Page 1 of 1
VGA to BNC
Posted: Mon Aug 11, 2008 7:39 pm
by xJJsilvax
Hi,
we have 8 video Cameras That go from a 8 Bnc to 1 VGA which is plugged into a PCI slot. Will ZoneMinder work with this device?
Thanks in advance!
Posted: Mon Aug 11, 2008 8:03 pm
by Lee Sharp
I have dozens of those. Some work, and some don't. The ones with the game port work best...
Hint, you might want to tell us what card you are using.
Posted: Mon Aug 11, 2008 8:59 pm
by xJJsilvax
Hey, thanks for your quick reply
I pulled out the card and there is no model number or anything and we dont have any docs on it (of course)
It has 2 - 3 row 15 PIn female ports. and 2 Yellow RCA ports.
It came with a FOXCONN System. Any ideas?
Thanks alot!
Posted: Wed Aug 13, 2008 8:34 pm
by Lee Sharp
You have to take a picture.
Posted: Wed Aug 13, 2008 11:58 pm
by xJJsilvax
Posted: Fri Aug 15, 2008 11:28 pm
by Lee Sharp
Dead link...
Posted: Tue Aug 19, 2008 10:27 pm
by xJJsilvax
sorry try again...
Posted: Tue Aug 19, 2008 10:42 pm
by cordel
Still dead links.
Posted: Tue Aug 19, 2008 10:54 pm
by xJJsilvax
Ok the card i have is a Conxeant Fusion 878A. I am running Ubuntu 6.06. iS this setup compatable with Zoneminder. and does anyone know of any good howto's?
Posted: Tue Aug 19, 2008 11:32 pm
by cordel
xJJsilvax wrote:Ok the card i have is a Conxeant Fusion 878A. I am running Ubuntu 6.06. iS this setup compatable with Zoneminder. and does anyone know of any good howto's?
Conxeant Fusion 878A is a chip on the board, still not a board manufacturer/model or descriptive enough to give you anything useful. And allot of boards have that chip.
You could try card=77 but there is no guarantees as I have no idea what you got.
Plenty of info about v4l:
http://linuxtv.org/v4lwiki/index.php/
Posted: Wed Aug 20, 2008 6:39 pm
by Lee Sharp
xJJsilvax wrote:Ok the card i have is a Conxeant Fusion 878A. I am running Ubuntu 6.06. iS this setup compatable with Zoneminder. and does anyone know of any good howto's?
Chip, not board, as stated... Need them pics...
http://www.google.com/search?q=free+picture+upload
Also 6.06 is old and will not support the current version. However, Hardy is still too buggy in my opinion. I and using Gutsy, and it is very stable. (This is about 40 desktops and servers, as well as ZM)
