09 - /dev/video2(0)
Input 10 - /dev/video2(1)
Input 11 - /dev/video2(2)
Input 12 - /dev/video2(3)

Input 13 - /dev/video3(0)
Input 14 - /dev/video3(1)
Input 15 - /dev/video3(2)
Input 16 - /dev/video3(3)

If you're not sure your camera is working well, you can use a DVD/VHS composite output (Yellow RCA connector) as video feed.

Best regards.

Diabolos · Post by **Diabolos** » Wed Mar 19, 2008 9:30 am

hi, i have updated the link, is a pdf datasheet.

ubuntu detects the usb webcam on /dev/video0

from the card 4 inputs:
/dev/video1 i have here pluged a visortech cam model: an380mc
/dev/video2
/dev/video3
/dev/video4

the video feed is working well (on a tv via the composite output from the card) but in zyklus mode but not on zm!!

THX

Post by **cordel** » Wed Mar 19, 2008 10:23 am

Most likely each chip has four inputs/channles (0 to 3), have you defined these?
Would be like caladeira posted above. Your last post would suggest you overlooked them.

Diabolos · Post by **Diabolos** » Wed Mar 19, 2008 11:51 am

cordel wrote:Most likely each chip has four inputs/channles (0 to 3), have you defined these?
Would be like caladeira posted above. Your last post would suggest you overlooked them.

i have defined 5 monitors;

philips monitor /dev/video0 (0) <--- philips webcam plugged work

input01 digiprotect1 monitor /dev/video1(0) <--visor cam plugged bluescreen
input02 digiprotect2 monitor /dev/video1(1) <---no cam bluescreen
input03 digiprotect3 monitor /dev/video1(2) <---no cam bluescreen
input04 digiprotect4 monitor /dev/video1(3) <---no cam bluescreen
...

THX
//edit:
the tail -f... command shows:
.......[CanÂ´t find process with command of 'zma -m17']

tehre are 4x chips on the card: conexant fusion 878a 25878-13 0545y1fx

and a PLX chip: pci6140-aa33pc a0527a

and an atmel 0530 at89c2051-24pi

Post by **cordel** » Wed Mar 19, 2008 3:43 pm

Are you sure you have the cam on /dev/video1 chip and not on one of the others?
Are you sure that the card has been detected and setup by the kernel correctly.
Might have a go at going through some of the trouble shooting documentation, this way you can give us better information

http://www.zoneminder.com/forums/viewtopic.php?t=10820
http://www.zoneminder.com/wiki/index.php/FAQ

Diabolos · Post by **Diabolos** » Wed Mar 19, 2008 5:51 pm

cordel wrote:Are you sure you have the cam on /dev/video1 chip and not on one of the others?

i have tested all of the 16 inputs and every chanel with different video settings and mods!!

cordel wrote:Are you sure that the card has been detected and setup by the kernel correctly.

dmesg |grep bttv shows an ...UNKOWN/GENERIC...
ls -v schows 02:0e.0 Multimedia video controller: Brootree Corporation BT878 Video Capture (rev 11)
...capabilities: access denied ...

i had a go throgh the FAQ and trouble shooting threads

Post by **cordel** » Wed Mar 19, 2008 6:17 pm

I'm not personally familiar with that card, the fact you get a blue screen is a good sign but not a guarantee that it might work. The card does have to have the correct drivers loaded so ZM can control it. With any luck maybe some one that has this card working will happen along and give a clue as to the card type.

Otherwise I think lspci -vv and google might be your best bet and allot of toying around.
You could also search through:
http://www.bttv-gallery.de/high/index.html
and see if anything turns up there.

I do't suggest just looking through that page as there are alot of cards listed on that page, lspci should turnup something usefull.

