ZoneMinder Forums

Hi to all,

I've this problem, i want capture image of composite... I install Zoneminder in a Debia Etch and set the card Empire Enjoy TV with chipset SAA7131e. I've modify this files:

/etc/modprobe.d/

options: options saa7134 card=65 tuner=54 i2c_scan=1

aliases: alias char-major-81 videodev
alias char-major-81-0 saa7134

blacklist: blacklist sa7134-alsa

/etc/modules

saa7134

and the result of dmesg|grep saa is:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 193, latency: 32, mmio: 0xdffff800
saa7133[0]: subsystem: 17de:7136, board: V-Stream Studio TV Terminator [card=65,insmod option]
saa7133[0]: board init: gpio is 40
input: saa7134 IR (V-Stream Studio TV as /class/input/input2
saa7133[0]: i2c eeprom 00: de 17 36 71 10 28 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c scan: found device @ 0x96 [???]
saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
tuner 0-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0

but when I go to http://ip-pc/zm and click on the monitor i receive only blackscreen.

I need some help...