Page 1 of 2
Ubuntu 8.10, ZM 1.23.3-3 and no image --Now Bad image
Posted: Thu Dec 04, 2008 12:05 am
by Cartsy
I'm using Ubuntu 8.10 and Zoneminder 1.23.3-3 and can't get an image out of it.
When I type:
Code: Select all
~$ zmu -d /dev/video1 -q -v
Aborted
But if I use sudo:
Code: Select all
~$ sudo zmu -d /dev/video1 -q -v
Video Capabilities
Name: USB Camera (046d:08a2)
Type: 1
Can capture
Video Channels: 1
Audio Channels: 0
Maximum Width: 640
Maximum Height: 480
Minimum Width: 48
Minimum Height: 32
Window Attributes
X Offset: 0
Y Offset: 0
Width: 640
Height: 480
Picture Attributes
Palette: 0 - Unknown
Colour Depth: 8
Brightness: 32896
Hue: 0
Colour :0
Contrast: 32768
Whiteness: 39321
Channel 0 Attributes
Name: zc3xx
Channel: 0
Flags: 0
Type: 2 - Camera
Format: 0 - PAL
I don't have rights for zmu? For example:
Code: Select all
~$ sudo zmu -l
Id Func State TrgState LastImgTim RdIdx WrIdx LastEvt FrmRate
/var/log/syslog.log says:
Code: Select all
Dec 4 00:06:41 cath-laptop zmwatch[5841]: ERR [Can't get shared memory id '7a6d0001', 1: No such file or directory]
Dec 4 00:06:41 cath-laptop zmwatch[5841]: INF [Restarting capture daemon for testi, shared memory not valid]
Dec 4 00:06:42 cath-laptop zmdc[5809]: INF ['zmc -d /dev/video1' starting at 08/12/04 00:06:42, pid = 9260]
Dec 4 00:06:42 cath-laptop zmdc[9260]: INF ['zmc -d /dev/video1' started at 08/12/04 00:06:42]
Dec 4 00:06:42 cath-laptop zmwatch[5841]: INF ['zmc -d /dev/video1' starting at 08/12/04 00:06:42, pid = 9260]
Dec 4 00:06:42 cath-laptop zmc_dvideo1[9260]: INF [Debug Level = 0, Debug Log = <none>]
Dec 4 00:06:42 cath-laptop zmc_dvideo1[9260]: ERR [Can't shmget, probably not enough shared memory space free: Invalid argument]
Dec 4 00:06:42 cath-laptop zmdc[5809]: ERR ['zmc -d /dev/video1' exited abnormally, exit status 255]
My webcam works fine with other programs but not with Zoneminder..
What should I do?
Posted: Thu Dec 04, 2008 12:14 am
by cordel
Check that zmfix has the setuid and if not:
sudo chmod 4755 /usr/bin/zmfix
Posted: Thu Dec 04, 2008 10:02 am
by Cartsy
Thanks, but no help. Source stays red.
Should I try an older version of ZM?
Edit: I think I have rights to /dev/video1 because "cat /dev/video1" works fine.
Edit2: I did nothing and the source seems to be yellow now. Still no picture.
Posted: Thu Dec 04, 2008 5:08 pm
by Lee Sharp
As a user, try 'zmfix' and tell me what it returns. After it runs, try 'ls /dev/vid* -lah' and tell me what that returns.
Posted: Fri Dec 05, 2008 6:06 pm
by Cartsy
zmfix returns nothing.
ls /dev/vid* -lah returns:
crw-rw----+ 1 root video 81, 0 2008-12-05 20:00 /dev/video0
crw-rw-rw-+ 1 root video 81, 0 2008-12-05 20:00 /dev/video1
I did that shared memory thing and now /var/log/syslog.log says:
Dec 5 20:10:26 cath-laptop zmwatch[5465]: INF [Restarting capture daemon for New, time since last capture 9 seconds (1228500626-1228500617)]
Dec 5 20:10:26 cath-laptop zmdc[5431]: INF ['zmc -d /dev/video1' starting at 08/12/05 20:10:26, pid = 7396]
Dec 5 20:10:26 cath-laptop zmdc[7396]: INF ['zmc -d /dev/video1' started at 08/12/05 20:10:26]
Dec 5 20:10:26 cath-laptop zmwatch[5465]: INF ['zmc -d /dev/video1' starting at 08/12/05 20:10:26, pid = 7396]
Dec 5 20:10:26 cath-laptop zmc_dvideo1[7396]: INF [Debug Level = 0, Debug Log = <none>]
Dec 5 20:10:26 cath-laptop zmc_dvideo1[7396]: INF [Starting Capture]
Dec 5 20:10:27 cath-laptop zmc_dvideo1[7396]: ERR [Sync failure for frame 1 buffer 2(1): Invalid argument]
Dec 5 20:10:27 cath-laptop zmdc[5431]: ERR ['zmc -d /dev/video1' exited abnormally, exit status 255]
Edit: And suddenly it starts working. I did nothing. Just few clicks with those zone things in Watch window. Sometimes source is red, sometimes it might be yellow..