Diabolos · Post by **Diabolos** » Wed Mar 26, 2008 12:59 am

morning @ all, its me again,

my displays are stil blue, i have some logs for you, help me plz

Code: Select all

spock@ZmBox:~$ sudo zmu -d/dev/video0 -q -v
Video Capabilities
  Name: BT878 video ( *** UNKNOWN/GENER
  Type: 171
    Can capture
    Can tune
    Overlay onto frame buffer
    Can clip
    Scalable
  Video Channels: 4
  Audio Channels: 1
  Maximum Width: 640
  Maximum Height: 576
  Minimum Width: 48
  Minimum Height: 32
Window Attributes
  X Offset: 0
  Y Offset: 0
  Width: 320
  Height: 240
Picture Attributes
  Palette: 4 - 24bit RGB
  Colour Depth: 24
  Brightness: 32768
  Hue: 32768
  Colour :32768
  Contrast: 32768
  Whiteness: 0
Channel 0 Attributes
  Name: Television
  Channel: 0
  Flags: 3
    Channel has a tuner
    Channel has audio
  Type: 1 - TV
  Format: 3 - AUTO
Channel 1 Attributes
  Name: Composite1
  Channel: 1
  Flags: 2
    Channel has audio
  Type: 2 - Camera
  Format: 3 - AUTO
Channel 2 Attributes
  Name: S-Video
  Channel: 2
  Flags: 2
    Channel has audio
  Type: 2 - Camera
  Format: 3 - AUTO
Channel 3 Attributes
  Name: Composite3
  Channel: 3
  Flags: 2
    Channel has audio
  Type: 2 - Camera
  Format: 3 - AUTO

Code: Select all

spock@ZmBox:~$ dmesg | grep bttv
[   37.058201] bttv: driver version 0.9.17 loaded
[   37.058213] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   37.058365] bttv: Bt8xx card found (0).
[   37.058455] bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 11, latency: 64, mmio: 0xcdbfe000
[   37.058472] bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
[   37.058539] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
[   38.358419] bttv0: using tuner=-1
[   38.358425] bttv0: i2c: checking for MSP34xx @ 0x80... <6>input: PS/2 Generic Mouse as /class/input/input3
[   38.582719] bttv0: i2c: checking for TDA9875 @ 0xb0... found
[   38.622446] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   38.622961] bttv0: i2c: checking for TDA9887 @ 0x86... found
[   38.623644] bttv0: registered device video0
[   38.623720] bttv0: registered device vbi0
[   38.623803] bttv: Bt8xx card found (1).
[   38.623891] bttv1: Bt878 (rev 17) at 0000:02:0d.0, irq: 5, latency: 64, mmio: 0xcdbfc000
[   38.623910] bttv1: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
[   38.623963] bttv1: gpio: en=00000000, out=00000000 in=007fffff [init]
[   39.419591] bttv1: using tuner=-1
[   39.419787] bttv1: registered device video1
[   39.419845] bttv1: registered device vbi1
[   39.419915] bttv: Bt8xx card found (2).
[   39.419990] bttv2: Bt878 (rev 17) at 0000:02:0e.0, irq: 5, latency: 64, mmio: 0xcdbfa000
[   39.420020] bttv2: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
[   39.420071] bttv2: gpio: en=00000000, out=00000000 in=00bf7fff [init]
[   40.218901] bttv2: using tuner=-1
[   40.219520] bttv2: registered device video2
[   40.219808] bttv2: registered device vbi2
[   40.311132] bttv: Bt8xx card found (3).
[   40.311232] bttv3: Bt878 (rev 17) at 0000:02:0f.0, irq: 11, latency: 64, mmio: 0xcdbf8000
[   40.311257] bttv3: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
[   40.311319] bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   41.110135] bttv3: using tuner=-1
[   41.110932] bttv3: registered device video3
[   41.111251] bttv3: registered device vbi3

Code: Select all

spock@ZmBox:~$ xawtv -hwscan
[: 12: (opcode:: unexpected operator
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.22-14-generic)
looking for available devices
port 306-337
    type : Xvideo, image scaler
    name : NV05 Video Blitter

/dev/video0: OK                         [ -device /dev/video0 ]
    type : v4l2
    name : BT878 video ( *** UNKNOWN/GENER
    flags: overlay capture tuner 

