ZoneMinder Forums

Hi,

i try to install the GRANDTEC ip camera plus on Zoneminder but no video appears.

Remote Host Name IPcam-01
Remote Host Port 80
Remote Host Path http://user:pass@ip/video.cgi

(Also,i have tried with http://user:pass@ip/still.jpg)


-firefox
http://user:pass@ip/video.cgi ok

in VLC with the same URL ok

with wget http://user:pass@ip/still.jpg ok i capture one view

with wget http://user:pass@ip/video.cgi
--myboundary^M
Content-Type: image/jpeg^M
Content-Length: 019648^M
Content-Auth: 0F483F0B32ADD09^M
...

in zmdc.log
05/29/08 17:31:24.907261 zmdc[5171].INF ['zmc -m 10' starting at 08/05/29 17:31:24, pid = 8356]
05/29/08 17:31:24.957913 zmdc[5171].ERR ['zmc -m 10' exited abnormally, exit status 255]


Please, help me!
Thanks.

hmcinfo wrote: Remote Host Name IPcam-01
Remote Host Port 80
Remote Host Path http://user:pass@ip/video.cgi

Should be :

Remote Host Name user:pass@ip
Remote Host Port 80
Remote Host Path video.cgi

And the camera name is defined under the first tab.

thanks for your proposition but it is not good

Already the same problem

Okay, so raise your debug level and see what the logs say.

thanks a lot

it works!

the good configuration is:

Remote Host Name user:pass@ip
Remote Host Port 80
Remote Host Path /video.cgi "don't forget /"

what do you think of the camera so far, is it good camera?do you have problem with the camera? because i am planing to buy this camera and put it outdoor with my own housing, so i need to know if this camera durable enough with constant heat
thanks.