Code: Select all
[ 0.000000] PERCPU: Allocating 45852 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1036751
[ 0.000000] Kernel command line: root=UUID=368686ba-f405-43ca-b9d8-74dc0d3ee466 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 3400.067 MHz processor.
[ 0.010000] Console: colour VGA+ 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 4131672k/5242880k available (2628k kernel code, 60548k reserved, 1201k data, 436k init, 3275968k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xffc78000 - 0xfffff000 (3612 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.010000] .init : 0xc04c3000 - 0xc0530000 ( 436 kB)
[ 0.010000] .data : 0xc0391026 - 0xc04bd800 (1201 kB)
[ 0.010000] .text : 0xc0100000 - 0xc0391026 (2628 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.010016] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.13 BogoMIPS (lpj=34000670)
[ 0.010041] Security Framework initialized
[ 0.010053] SELinux: Disabled at boot.
[ 0.010083] AppArmor: AppArmor initialized
[ 0.010099] Mount-cache hash table entries: 512
[ 0.010348] Initializing cgroup subsys ns
[ 0.010354] Initializing cgroup subsys cpuacct
[ 0.010358] Initializing cgroup subsys memory
[ 0.010381] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.010384] CPU: L2 cache: 1024K
[ 0.010387] CPU: Physical Processor ID: 0
[ 0.010392] using mwait in idle threads.
[ 0.010407] Checking 'hlt' instruction... OK.
[ 0.052630] ACPI: Core revision 20080609
[ 0.055489] ACPI: Checking initramfs for custom DSDT
[ 0.352443] ENABLING IO-APIC IRQs
[ 0.352624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.452638] CPU0: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
[ 0.460000] Booting processor 1/6 ip 6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 6800.49 BogoMIPS (lpj=34002461)
[ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.010000] CPU: L2 cache: 1024K
[ 0.010000] CPU: Physical Processor ID: 3
[ 0.610358] CPU1: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
[ 0.610372] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.620115] Booting processor 2/1 ip 6000
[ 0.010000] Initializing CPU#2
[ 0.010000] Calibrating delay using timer specific routine.. 6800.45 BogoMIPS (lpj=34002283)
[ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.010000] CPU: L2 cache: 1024K
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.780388] CPU2: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
[ 0.780415] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.790165] Booting processor 3/7 ip 6000
[ 0.010000] Initializing CPU#3
[ 0.010000] Calibrating delay using timer specific routine.. 6800.53 BogoMIPS (lpj=34002665)
[ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.010000] CPU: L2 cache: 1024K
[ 0.010000] CPU: Physical Processor ID: 3
[ 0.950289] CPU3: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
[ 0.950314] checking TSC synchronization [CPU#0 -> CPU#3]:
[ 0.960000] Measured 94 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.960000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.960011] Brought up 4 CPUs
[ 0.960016] Total of 4 processors activated (27201.61 BogoMIPS).
[ 0.960047] CPU0 attaching sched-domain:
[ 0.960051] domain 0: span 0,2 level SIBLING
[ 0.960054] groups: 0 2
[ 0.960062] domain 1: span 0-3 level CPU
[ 0.960065] groups: 0,2 1,3
[ 0.960072] CPU1 attaching sched-domain:
[ 0.960074] domain 0: span 1,3 level SIBLING
[ 0.960077] groups: 1 3
[ 0.960081] domain 1: span 0-3 level CPU
[ 0.960084] groups: 1,3 0,2
[ 0.960090] CPU2 attaching sched-domain:
[ 0.960092] domain 0: span 0,2 level SIBLING
[ 0.960095] groups: 2 0
[ 0.960099] domain 1: span 0-3 level CPU
[ 0.960102] groups: 0,2 1,3
[ 0.960108] CPU3 attaching sched-domain:
[ 0.960112] domain 0: span 1,3 level SIBLING
[ 0.960115] groups: 3 1
[ 0.960119] domain 1: span 0-3 level CPU
[ 0.960122] groups: 1,3 0,2
[ 0.960251] net_namespace: 840 bytes
[ 0.960251] Booting paravirtualized kernel on bare hardware
[ 0.960349] Time: 17:55:35 Date: 12/04/08
[ 0.960387] NET: Registered protocol family 16
[ 0.960418] EISA bus registered
[ 0.960418] ACPI: bus type pci registered
[ 0.960418] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[ 0.960418] PCI: Using configuration type 1 for base access
[ 0.960873] ACPI: EC: Look up EC in DSDT
[ 0.977458] ACPI: Interpreter enabled
[ 0.977462] ACPI: (supports S0 S1 S4 S5)