/dev/video1: OK                         [ -device /dev/video1 ]
    type : v4l2
    name : BT878 video ( *** UNKNOWN/GENER
    flags: overlay capture tuner 

/dev/video2: OK                         [ -device /dev/video2 ]
    type : v4l2
    name : BT878 video ( *** UNKNOWN/GENER
    flags: overlay capture tuner 

/dev/video3: OK                         [ -device /dev/video3 ]
    type : v4l2
    name : BT878 video ( *** UNKNOWN/GENER
    flags: overlay capture tuner

Code: Select all

spock@ZmBox:~$ lspci -vv
----------SNIP---------------
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Latency: 64 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at cdbfe000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at cdbff000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Latency: 64 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at cdbfc000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at cdbfd000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Latency: 64 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at cdbfa000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at cdbfb000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Latency: 64 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at cdbf8000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

02:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at cdbf9000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access>

an other branding for the card!!
http://vangold.en.alibaba.com/product/5 ... _Card.html

http://vangold.en.alibaba.com/product/5 ... l?index=30

Many THX

//edit:
@ cordel here is the hole lspci -vv, i have edited my post in this thread

Post by **cordel** » Wed Mar 26, 2008 2:15 am

cordel wrote:I'm not personally familiar with that card, the fact you get a blue screen is a good sign but not a guarantee that it might work. The card does have to have the correct drivers loaded so ZM can control it. With any luck maybe some one that has this card working will happen along and give a clue as to the card type.

Otherwise I think lspci -vv and google might be your best bet and allot of toying around.
You could also search through:
http://www.bttv-gallery.de/high/index.html
and see if anything turns up there.

I do't suggest just looking through that page as there are alot of cards listed on that page, lspci should turnup something usefull.

If you run and post a snip of the results for the capture card of lspci -vv
some one might be able to help, otherwise we are guessing like you are.

Also moved this to it's own topic as it is rude to hijack someone elses thread.

Thanks,
Corey

Diabolos · Post by **Diabolos** » Wed Mar 26, 2008 9:34 am

cordel wrote:
If you run and post a snip of the results for the capture card of lspci -vv
some one might be able to help, otherwise we are guessing like you are.

Also moved this to it's own topic as it is rude to hijack someone elses thread.

Thanks,
Corey

hi Cordel i have pastetd the hole lspci -vv log above, could you plz take a look?
Thanks

Post by **cordel** » Wed Mar 26, 2008 9:58 am

I gave you the wrong command

, this is why I have the commands listed in the FAQ in the wiki along with their purpose.

scanpci -v

You should then be able to google for the cardvendor and card and try out the various tidbits you find till you find what gets it working.

Diabolos · Post by **Diabolos** » Wed Mar 26, 2008 10:38 am

nevermind,
here is the scanpci -v log, im a newbie in linux, help me plz

Code: Select all

spock@ZmBox:~$ sudo scanpci -v
[sudo] password for spock:

pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1039 device 0x0735
 Silicon Integrated Systems [SiS] 735 Host
  STATUS    0x2210  COMMAND 0x0007
  CLASS     0x06 0x00 0x00  REVISION 0x01
  BIST      0x00  HEADER 0x80  LATENCY 0x20  CACHE 0x00
  BASE0     0xd0000000  addr 0xd0000000  MEM

pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1039 device 0x0001
 Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
  STATUS    0x0000  COMMAND 0x0107
  CLASS     0x06 0x04 0x00  REVISION 0x00
  HEADER    0x01  LATENCY 0x40
  PRIBUS    0x00  SECBUS 0x01  SUBBUS 0x01
  SECLT     0x40  SECSTATUS 0x2000
  IOBASE    0xf000  IOLIM 0x0fff
  NOPREFETCH_MEMBASE 0xcdd00000  MEMLIM 0xcfdfffff
  PREFETCH_MEMBASE   0xbd900000  MEMLIM 0xcdafffff
  NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN NO_ISA_EN SERR_EN NO_PERR_EN

pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x1039 device 0x0018
 Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
  STATUS    0x0200  COMMAND 0x000f
  CLASS     0x06 0x01 0x00  REVISION 0x00
  BIST      0x00  HEADER 0x80  LATENCY 0x00  CACHE 0x00
  BYTE_0    0xd8  BYTE_1  0x0b  BYTE_2  0x0b  BYTE_3  0x0a

pci bus 0x0000 cardnum 0x02 function 0x01: vendor 0x1039 device 0x0016
 Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
  STATUS    0x0200  COMMAND 0x0001
  CLASS     0x0c 0x05 0x00  REVISION 0x00
  BIST      0x00  HEADER 0x00  LATENCY 0x00  CACHE 0x00
  BASE4     0x00000c01  addr 0x00000c00  I/O
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x02  INT_LINE 0x00
  BYTE_0    0x01  BYTE_1  0x00  BYTE_2  0x00  BYTE_3  0x00

pci bus 0x0000 cardnum 0x02 function 0x02: vendor 0x1039 device 0x7001
 Silicon Integrated Systems [SiS] USB 1.0 Controller
  STATUS    0x0280  COMMAND 0x0117
  CLASS     0x0c 0x03 0x10  REVISION 0x07
  BIST      0x00  HEADER 0x00  LATENCY 0x40  CACHE 0x08
  BASE0     0xcfffe000  addr 0xcfffe000  MEM
  MAX_LAT   0x50  MIN_GNT 0x00  INT_PIN 0x04  INT_LINE 0x05

pci bus 0x0000 cardnum 0x02 function 0x03: vendor 0x1039 device 0x7001
 Silicon Integrated Systems [SiS] USB 1.0 Controller
  STATUS    0x0280  COMMAND 0x0117
  CLASS     0x0c 0x03 0x10  REVISION 0x07
  BIST      0x00  HEADER 0x00  LATENCY 0x40  CACHE 0x08
  BASE0     0xcffff000  addr 0xcffff000  MEM
  MAX_LAT   0x50  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x0a

pci bus 0x0000 cardnum 0x02 function 0x05: vendor 0x1039 device 0x5513
 Silicon Integrated Systems [SiS] 5513 [IDE]
  STATUS    0x0000  COMMAND 0x0005
  CLASS     0x01 0x01 0x80  REVISION 0xd0
  BIST      0x00  HEADER 0x80  LATENCY 0x80  CACHE 0x00
  BASE4     0x0000ff01  addr 0x0000ff00  I/O
  BYTE_0    0x31  BYTE_1  0x81  BYTE_2  0x00  BYTE_3  0x00

pci bus 0x0000 cardnum 0x0b function 0x00: vendor 0x3388 device 0x0021
 Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode)
  STATUS    0x0290  COMMAND 0x0106
  CLASS     0x06 0x04 0x00  REVISION 0x11
  HEADER    0x01  LATENCY 0x40
  PRIBUS    0x00  SECBUS 0x02  SUBBUS 0x02
  SECLT     0x40  SECSTATUS 0x2280
  IOBASE    0xf000  IOLIM 0x0fff
  NOPREFETCH_MEMBASE 0xcfe00000  MEMLIM 0xcfefffff
  PREFETCH_MEMBASE   0xcdb00000  MEMLIM 0xcdbfffff
  NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN NO_ISA_EN SERR_EN PERR_EN

pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x10ec device 0x8139
 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
  STATUS    0x0280  COMMAND 0x0107
  CLASS     0x02 0x00 0x00  REVISION 0x10
  BIST      0x00  HEADER 0x00  LATENCY 0x40  CACHE 0x00
  BASE0     0x0000dc01  addr 0x0000dc00  I/O
  BASE1     0xcfffdf00  addr 0xcfffdf00  MEM
  MAX_LAT   0x40  MIN_GNT 0x20  INT_PIN 0x01  INT_LINE 0x05