This is how it "works":
http://e.imagehost.org/view/0288/eiei It takes this crappy image every 10 seconds.
Edit2: Doesn't help if I change the resolution of the cam.
Edit3: My cam is Labtec webcam pro. Any suggestions of cheap cams that should work with ZM?
Posted: Thu Dec 18, 2008 3:28 pm
by alexm
Hello Cartsy,
Did you get you webcam to work in the end? I have experienced what looks like exactly the same problem except that my webcams used to work. I had Zoneminder running perfectly under openSuse but have just migrated to Ubuntu 8.10 and now I get the same error messages as you.
The cameras work when using other programs e.g. xawtv.
The cameras I have came in the "Creative - Webcam Vista Skype Dual Pack" from PC World (lsusb shows it as 041e:405f Creative Technology, Ltd).
Posted: Thu Jan 29, 2009 12:47 pm
by liviab
We're three with the same problem.
My log file is showing the same messages that the Cartsy's is.
My camera also works fine with other programs, such as cheese and xawtv.
By the way, I'm using ZoneMinder-1.24.0 and Fedora 10.
Anyone can help us? ^^
Posted: Thu Jan 29, 2009 1:35 pm
by wisekki
I'm joining this club.. in case you didn't see my previous posts
Posted: Thu Jan 29, 2009 1:42 pm
by liviab
so, we're four. heheh
Posted: Thu Jan 29, 2009 1:48 pm
by wisekki
Because I'm out of ideas i'm just going to ask what modules you are using for your cams? Could a faulty module do all this?
I tried to compile gspca from a source but it didn't work because it can't find semaphore.h for some reason.
Posted: Thu Jan 29, 2009 1:59 pm
by liviab
The command dmesg is showing:
Linux video capture interface: v2.00
gspca: main v2.2.0 registered
gspca: probing 041e:4051
zc3xx: Sensor Tas5130 (VF0250)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
So I think that it is gspca with the module zc3xx.
Posted: Thu Jan 29, 2009 2:12 pm
by kylejohnson
Looks like a permission issue. I usually have to add the user that ZoneMinder is running as (www-data) to the video group. Have you tried this?
Posted: Thu Jan 29, 2009 2:17 pm
by liviab
It doesn't work...
Code: Select all
[root@livia ~]# usermod -a -G video www-data
usermod: user www-data does not exist
Posted: Thu Jan 29, 2009 3:38 pm
by kylejohnson
liviab wrote:It doesn't work...
Code: Select all
[root@livia ~]# usermod -a -G video www-data
usermod: user www-data does not exist
Ergh. The original poster is using Ubuntu, on which apache runs as www-data. Which distro are you using? Just substitute www-data for the user that apache (or ZoneMinder) is running as.
Posted: Thu Jan 29, 2009 4:36 pm
by wisekki
liviab wrote:
So I think that it is gspca with the module zc3xx.
Yeah same here and the same errors as you...
Code: Select all
[32054.304018] usb 3-1: new full speed USB device using uhci_hcd and address 3
[32054.495438] usb 3-1: configuration #1 chosen from 1 choice
[32054.498216] gspca: probing 046d:08d7
[32056.148100] zc3xx: probe 2wr ov vga 0x0000
[32056.192097] zc3xx: probe sensor -> 11
[32056.192101] zc3xx: Find Sensor HV7131R(c)
[32056.198599] gspca: probe ok
[32056.198638] gspca: probing 046d:08d7
So it could have something to do with the module.. ?