[ 0.977483] ACPI: Using IOAPIC for interrupt routing
[ 0.990182] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.990182] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.990186] pci 0000:00:02.0: PME# disabled
[ 0.990234] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.990238] pci 0000:00:03.0: PME# disabled
[ 0.990348] PCI: 0000:00:1d.0 reg 20 io port: [a880, a89f]
[ 0.990401] PCI: 0000:00:1d.1 reg 20 io port: [ac00, ac1f]
[ 0.990437] PCI: 0000:00:1d.4 reg 10 32bit mmio: [dedffc00, dedffc0f]
[ 0.990615] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.990623] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.990628] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.990648] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.990655] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.990663] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.990670] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.990677] PCI: 0000:00:1f.1 reg 20 io port: [fc00, fc0f]
[ 0.990684] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
[ 0.990736] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.990803] PCI: bridge 0000:00:02.0 io port: [b000, bfff]
[ 0.990863] PCI: 0000:02:00.0 reg 10 64bit mmio: [deef0000, deefffff]
[ 0.990909] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.990914] pci 0000:02:00.0: PME# disabled
[ 0.990955] PCI: bridge 0000:00:03.0 io port: [c000, cfff]
[ 0.990959] PCI: bridge 0000:00:03.0 32bit mmio: [dee00000, deefffff]
[ 0.991020] PCI: bridge 0000:00:1c.0 io port: [d000, dfff]
[ 0.991071] PCI: 0000:04:03.0 reg 10 32bit mmio: [df000000, dfffffff]
[ 0.991079] PCI: 0000:04:03.0 reg 14 io port: [e000, e0ff]
[ 0.991087] PCI: 0000:04:03.0 reg 18 32bit mmio: [defff000, deffffff]
[ 0.991109] PCI: 0000:04:03.0 reg 30 32bit mmio: [defc0000, defdffff]
[ 0.991124] pci 0000:04:03.0: supports D1
[ 0.991126] pci 0000:04:03.0: supports D2
[ 0.991177] PCI: 0000:04:04.0 reg 10 64bit mmio: [defe0000, defeffff]
[ 0.991219] pci 0000:04:04.0: PME# supported from D3hot D3cold
[ 0.991224] pci 0000:04:04.0: PME# disabled
[ 0.991258] pci 0000:00:1e.0: transparent bridge
[ 0.991263] PCI: bridge 0000:00:1e.0 io port: [e000, efff]
[ 0.991267] PCI: bridge 0000:00:1e.0 32bit mmio: [def00000, dfffffff]
[ 0.991291] bus 00 -> node 0
[ 0.991300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.991683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.991897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
[ 0.992070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0._PRT]
[ 0.992177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA1._PRT]
[ 0.992475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.992475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.992475] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.992475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.992475] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.992475] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.992475] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.992475] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.992475] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B2, should be A7 [20080609]
[ 0.992475] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.992475] pnp: PnP ACPI init
[ 0.992475] ACPI: bus type pnp registered
[ 1.001347] pnp: PnP ACPI: found 13 devices
[ 1.001347] ACPI: ACPI bus type pnp unregistered
[ 1.001347] PnPBIOS: Disabled by ACPI PNP
[ 1.001347] PCI: Using ACPI for IRQ routing
[ 1.030019] NET: Registered protocol family 8
[ 1.030022] NET: Registered protocol family 20
[ 1.030052] NetLabel: Initializing
[ 1.030052] NetLabel: domain hash size = 128
[ 1.030052] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.030052] NetLabel: unlabeled traffic allowed by default
[ 1.031236] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 1.031239] actual entries 65620
[ 1.031404] AppArmor: AppArmor Filesystem Enabled
[ 1.031424] ACPI: RTC can wake from S4
[ 1.050046] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 1.050051] system 00:06: ioport range 0x290-0x297 has been reserved
[ 1.050062] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.050066] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.050070] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 1.050075] system 00:07: iomem range 0xfec10000-0xfec1ffff has been reserved