pci bus 0x0000 cardnum 0x13 function 0x00: vendor 0x1106 device 0x3038
 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 CardVendor 0x0925 card 0x1234 (VIA Technologies, Inc. (Wrong ID) USB Controller)
  STATUS    0x0210  COMMAND 0x0017
  CLASS     0x0c 0x03 0x00  REVISION 0x50
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x08
  BASE4     0x0000d401  addr 0x0000d400  I/O
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x0b
  BYTE_0    0x40  BYTE_1  0x12  BYTE_2  0x03  BYTE_3  0x00

pci bus 0x0000 cardnum 0x13 function 0x01: vendor 0x1106 device 0x3038
 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 CardVendor 0x0925 card 0x1234 (VIA Technologies, Inc. (Wrong ID) USB Controller)
  STATUS    0x0210  COMMAND 0x0017
  CLASS     0x0c 0x03 0x00  REVISION 0x50
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x08
  BASE4     0x0000d801  addr 0x0000d800  I/O
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x02  INT_LINE 0x0b
  BYTE_0    0x40  BYTE_1  0x12  BYTE_2  0x03  BYTE_3  0x00

pci bus 0x0000 cardnum 0x13 function 0x02: vendor 0x1106 device 0x3104
 VIA Technologies, Inc. USB 2.0
 CardVendor 0x0925 card 0x1234 (VIA Technologies, Inc. (Wrong ID), Card unknown)
  STATUS    0x0210  COMMAND 0x0017
  CLASS     0x0c 0x03 0x20  REVISION 0x51
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x10
  BASE0     0xcfffde00  addr 0xcfffde00  MEM
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x03  INT_LINE 0x0a
  BYTE_0    0x00  BYTE_1  0x02  BYTE_2  0x01  BYTE_3  0x00

pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10de device 0x0201
 nVidia Corporation NV20 [GeForce3 Ti 200]
 CardVendor 0x1462 card 0x5113 (Micro-Star International Co., Ltd., Card unknown)
  STATUS    0x02b0  COMMAND 0x0007
  CLASS     0x03 0x00 0x00  REVISION 0xa3
  BIST      0x00  HEADER 0x00  LATENCY 0xf8  CACHE 0x00
  BASE0     0xce000000  addr 0xce000000  MEM
  BASE1     0xc0000008  addr 0xc0000000  MEM PREFETCHABLE
  BASE2     0xcda80008  addr 0xcda80000  MEM PREFETCHABLE
  MAX_LAT   0x01  MIN_GNT 0x05  INT_PIN 0x01  INT_LINE 0x0b
  BYTE_0    0x62  BYTE_1  0x14  BYTE_2  0x13  BYTE_3  0x51

pci bus 0x0002 cardnum 0x0c function 0x00: vendor 0x109e device 0x036e
 Brooktree Corporation Bt878 Video Capture
  STATUS    0x0290  COMMAND 0x0106
  CLASS     0x04 0x00 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbfe008  addr 0xcdbfe000  MEM PREFETCHABLE
  MAX_LAT   0x28  MIN_GNT 0x10  INT_PIN 0x01  INT_LINE 0x0b

pci bus 0x0002 cardnum 0x0c function 0x01: vendor 0x109e device 0x0878
 Brooktree Corporation Bt878 Audio Capture
  STATUS    0x0290  COMMAND 0x0102
  CLASS     0x04 0x80 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbff008  addr 0xcdbff000  MEM PREFETCHABLE
  MAX_LAT   0xff  MIN_GNT 0x04  INT_PIN 0x01  INT_LINE 0x0b

pci bus 0x0002 cardnum 0x0d function 0x00: vendor 0x109e device 0x036e
 Brooktree Corporation Bt878 Video Capture
  STATUS    0x0290  COMMAND 0x0106
  CLASS     0x04 0x00 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbfc008  addr 0xcdbfc000  MEM PREFETCHABLE
  MAX_LAT   0x28  MIN_GNT 0x10  INT_PIN 0x01  INT_LINE 0x0a

pci bus 0x0002 cardnum 0x0d function 0x01: vendor 0x109e device 0x0878
 Brooktree Corporation Bt878 Audio Capture
  STATUS    0x0290  COMMAND 0x0102
  CLASS     0x04 0x80 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbfd008  addr 0xcdbfd000  MEM PREFETCHABLE
  MAX_LAT   0xff  MIN_GNT 0x04  INT_PIN 0x01  INT_LINE 0x0a

