Streaming from IP CAM via HTTPS, Port 443?

[betulichergutmensch]

Hi Phil and everyone else,

I'm trying to get pictures from an Axis 210A, normal http:80 works fine already.

But I should get it to work with an https:443 connection (this IP cam is directly connected to the internet, so unsecure transmission is just no opportunity).

So just changing the ports does not bring any efforts... and zmdc repeats:

06.05.2008 20:57:37.275438 zmdc[13399].INF ['zmc -m 3' stopping at 08/05/06 20:57:37]
06.05.2008 20:57:37.414234 zmdc[13399].INF ['zmc -m 3' exited normally]
06.05.2008 20:57:37.768694 zmdc[13399].INF ['zmc -m 3' starting at 08/05/06 20:57:37, pid = 15597]
06.05.2008 20:57:38.206244 zmdc[13399].WAR [Can't find process with command of 'zma -m 3']
06.05.2008 20:57:38.250389 zmdc[13399].ERR ['zmc -m 3' exited abnormally, exit status 11]
06.05.2008 20:57:38.251184 zmdc[13399].INF [Starting pending process, zmc -m 3]
06.05.2008 20:57:38.272976 zmdc[13399].INF ['zmc -m 3' starting at 08/05/06 20:57:38, pid = 15600]
06.05.2008 20:57:38.647549 zmdc[13399].ERR ['zmc -m 3' exited abnormally, exit status 11]
06.05.2008 20:57:43.036939 zmdc[13399].INF [Starting pending process, zmc -m 3]
06.05.2008 20:57:43.042221 zmdc[13399].INF ['zmc -m 3' starting at 08/05/06 20:57:43, pid = 15606]
06.05.2008 20:57:43.266568 zmdc[13399].ERR ['zmc -m 3' exited abnormally, exit status 11]

I think he just can't establish the connection, but https is up and working via web frontend.

Does zoneminder even support getting cam streams over https? What should be done for this? Is there any possibility I could tune it myself, if it's not?

Thanks in advance for your great work,
best regards
Robert