[ 1.050083] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 1.050087] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 1.050095] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 1.050099] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.050108] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.050117] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 1.050120] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
[ 1.050124] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 1.050127] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
[ 1.050130] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
[ 1.085972] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 1.085977] pci 0000:00:02.0: IO window: 0xb000-0xbfff
[ 1.085982] pci 0000:00:02.0: MEM window: disabled
[ 1.085986] pci 0000:00:02.0: PREFETCH window: disabled
[ 1.085993] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.085997] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 1.086002] pci 0000:00:03.0: MEM window: 0xdee00000-0xdeefffff
[ 1.086007] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.086013] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 1.086017] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 1.086022] pci 0000:00:1c.0: MEM window: disabled
[ 1.086026] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.086034] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.086038] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 1.086044] pci 0000:00:1e.0: MEM window: 0xdef00000-0xdfffffff
[ 1.086049] pci 0000:00:1e.0: PREFETCH window: 0x000000c2000000-0x000000c20fffff
[ 1.086071] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.086077] pci 0000:00:02.0: setting latency timer to 64
[ 1.086086] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.086091] pci 0000:00:03.0: setting latency timer to 64
[ 1.086103] pci 0000:00:1e.0: setting latency timer to 64
[ 1.086108] bus: 00 index 0 io port: [0, ffff]
[ 1.086111] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 1.086113] bus: 01 index 0 io port: [b000, bfff]
[ 1.086116] bus: 01 index 1 mmio: [0, 0]
[ 1.086118] bus: 01 index 2 mmio: [0, 0]
[ 1.086120] bus: 01 index 3 mmio: [0, 0]
[ 1.086122] bus: 02 index 0 io port: [c000, cfff]
[ 1.086124] bus: 02 index 1 mmio: [dee00000, deefffff]
[ 1.086126] bus: 02 index 2 mmio: [0, 0]
[ 1.086128] bus: 02 index 3 mmio: [0, 0]
[ 1.086130] bus: 03 index 0 io port: [d000, dfff]
[ 1.086132] bus: 03 index 1 mmio: [0, 0]
[ 1.086134] bus: 03 index 2 mmio: [0, 0]
[ 1.086136] bus: 03 index 3 mmio: [0, 0]
[ 1.086138] bus: 04 index 0 io port: [e000, efff]
[ 1.086141] bus: 04 index 1 mmio: [def00000, dfffffff]
[ 1.086143] bus: 04 index 2 mmio: [c2000000, c20fffff]
[ 1.086145] bus: 04 index 3 io port: [0, ffff]
[ 1.086147] bus: 04 index 4 mmio: [0, ffffffffffffffff]
[ 1.086161] NET: Registered protocol family 2
[ 1.090019] Switched to high resolution mode on CPU 0
[ 1.090057] Switched to high resolution mode on CPU 1
[ 1.090449] Switched to high resolution mode on CPU 2
[ 1.099993] Switched to high resolution mode on CPU 3
[ 1.120109] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.120484] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.121225] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.121763] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.121768] TCP reno registered
[ 1.140187] NET: Registered protocol family 1
[ 1.140346] checking if image is initramfs... it is
[ 1.759579] Freeing initrd memory: 8327k freed
[ 1.762753] audit: initializing netlink socket (disabled)
[ 1.762787] type=2000 audit(1228413335.760:1): initialized
[ 1.768207] highmem bounce pool size: 64 pages
[ 1.768223] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.772433] VFS: Disk quotas dquot_6.5.1
[ 1.772616] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.772798] msgmni has been set to 1689
[ 1.773005] io scheduler noop registered
[ 1.773009] io scheduler anticipatory registered
[ 1.773012] io scheduler deadline registered (default)
[ 1.773029] io scheduler cfq registered
[ 1.773114] pci 0000:04:03.0: Boot video device
[ 1.773282] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.773311] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.773469] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.773498] pci_express 0000:00:03.0:pcie00: allocate port service
[ 1.774282] isapnp: Scanning for PnP cards...