pci bus 0x0002 cardnum 0x0e function 0x00: vendor 0x109e device 0x036e
 Brooktree Corporation Bt878 Video Capture
  STATUS    0x0290  COMMAND 0x0106
  CLASS     0x04 0x00 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbfa008  addr 0xcdbfa000  MEM PREFETCHABLE
  MAX_LAT   0x28  MIN_GNT 0x10  INT_PIN 0x01  INT_LINE 0x05

pci bus 0x0002 cardnum 0x0e function 0x01: vendor 0x109e device 0x0878
 Brooktree Corporation Bt878 Audio Capture
  STATUS    0x0290  COMMAND 0x0102
  CLASS     0x04 0x80 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbfb008  addr 0xcdbfb000  MEM PREFETCHABLE
  MAX_LAT   0xff  MIN_GNT 0x04  INT_PIN 0x01  INT_LINE 0x05

pci bus 0x0002 cardnum 0x0f function 0x00: vendor 0x109e device 0x036e
 Brooktree Corporation Bt878 Video Capture
  STATUS    0x0290  COMMAND 0x0106
  CLASS     0x04 0x00 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbf8008  addr 0xcdbf8000  MEM PREFETCHABLE
  MAX_LAT   0x28  MIN_GNT 0x10  INT_PIN 0x01  INT_LINE 0x0b

pci bus 0x0002 cardnum 0x0f function 0x01: vendor 0x109e device 0x0878
 Brooktree Corporation Bt878 Audio Capture
  STATUS    0x0290  COMMAND 0x0102
  CLASS     0x04 0x80 0x00  REVISION 0x11
  BIST      0x00  HEADER 0x80  LATENCY 0x40  CACHE 0x00
  BASE0     0xcdbf9008  addr 0xcdbf9000  MEM PREFETCHABLE
  MAX_LAT   0xff  MIN_GNT 0x04  INT_PIN 0x01  INT_LINE 0x0b

pci bus 0x00ad cardnum 0x11 function 0x00: vendor 0xffff device 0xffff
 Device unknown
  STATUS    0xffff  COMMAND 0xffff
  CLASS     0xff 0xff 0xff  REVISION 0xff
  BIST      0xff  HEADER 0x00  LATENCY 0xff  CACHE 0xff
  BASE0     0xffffffff  addr 0xfffffffc  I/O
  BASE1     0xffffffff  addr 0xfffffffc  I/O
  BASE2     0xffffffff  addr 0xfffffffc  I/O
  BASE3     0xffffffff  addr 0xfffffffc  I/O
  BASE4     0xffffffff  addr 0xfffffffc  I/O
  BASE5     0xffffffff  addr 0xfffffffc  I/O
  BASEROM   0xffffffff  addr 0xffff8000  decode-enabled
  MAX_LAT   0xff  MIN_GNT 0xff  INT_PIN 0xff  INT_LINE 0xff
  BYTE_0    0xff  BYTE_1  0xff  BYTE_2  0xff  BYTE_3  0xff

Code: Select all

spock@ZmBox:~$ cat /proc/interrupts
           CPU0       
  0:      82503    XT-PIC-XT        timer
  1:        154    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  5:      22908    XT-PIC-XT        ohci_hcd:usb1, eth0, bttv2
  6:          3    XT-PIC-XT        floppy
  7:          0    XT-PIC-XT        parport0
  8:          3    XT-PIC-XT        rtc
  9:          1    XT-PIC-XT        acpi
 10:      23001    XT-PIC-XT        ohci_hcd:usb2, ehci_hcd:usb5, bttv1
 11:      66695    XT-PIC-XT        uhci_hcd:usb3, uhci_hcd:usb4, bttv0, bttv3, nvidia
 12:       1427    XT-PIC-XT        i8042
 14:      75414    XT-PIC-XT        libata
 15:       4010    XT-PIC-XT        libata
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0

many thx