[ 2.128798] isapnp: No Plug & Play device found
[ 2.195176] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.195362] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.195565] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.196603] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.197053] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.200803] brd: module loaded
[ 2.200943] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.201328] PNP: No PS/2 controller found. Probing ports directly.
[ 2.203534] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.203544] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.234023] mice: PS/2 mouse device common for all mice
[ 2.234291] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.234316] rtc0: alarms up to one month
[ 2.234615] EISA: Probing bus 0 at eisa.0
[ 2.234661] EISA: Detected 0 cards.
[ 2.234666] cpuidle: using governor ladder
[ 2.234670] cpuidle: using governor menu
[ 2.235391] TCP cubic registered
[ 2.235428] Using IPI No-Shortcut mode
[ 2.235782] registered taskstats version 1
[ 2.235931] Magic number: 4:32:946
[ 2.235958] tty ttya1: hash matches
[ 2.236061] tty tty3: hash matches
[ 2.236126] rtc_cmos 00:02: setting system clock to 2008-12-04 17:55:37 UTC (1228413337)
[ 2.236130] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.236132] EDD information not available.
[ 2.236556] Freeing unused kernel memory: 436k freed
[ 2.236680] Write protecting the kernel text: 2632k
[ 2.236742] Write protecting the kernel read-only data: 956k
[ 2.339961] fuse init (API version 7.9)
[ 2.368164] ACPI: SSDT BFF342A0, 02FC (r1 AMI CPU1PM 1 INTL 2002026)
[ 2.368587] processor ACPI0007:00: registered as cooling_device0
[ 2.368593] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.368744] ACPI: SSDT BFF345A0, 02FC (r1 AMI CPU2PM 1 INTL 2002026)
[ 2.369159] processor ACPI0007:01: registered as cooling_device1
[ 2.369328] ACPI: SSDT BFF348A0, 0292 (r1 AMI CPU3PM 1 INTL 2002026)
[ 2.369688] processor ACPI0007:02: registered as cooling_device2
[ 2.369915] ACPI: SSDT BFF34B40, 0292 (r1 AMI CPU4PM 1 INTL 2002026)
[ 2.370306] processor ACPI0007:03: registered as cooling_device3
[ 2.390986] device-mapper: uevent: version 1.0.3
[ 2.391443] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.699182] usbcore: registered new interface driver usbfs
[ 2.699238] usbcore: registered new interface driver hub
[ 2.699330] usbcore: registered new device driver usb
[ 2.705048] USB Universal Host Controller Interface driver v3.0
[ 2.705198] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.705225] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.705233] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.705360] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.705423] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a880
[ 2.705978] usb usb1: configuration #1 chosen from 1 choice
[ 2.706053] hub 1-0:1.0: USB hub found
[ 2.706080] hub 1-0:1.0: 2 ports detected
[ 2.724499] No dock devices found.
[ 2.746871] SCSI subsystem initialized
[ 2.785330] libata version 3.00 loaded.
[ 2.923232] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.923251] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.923258] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.923313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.923356] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
[ 2.923608] usb usb2: configuration #1 chosen from 1 choice
[ 2.923668] hub 2-0:1.0: USB hub found
[ 2.923685] hub 2-0:1.0: 2 ports detected
[ 3.034381] tg3.c:v3.94 (August 14, 2008)
[ 3.034417] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.034435] tg3 0000:02:00.0: setting latency timer to 64
[ 3.042604] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.079787] eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:13:d4:69:fe:d4
[ 3.079796] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.079802] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.079886] tg3 0000:04:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.173828] eth1: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:13:d4:69:fe:d5
[ 3.173834] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 3.173838] eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 3.178683] ata_piix 0000:00:1f.1: version 2.12
[ 3.178710] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.178775] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.179100] scsi0 : ata_piix
[ 3.179321] scsi1 : ata_piix
[ 3.182662] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 3.182667] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.346609] usb 1-1: configuration #1 chosen from 1 choice
[ 3.551253] ata1.00: ATA-5: WDC WD400BB-00CLB0, 05.04E05, max UDMA/100
[ 3.551259] ata1.00: 78165360 sectors, multi 16: LBA
[ 3.551290] ata1.01: ATAPI: LITE-ON DVDRW SHW-1635S, YS0N, max UDMA/66
[ 3.592393] ata1.00: configured for UDMA/100
[ 3.630253] ata1.01: configured for UDMA/66
[ 3.831438] ata2.00: ATA-6: WDC WD1200BB-00DWA0, 15.05R15, max UDMA/100
[ 3.831443] ata2.00: 234441648 sectors, multi 16: LBA48
[ 3.831690] ata2.01: ATA-7: ExcelStor Technology J8080, P21OA60A, max UDMA/133
[ 3.831694] ata2.01: 160836480 sectors, multi 16: LBA48
[ 3.871348] ata2.00: configured for UDMA/100
[ 3.910478] ata2.01: configured for UDMA/100
[ 3.910659] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00CL 05.0 PQ: 0 ANSI: 5
[ 3.911656] scsi 0:0:1:0: CD-ROM LITE-ON DVDRW SHW-1635S YS0N PQ: 0 ANSI: 5
[ 3.911855] scsi 1:0:0:0: Direct-Access ATA WDC WD1200BB-00D 15.0 PQ: 0 ANSI: 5
[ 3.912015] scsi 1:0:1:0: Direct-Access ATA ExcelStor Techno P21O PQ: 0 ANSI: 5
[ 3.926683] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.926732] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 3.926778] scsi 1:0:0:0: Attached scsi generic sg2 type 0
[ 3.926825] scsi 1:0:1:0: Attached scsi generic sg3 type 0
[ 3.949370] Driver 'sr' needs updating - please use bus_type methods
[ 3.954059] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.954071] Uniform CD-ROM driver Revision: 3.20
[ 3.954261] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 3.955109] Driver 'sd' needs updating - please use bus_type methods
[ 3.955290] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 3.955328] sd 0:0:0:0: [sda] Write Protect is off
[ 3.955332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.955391] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.955520] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 3.955553] sd 0:0:0:0: [sda] Write Protect is off
[ 3.955556] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.955613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.955618] sda: sda1 sda2 <sda5>
[ 3.999223] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.999330] sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 3.999363] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.999366] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.999440] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.999542] sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 3.999572] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.999575] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.999629] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.999634] sdb: sdb1
[ 4.019034] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.019193] sd 1:0:1:0: [sdc] 160836480 512-byte hardware sectors (82348 MB)
[ 4.019242] sd 1:0:1:0: [sdc] Write Protect is off
[ 4.019247] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.019327] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.019470] sd 1:0:1:0: [sdc] 160836480 512-byte hardware sectors (82348 MB)
[ 4.019516] sd 1:0:1:0: [sdc] Write Protect is off
[ 4.019521] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.019595] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.019604] sdc: sdc1
[ 4.032335] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 4.275657] PM: Starting manual resume from disk
[ 4.275663] PM: Resume from partition 8:5
[ 4.275665] PM: Checking hibernation image.
[ 4.275837] PM: Resume from disk failed.
[ 4.333529] kjournald starting. Commit interval 5 seconds
[ 4.333546] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.072899] udevd version 124 started
[ 7.525701] intel_rng: FWH not detected
[ 7.614993] iTCO_vendor_support: vendor-support=0
[ 7.619033] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 7.619157] iTCO_wdt: Found a 6300ESB TCO device (Version=1, TCOBASE=0x0860)
[ 7.619344] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.631600] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 7.649091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.666232] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.693082] EDAC MC: Ver: 2.1.0 Oct 24 2008
[ 7.776792] EDAC e752x: tolm = c0000, remapbase = 100000, remaplimit = 13c000
[ 7.776896] EDAC MC0: Giving out device to 'e752x_edac' 'E7320': DEV 0000:00:00.0
[ 7.776994] EDAC PCI0: Giving out device to module 'e752x_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 7.999943] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.142799] ACPI: Power Button (FF) [PWRF]
[ 8.143005] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.302775] ACPI: Power Button (CM) [PWRB]
[ 8.475809] Linux video capture interface: v2.00
[ 8.597334] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ca)
[ 8.644770] input: UVC Camera (046d:08ca) as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input4
[ 8.735525] usbcore: registered new interface driver snd-usb-audio
[ 8.735547] usbcore: registered new interface driver uvcvideo
[ 8.735568] USB Video Class driver (v0.1.0)
[ 10.118171] loop: module loaded
[ 10.178038] lp: driver loaded but no devices found
[ 10.535923] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k
[ 11.024148] EXT3 FS on sda1, internal journal
[ 11.492029] kjournald starting. Commit interval 5 seconds
[ 11.492245] EXT3 FS on sdc1, internal journal
[ 11.492255] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.518726] kjournald starting. Commit interval 5 seconds
[ 11.519205] EXT3 FS on sdb1, internal journal
[ 11.519213] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.284264] type=1505 audit(1228413347.281:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4053
[ 12.284602] type=1505 audit(1228413347.281:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4053
[ 12.326167] type=1505 audit(1228413347.318:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4057
[ 12.380915] type=1505 audit(1228413347.368:5): operation="profile_load" name="/usr/sbin/named" name2="default" pid=4061
[ 12.645362] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.811721] NET: Registered protocol family 10
[ 13.812365] lo: Disabled Privacy Extensions
[ 13.813433] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 14.629983] tg3: eth1: Link is up at 100 Mbps, full duplex.
[ 14.629988] tg3: eth1: Flow control is off for TX and off for RX.
[ 14.630175] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.051980] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 18.391096] type=1503 audit(1228413350.142:6): operation="capable" name="sys_resource" pid=4522 profile="/usr/sbin/named"
[ 18.391457] type=1503 audit(1228413350.142:7): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=104 name="/proc/4521/net/if_inet6" pid=4522 profile="/usr/sbin/named"
[ 24.993776] eth1: no IPv6 routers present
[ 26.605320] ppdev: user-space parallel port driver
[ 27.815249] Bridge firewalling registered
[ 27.816198] vnet0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 27.847030] vnet0: starting userspace STP failed, starting kernel STP
[ 28.370782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 28.371113] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
[ 28.371118] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 28.371123] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 38.683775] vnet0: no IPv6 routers present
[ 1727.504363] process `miniserv.pl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
[ 1727.580499] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1727.580507] CSLIP: code copyright 1989 Regents of the University of California.
[ 1727.580511] SLIP linefill/keepalive option.
[ 1727.689349] PPP generic driver version 2.4.2
[ 1727.795283] NET: Registered protocol family 3
[ 1727.816869] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[ 1727.884413] AX.25: 6pack driver, Revision: 0.3.0
[ 1727.960047] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 1728.067296] irda_init()
[ 1728.067319] NET: Registered protocol family 23
[ 1728.175941] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
[ 1728.175951] N_HDLC line discipline registered.
[ 1728.274805] Bluetooth: Core ver 2.13
[ 1728.274965] NET: Registered protocol family 31
[ 1728.274971] Bluetooth: HCI device and connection manager initialized
[ 1728.274977] Bluetooth: HCI socket layer initialized
[ 1728.293709] Bluetooth: HCI UART driver ver 2.2
[ 1728.293717] Bluetooth: HCI H4 protocol initialized
[ 1728.293721] Bluetooth: HCI BCSP protocol initialized
[ 1728.293726] Bluetooth: HCILL protocol initialized
[ 1728.368009] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 1728.399775] gigaset: Hansjoerg Lipp <hjlipp>, Tilman Schmidt <tilman>, Stefan Eilers
[ 1728.399785] gigaset: Driver for Gigaset 307x
[ 3618.397534] type=1503 audit(1228416950.149:8): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=104 name="/proc/4521/net/if_inet6" pid=4524 profile="/usr/sbin/named"
[ 7218.397568] type=1503 audit(1228420550.149:9): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=104 name="/proc/4521/net/if_inet6" pid=4524 profile="/usr/sbin/named"
[10818.397622] type=1503 audit(1228424150.141:10): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=104 name="/proc/4521/net/if_inet6" pid=4523 profile="/usr/sbin/named"